Abstract:The diluted layer‐by‐layer (N‐LBL) strategy is employed to fabricate all‐polymer solar cells (all‐PSCs). Such film‐forming strategy combined the advantage of traditional bulk‐heterojunction and LBL methods, and thus exhibited suitable donor–acceptor interfaces and optimal photon utilization behaviors. Consequently, a high short‐circuit current density over 26 mA cm−2 and promising power conversion efficiencies of 18.33% are realized for N‐LBL prepared all‐PSCs. Disordered polymer chain entanglements within all‐polymer blends limit the formation of optimal donor–acceptor phase separation, and thus the performance of all‐polymer organic solar cells (all‐PSCs). Considering the challenge and importance of morphology regulation in all‐PSCs, a diluted layer‐by‐layer (N‐LBL) strategy is thereby adopted to fine‐tuning the properties of all‐polymer blends. When comparing the traditional PM6:PY‐IT based bulk‐heterojunction (BHJ) film and PM6/PY‐IT layer‐by‐layer (LBL) film, the N‐LBL film, which is prepared from diluted PM6 (with 3% PY‐IT) bottom layer and diluted PY‐IT (with 6% PM6) top layer, displayed a clearer bi‐continuous fibrillar network and a higher exciton generation process. Benefiting from these unique characters, the all‐PSC consisting the N‐LBL active layer exhibited a short‐circuit current density over 26 mA cm−2 and a power conversion efficiency (PCE) of 18.33%, which are both higher than those of BHJ (16.88%) and LBL (17.13%) devices. Moreover, the universality of the dilution strategy in other all‐polymer blends (PM6 and PY‐DT, PM6 and PY‐FT‐o) is also demonstrated with unanimously improved device performance. This work underscores the effectiveness of the diluted layer‐by‐layer method in tuning the morphologies and charge dynamics for high‐performance all‐PSCs.

Eco-Friendly Solvent-Processed Layer-by-Layer Ternary All-Polymer Solar Cells Exhibiting over 18.5% Efficiency

Layer‐by‐Layer‐Processed Ternary All‐polymer Organic Solar Cells with 17.74% Efficiency Enabled by introducing a designed narrow‐bandgap guest polymer acceptor

Ternary All‐Polymer Solar Cells with Efficiency up to 18.14% Employing a Two‐Step Sequential Deposition

Over 18% efficiency ternary all-polymer solar cells with high photocurrent and fill factor

Layer-by-layer processed binary all-polymer solar cells with efficiency over 16% enabled by finely optimized morphology

Achieving 15.81% and 15.29% Efficiency of All-Polymer Solar Cells Based on Layer-by-layer and Bulk Heterojunction Structures

Layer‐by‐Layer All‐Polymer Solar Cells Approaching 19% with Dual‐Donor Modulation of an Interpenetrating Network

Effective Regulation of Morphologies and Exciton‐Generation Process Enables Quasi‐Planar All‐Polymer Organic Solar Cells Exceed 18% Efficiency

Ternary Polymer Solar Cells with Alloyed Donor Achieving 14.13% Efficiency and 78.4% Fill Factor

Over 19.1% efficiency for sequentially spin-coated polymer solar cells by employing ternary strategy

16% efficiency all-polymer organic solar cells enabled by a finely tuned morphology via the design of ternary blend

Achieving high efficiency and well-kept ductility in ternary all-polymer organic photovoltaic blends thanks to two well miscible donors

Improved Molecular Ordering in a Ternary Blend Enables All‐Polymer Solar Cells over 18% Efficiency

Efficient All-Polymer Solar Cells Based on a New Polymer Acceptor Achieving 10.3% Power Conversion Efficiency

High Efficiency Layer‐by‐Layer All‐Polymer Solar Cell Enabled by Bottom‐Layer Optimization

Efficient Non-Halogenated Solvent Processed Ternary All-Polymer Solar Cells with A Favorable Morphology Enabled by Two Well-Compatible Donors.

All‐Polymer Solar Cells with 17% Efficiency Enabled by the "End‐Capped" Ternary Strategy

Over 16% efficiency all-polymer solar cells by sequential deposition

Achieving over 17% efficiency of ternary all-polymer solar cells with two well-compatible polymer acceptors

Green‐Solvent‐Processed 17% Efficient Polymer Solar Cell Achieved Synergistically by Aligning Energy Levels and Improving Morphology with the Quaternary Strategy

An Improved Performance of All Polymer Solar Cells enabled by Sequential Processing via Non-halogenated Solvents