Abstract:A mild in situ etching strategy using hexafluoro complex anion hydrolysis is innovatively proposed to prepare high‐quality MXene. A high yield of 28% single‐layer MXene is achieved through shaking the prepared Mxene. The versatility of the etching method is demonstrated by using varying hexafluoro complex salts. This work provides a promising pathway for the safe, straightforward, and sustainable production of MXene. MXene is a promising two‐dimensional (2D) material for energy storage applications owing to its exceptional conductivity and controllable surface chemistry. Currently, aqueous etching methods for the preparation of MXene sheets require a substantial quantity of HF or HCl, leading to issues such as structural defects in the MXene sheets and severe corrosiveness due to the acidic nature of these etchants. This study proposes a mild in situ etching strategy for the preparation of MXene materials through hexafluoro complex anion hydrolysis etching. Etching is accomplished by gradually introducing water into a suspension composed of hexafluoro complex, ethanol, and Ti3AlC2. This process results in the production of high‐quality MXene in a mild reaction environment with the weak acidity of the solution, making it suitable for scalable synthesis and process applications. Moreover, the inclusion of ethanol in the etching process increases the interlamellar spacing of MXene, thereby facilitating the stripping process and ultimately yielding of 28% in the production of single‐layer MXene through shaking. The MXene incorporated into the Si/C anode demonstrates a notable reversible cycling capacity of 563 mAh g−1 after 120 cycles, accompanied by an initial coulombic efficiency (CE) of 83%, surpassing the performance of Si/C anodes modified with carbon nanotubes (CNTs) and Super P. The approach presented in this study offers a promising pathway for the safe, straightforward, and sustainable production of high‐quality MXene materials.

Supercritical etching method for the large-scale manufacturing of MXenes

MXene-transition Metal Sulfide Composite Electrodes for Supercapacitors: Synthesis and Electrochemical Characterization

Ultrafast Synthesis of MXenes in Minutes via Low‐Temperature Molten Salt Etching

Supercritical CO2-assisted Solid-Phase Etching Preparation of MXenes for High-efficiency Alkaline Hydrogen Evolution

In Situ Synthesis of MXene with Tunable Morphology by Electrochemical Etching of MAX Phase Prepared in Molten Salt

Achieving Quick Charge/discharge Rate of 3.0 V S−1 by 2D Titanium Carbide (mxene) Via N-doped Carbon Intercalation

Thermal reduction of sulfur-containing MAX phase for MXene production

Mild and Efficient Method for the In Situ Preparation of High‐Quality MXene Materials Enabled by Hexafluoro Complex Anion Contained Salts Etching

The fabrication of Ti3C2 and Ti3CN MXenes by electrochemical etching

Solvent-Free One-Step Green Synthesis of Mxenes by “Gas-Phase Selective Etching”

Composite of Two-Dimensional Titanium Carbonitride Mxene and Nano-Sulfur As Cathode for Li-S Batteries

Novel Synthesis of Red Phosphorus Nanodot/Ti3C2Tx MXenes from Low-Cost Ti3SiC2 MAX Phases for Superior Lithium- and Sodium-Ion Batteries

A general Lewis acidic etching route for preparing MXenes with enhanced electrochemical performance in non-aqueous electrolyte

Eutectic Etching toward In‐Plane Porosity Manipulation of Cl‐Terminated MXene for High‐Performance Dual‐Ion Battery Anode

High‐Yield Exfoliation of Large MXene with Flake Sizes over 10 μm Using Edge‐Anchored Carbon Nanotubes

Synthesis of MAX Phase Nanofibers and Nanoflakes and the Resulting MXenes

New Ti3-yNbyC2Tx MXenes As High-Rate and Ultra-Stable Electrode Materials for Supercapacitors

Minutes‐Fast Production of Vacancy‐Enriched MXenes as an Efficient Platform for Single‐Atom Electrocatalysts

General and Fast Gas–Solid Synthesis of Functional MXenes and Derivatives on the Scale of Tens of Grams

An Organic Solvent-Assisted Intercalation and Collection (OAIC) for Ti3C2Tx MXene with Controllable Sizes and Improved Yield