Abstract:Electrochemical capacitors using neutral aqueous electrolytes are safer and cheaper and allow diverse current collectors compared with the counterparts using organic or acidic/alkaline electrolytes. Two-dimensional (2D) MXenes have been demonstrated as the high-capacitive materials with high rate performance. However, MXene electrodes often exhibit a limited capacitance in neutral electrolytes, where the reversible electrochemical reactions rely greatly on the structural and surface properties of MXenes depending on their synthesis methods. Herein, a simple and highly efficient strategy, which combines HF etching of Ti3AlC2 powder and subsequent amine-assisted delamination at a low temperature, is developed to synthesize 2D Ti3C2Tx MXenes. The comprehensive results demonstrate that the enlarged interlayer spacing and the presence of more −O-containing functional groups synergistically contribute to the improvement of capacitive performance in neutral electrolytes. The 2D Ti3C2Tx MXenes show excellent electrochemical performance in various neutral electrolytes, and a high specific gravimetric capacitance of 149.8 F/g is achieved in 1.0 M Li2SO4. Furthermore, the flexible solid-state supercapacitors (SCs) with a neutral PVA/LiCl gel electrolyte possess a superior areal capacitance (163.1 mF/cm2) and high energy density (17.6 μWh/cm2 at 0.07 mW/cm2), together with high user safety. This work provides a promising guideline of synthesis strategy for high-capacitive MXenes used in neutral electrolytes, which may promote the development of safe and flexible power sources with a high energy density.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c06161.Fractions extracted from Ti 2p and O 1s XPS spectra for Ti3C2Tx-TMAOH and Ti3C2Tx-HF samples; SEM images of raw Ti3AlC2 crystals and multilayered Ti3C2Tx after diluted HF etching of Ti3AlC2 for 2 h; digital photographs showing Tyndall scattering effects of Ti3C2Tx-TMAOH nanosheets dispersed in NMP; SEM image of the Ti3C2Tx-HF sample; AFM image of Ti3C2Tx-TMAOH nanosheets; XPS Al 2p and F 1s spectra of Ti3AlC2, Ti3C2Tx-HF, and Ti3C2Tx-TMAOH; XPS C 1s spectra of Ti3C2Tx-HF and Ti3C2Tx-TMAOH and their component peak fitting; CV curves of Ti3C2Tx-HF and Ti3C2Tx-TMAOH samples at scan rates from 0.5 to 100 mV/s in 1.0 M Na2SO4, 0.65 M K2SO4, and 1.0 M MgSO4; GCD curves of Ti3C2Tx-HF and Ti3C2Tx-TMAOH samples at current densities from 0.5 to 50 A/g in 1.0 M Na2SO4, 0.65 M K2SO4, and 1.0 M MgSO4; electrochemical performance of the freestanding Ti3C2Tx-TMAOH film electrode including CV curves, specific capacitance vs scan rate, GCD curves, and EIS spectra in 1.0 M Na2SO4, 0.65 M K2SO4, and 1.0 M MgSO4 (PDF)This article has not yet been cited by other publications.

Simplified Synthesis of Fluoride-Free Ti 3 C 2 T x via Electrochemical Etching toward High-Performance Electrochemical Capacitors

Free-standing Ti<sub>3</sub>C<sub>2</sub>T<sub>x</sub> MXene film as binder-free electrode in capacitive deionization with an ultrahigh desalination capacity

Synthesis of fluorine free MXene through lewis acidic etching for application as electrode of proton supercapacitors

The fabrication of Ti3C2 and Ti3CN MXenes by electrochemical etching

Achieving Quick Charge/discharge Rate of 3.0 V S−1 by 2D Titanium Carbide (mxene) Via N-doped Carbon Intercalation

Fluorine-Free Synthesis of High-Purity Ti3C2Tx (T=OH, O) Via Alkali Treatment

Fluorine-Free Synthesis of High-Purity Ti3 C2 Tx (T=OH, O) via Alkali Treatment

Green Synthesis of Fluorine-Free MXene Via Hydrothermal Process: A Sustainable Approach for Proton Supercapacitor Electrodes

ZnF2-enabled Preparation of Ti3C2Tx Towards High-Performance Zinc-Ion Hybrid Capacitors

Amine-Assisted Delaminated 2D Ti 3 C 2 T x MXenes for High Specific Capacitance in Neutral Aqueous Electrolytes

Synthesis of Fluorine-Free Ti3C2Tx MXenes Via Acidic Activation for Enhanced Electrochemical Applications

Single‐Step Synthesis of Exfoliated Ti3C2Tx MXene through NaBF4/HCl Etching as Electrode Material for Asymmetric Supercapacitor

A Facile Etching Route for Preparing Ti 3 C 2 MXene with Enhanced Electrochemical Performance in Silver Nitrate Solution

Synthesis of Ti3C2Fx MXene with controllable fluorination by electrochemical etching for lithium-ion batteries applications

Fluoride‐Free Synthesis of 2D Titanium Carbide (MXenes) Assisted by scCO2‐Based Ternary Solution

In situ Modified Mesoporous MXene Film with Excellent Oxidation Resistance for High-Performance Supercapacitor

Fluoride‐Free Synthesis of Two‐Dimensional Titanium Carbide (MXene) Using A Binary Aqueous System

Controllable Etching of Ti3SiC2 to Produce Fluorine‐Enriched, Hydrophobic 2D Titanium Carbide for Ultrastable Zinc Ion Batteries

New Ti3-yNbyC2Tx MXenes As High-Rate and Ultra-Stable Electrode Materials for Supercapacitors

Ti3−yNbyC2T MXenes as high-rate and ultra-stable electrode materials for supercapacitors

Flexible Electrode Based on Multi-Scaled MXene (ti3c2tx) for Supercapacitors