The fabrication of Ti3C2 and Ti3CN MXenes by electrochemical etching

Ian Kinloch,Kai Chio Chan,Xiang Guan,Teng Zhang,Kailing Lin,Yihe Huang,Lingshu Lei,Yiannis Georgantas,Yury Gogotsi,Mark A. Bissett

DOI: https://doi.org/10.26434/chemrxiv-2024-qf7hk-v2

2024-04-18

Abstract:2D MXenes are well-known for their outstanding performance in electrochemical energy storage and many other applications owing to their high conductivity and specific surface area. An obstacle to the wider synthesis of MXenes for research and industrial applications is the use of hazardous hydrofluoric acid (HF) during their synthesis. Herein, we developed the electrochemical etching process for the synthesis of Ti3C2 and Ti3CN MXenes by using aqueous tetrafluoroboric acid as the electrolyte, thus only involving a very low concentration of HF. The effect of electrical potential and temperature on the etching rate is studied and compared to chemical etching with HBF4. A mechanism based on the selective anodic dissolution of aluminium from the Ti3AlC2 and Ti3AlCN with the tetrafluoroborate ion is proposed. The MXene formation was confirmed by Raman spectroscopy, X-ray photoelectron spectroscopy, X-ray diffraction and electron microscopy. The MXene flakes from the electrochemical etching process have larger lateral dimensions compared to chemically etched MXene flakes as a result of the suppression of the HF decomposition and rapid etching rate. The electrodes of lithium-ion supercapacitors made from electrochemically etched Ti3C2 and Ti3CN exhibited cyclic performance and rate capabilities comparable to HF-etched MXenes.

Chemistry

What problem does this paper attempt to address?

The paper mainly discusses the issue of preparing Ti3C2 and Ti3CN MXene materials through electrochemical etching method. Traditional MXene synthesis methods usually involve the use of hazardous hydrofluoric acid (HF), which is both environmentally unfriendly and poses risks to equipment and personnel safety. Researchers have developed a new method using water-soluble tetrafluoroboric acid as the electrolyte for electrochemical etching, greatly reducing the concentration of HF used. They studied the effects of potential and temperature on the etching rate and compared it with chemical etching. The experiment showed that this method can more effectively control the formation of MXene, reduce HF decomposition, and obtain larger-sized MXene flakes, with electrochemical performance in lithium-ion supercapacitors comparable to HF-etched MXene. This method reduces the production cost of MXene, improves scalability, and reduces environmental hazards.

The fabrication of Ti3C2 and Ti3CN MXenes by electrochemical etching

MXene-transition Metal Sulfide Composite Electrodes for Supercapacitors: Synthesis and Electrochemical Characterization

Simplified Synthesis of Fluoride-Free Ti 3 C 2 T x via Electrochemical Etching toward High-Performance Electrochemical Capacitors

A Facile Etching Route for Preparing Ti 3 C 2 MXene with Enhanced Electrochemical Performance in Silver Nitrate Solution

Single‐Step Synthesis of Exfoliated Ti3C2Tx MXene through NaBF4/HCl Etching as Electrode Material for Asymmetric Supercapacitor

Synthesis of Ti3C2Fx MXene with controllable fluorination by electrochemical etching for lithium-ion batteries applications

Achieving Quick Charge/discharge Rate of 3.0 V S−1 by 2D Titanium Carbide (mxene) Via N-doped Carbon Intercalation

Comparative study on fabrication and energy storage performance of Ti3C2Tx MXene by using hydrofluoric acid and in situ forming of hydrofluoric acid‐based approaches

Electrochemical characterization of Ti3C2T MXene prepared via a molten salt etching route in an acetonitrile-based electrolyte

Fluoride‐Free Synthesis of 2D Titanium Carbide (MXenes) Assisted by scCO2‐Based Ternary Solution

Fast and High-Yield Anhydrous Synthesis of Ti3 C2 Tx MXene with High Electrical Conductivity and Exceptional Mechanical Strength

Fluoride‐Free Synthesis of Two‐Dimensional Titanium Carbide (MXene) Using A Binary Aqueous System

Ambient-Stable Two-Dimensional Titanium Carbide (MXene) Enabled by Iodine Etching

Supercritical etching method for the large-scale manufacturing of MXenes

Fluorine-Free Synthesis of High-Purity Ti3 C2 Tx (T=OH, O) via Alkali Treatment

Synthesis of Ti3C2 Mxene through In Situ HF and Direct HF Etching Procedures as Electrolyte Fillers in Dye-Sensitized Solar Cell

Synthesis of fluorine free MXene through lewis acidic etching for application as electrode of proton supercapacitors

Intensifying Electrochemical Activity of Ti3C2Tx MXene via Customized Interlayer Structure and Surface Chemistry

Mild and Efficient Method for the In Situ Preparation of High‐Quality MXene Materials Enabled by Hexafluoro Complex Anion Contained Salts Etching

An Organic Solvent-Assisted Intercalation and Collection (OAIC) for Ti3C2Tx MXene with Controllable Sizes and Improved Yield

Controllable Etching of Ti3SiC2 to Produce Fluorine‐Enriched, Hydrophobic 2D Titanium Carbide for Ultrastable Zinc Ion Batteries