Abstract:ConspectusCarbon dioxide emissions from consumption of fossil fuels have caused serious climate issues. Rapid deployment of new energies makes renewable energy driven CO2 electroreduction to chemical feedstocks and carbon-neutral fuels a feasible and cost-effective pathway for achieving net-zero emission. With the urgency of the net-zero goal, we initiated our research on CO2 electrolysis with emphasis on industrial relevance.The CO2 molecules are thermodynamically stable due to high activation energy of the two C═O bonds, and efficient electrocatalysts are required to overcome the sluggish dynamics and competitive hydrogen evolution reaction. The CO2 electrocatalysts that we have explored include molecular catalysts and nanostructured catalysts. Molecular catalysts are centered on earth abundant elements such as Fe and Co for catalyzing CO2 reduction, and using Fe catalysts, we proposed an amidation strategy for reduction of CO2 to methanol, bypassing the inactive formate pathway. For nanostructured catalysts, we developed a carbon enrichment strategy using nitrogen-rich nanomaterials for selective CO2 reduction.Direct CO2 electroreduction from the flue gas stream represents the "holy grail" in the field, because typical CO2 concentration in flue gas is only 6-15%, posing a significant challenge for CO2 electrolysis. On the other hand, direct electroreduction of CO2 in the flue gas eliminates the carbon capture process and simplifies the overall carbon capture and utilization (CCU) scheme. However, direct flue gas reduction is frustrated by the reactive oxygen (5-8%), low CO2 concentration (6-15%), and potentially toxic impurities. Surface CO2 enrichment catalysts with high O2 tolerance could be viable for achieving direct CO2 electroreduction for decarbonization of flue gas.In addition to the electrocatalysts, the incorporation of catalysts into the electrolyzer and development of a suitable process was also investigated to meet industrial demands. A membrane electrode assembly (MEA) is a zero-gap configuration with cathode and anode catalysts coated on either side of an ion exchange membrane. We adopted the MEA configuration due to the structural simplicity, low ohmic resistance, and high efficiency. The electrode factors (for example, membrane type, catalyst layer porosity, and MEA fabrication method) and the electrolyzer factors (for example, flow channels, gas diffusion layer) are critical to highly efficient operation. We separately developed an anion-exchange membrane-based system for CO production and cation-exchange membrane-based system for formate production. The optimized electrolyzer configuration can generate uniform current and voltage distribution in a large-area electrolyzer and operate using an industrial CO2 stream. The optimized process was developed with the targets of long-term continuous operation and no electrolyte consumption.

Efficient Electrolysis of CO2 Capture Solution to Syngas over Ni‐N‐C Catalyst

Synthesis of Composition-Tunable Syngas from Efficiently Electrochemical Conversion of CO2 over AuCu/CNT Bimetallic Catalyst

Electrochemical Conversion of CO <sub>2</sub> to Syngas with Controllable CO/H <sub>2</sub> Ratios over Co and Ni Single‐Atom Catalysts

Electrochemical Conversion of CO2 to Syngas with Controllable CO/H2 Ratios over Co and Ni Single-Atom Catalysts.

Electrochemical Conversion of CO<sub>2</sub> to Syngas with Controllable CO/H<sub>2</sub> Ratios over Co and Ni Single-Atom Catalysts

Fe-Ni bimetallic composite N-doped carbon catalyst for electrocatalytic reduction of CO 2 to produce efficient and controlled syngas

Synthesis of Tunable Syngas on Cobalt‐Based Catalysts Towards Carbon Dioxide Reduction

Tunable Syngas Formation at Industrially Relevant Current Densities via CO2 Electroreduction and Hydrogen Evolution over Ni and Fe‐derived Catalysts obtained via One‐Step Pyrolysis of Polybenzoxazine Based Composites

Engineering the NiNC Catalyst Microenvironment Enabling CO2 Electroreduction with Nearly 100% CO Selectivity in Acid

3D Cu/In Nanocones by Morphological and Interface Engineering Design in Achieving a High Current Density for Electroreduction of CO2 to Syngas under Elevated Pressure

A cascade of in situ conversion of bicarbonate to CO2 and CO2 electroreduction in a flow cell with a Ni-N-S catalyst

Nanoparticle-Assisted Ni–Co Binary Single-Atom Catalysts Supported on Carbon Nanotubes for Efficient Electroreduction of CO2 to Syngas with Controllable CO/H2 Ratios

Electrochemical conversion of CO2 to syngas with a wide range of CO/H2 ratio over Ni/Fe binary single-atom catalysts

Nanoparticle-Assisted Ni–Co Binary Single-Atom Catalysts Supported on Carbon Nanotubes for Efficient Electroreduction of CO 2 to Syngas with Controllable CO/H 2 Ratios

Achieving Efficient CO2 Electrolysis to CO by Local Coordination Manipulation of Nickel Single-Atom Catalysts.

Syngas Production from Electrocatalytic CO2 Reduction with High Energetic Efficiency and Current Density

Efficient CO2 Electroreduction over Silver Hollow Fiber Electrode

Direct CO2 Electroreduction from Carbonate

CO<sub>2</sub> Electroreduction on Mono- and Bi-Metallic M-N-C Catalysts

CO 2 Electrolysis System under Industrially Relevant Conditions

Anionic Ionomer: Released Surface-Immobilized Cations and an Established Hydrophobic Microenvironment for Efficient and Durable CO2-to-Ethylene Electrosynthesis at High Current over One Month