Abstract:Tungsten-rhenium (W-Re) alloys have excellent high-temperature properties due to the solution strengthening of Re. However, the best strengthening position of Re in W-Re alloy at high temperature is not clear. Therefore, the effects of Re on the high-temperature properties of nano-polycrystalline W-Re film were carried out by using molecular dynamics (MD) simulation and density functional theory (DFT). Our calculated results show that Re atoms at all doping positions can increase the strength and plasticity of the W matrix, the yield strength increased from 18.81 GPa to a maximum of 22.14 GPa, and the yield strain increased from 4.06% to a maximum of 5.46%, because the deformation of the GBAZ increased, resulting in higher plastic hardening and Re changes the directionality of valence electron transfer of W atoms. Among all enhancement sites, the grain boundary affected zone (GBAZ) solid solution (Re atoms distribute in the GBAZ, and there is no Re atom in the grain interior) has the best effect on the yield strength, but based on such model when Re atoms' amount in the grain interior (GI) increased, the yield strength decreased, and the yield strain slightly improved. It is because a contraction force toward the GI is generated when Re dissolves in it, which weakens the strengthening effect of GBAZ solid solution on GBs. In contrast, the GB strengthening energy increases while the bond length at the GBs decreases when more Re atoms dissolve in the GBAZ. Furthermore, the voids in GBs are significantly reduced, and more voids can be held in GBs during the tensile process. The study is helpful to understand the strengthening mechanism of W-Re alloys.

Co-sintering Characteristics of W-Re Pre-Alloyed Powder and Ni, Fe

Influences of Ni/Cu/Cr3C2 Composite Additive on Microstructure and Properties of WC–10Co Fine Grained Hardmetal

The Effects of Refractory Elements on Mechanical Properties in CoCrNiFe Concentrated Solid Solution Alloys Across Different Temperatures

Preparation, Mechanical Properties and Strengthening Mechanism of W-Re Alloys: A Review

Resolving the Sintering Conundrum of High-Rhenium Tungsten Alloys

The preparation process of ultrafine gain W-Re powder by wet chemical method and its effect on alloy properties

Strengthening effect of rhenium on different substitution positions of tungsten nanofilm at high temperature: DFT and molecular dynamics simulation

Mechanical Properties and Thermal Stability of W-ZrC/HfC-Re Alloys Fabricated by Spark Plasma Sintering

Effects of minor rhenium additions on the thermal properties and recrystallization temperature of tungsten alloy

Reduction, Sintering and Mechanical Properties of Rhenium-Tungsten Compounds

Effect of Re addition on the microstructure and mechanical properties of AlCoCrFeNi 2.1 eutectic high-entropy alloy

Fabrication and Characterization of Tungsten Heavy Alloys with High W Content by Powder Metallurgy

Effect of Re Addition on Microstructure and Mechanical Properties of Nb-Si-Ti-Al-Cr-Hf Ultrahigh Temperature Alloys

Comparative study on microstructure and performance of sintered, forged and annealed W-3Re-HfC composites

Solid-solution Hardening of WC by Rhenium

Unveiling the Intrinsic Rhenium Effect in Tungsten

Preparation and Properties of W(al) Alloy Powders

Effect of Re and W upon brittle fracture in Ni3Al cracks by atomic simulation

Site preference and effect on shear deformation of co-alloying elements addition to γ′-Ni3Al phase in Ni-based single crystal superalloys

Influence of Re addition amount on structure, mechanical, oxidation as well as corrosion behaviors of WC-15Co cemented carbide

Improving mechanical properties of W-Ni 3 Al alloy through Zr element addition: Solid-solution and oxide particle strengthening