Abstract:All-inorganic CsPbBr3 perovskite solar cells (PSCs) have attracted more attentions due to the excellent environmental stability, however, the wide bandgap and relatively poor crystallinity of CsPbBr3 have been the main obstacle to improve their power conversion efficiency (PCE). Herein, we proposed an efficient and simple strategy of precursor additive in the two-step aqueous-solution method, the resulted CsPbBr3 film has achieved more uniform grain size, almost pure perovskite phase, smoother surface, less defects, enhanced light absorption and longer carrier lifetime. This is due to the rapid evaporation of additive (IPA and CH3OH) in the CsBr/H2O precursor leads to a relatively higher local CsBr concentration on the surface of PbBr2, which can provide more nucleation sites and accelerate the crystallization of perovskite. Further, when utilizing the optimal additive of 5% (in volume) IPA, the HTM-free carbon-based CsPbBr3 PSCs obtained a PCE improvement from 9.09% to 10.29%, and an ultrahigh fill factor (FF) of 85.21%. What is more, by adding 0.1 mol/L PbCl2 into the PbBr2 solution in the first step, the open circuit voltage of device has increased from 1.36 V to 1.48 V, the champion PCE reached 10.37% (steady output PCE of 10.17%), and the non-encapsulated device could maintain 85% of its initial efficiency after 50 d in the air. This work provides a cost-effective approach to grow CsPbBr3 film and boosts the efficiency benchmark of the CsPbBr3 PSCs to more than 10%, it is desirable that the highly efficient and stable CsPbBr3 PSCs can be developed in future.

Enhancing the Performance of Perovskite Solar Cells Through Cesium Halide Doping

Enhanced Crystallization and Optimized Morphology of Perovskite through Doping Indium-Based Metal-Organic Assembly: Achieving Significant Solar Cell Efficiency Enhancements

Enhancing efficiency and stability of perovskite solar cells through two-step deposition method with the addition of cesium halides to PbI2 precursor

Enhancing perovskite solar cells efficiency through cesium fluoride mediated surface lead iodide modulation

Efficient Perovskite Solar Cells Fabricated Through CsCl-Enhanced PbI2 Precursor Via Sequential Deposition.

Improved Photovoltaic Performance of CsPbI2Br Perovskite Films Via Bivalent Metal Chloride Doping

Efficient Two-Step Sequential Deposition Perovskite Solar Cells Via Pbcl2 Enhanced Pbi2 Precursor

Ultrahigh Fill-Factor All-Inorganic CsPbBr3 Perovskite Solar Cells Processed from Two-Step Solution Method and Solvent Additive Strategy

A multi-functional halogen-free cesium salt bulk-doping treatment toward performance-enhancement of perovskite solar cells

Cs4PbI6-Cl Nucleation Seeds Assisted Highly-Oriented Inorganic CsPbI3 Perovskites for Efficient Perovskite Solar Cells

Compositional Engineering of Chloride Ion‐Doped CsPbBr3 Halides for Highly Efficient and Stable All‐Inorganic Perovskite Solar Cells

Dual Strategy Based on Quantum Dot Doping and Phenylethylamine Iodide Surface Modification for High-Performance and Stable Perovskite Solar Cells

Synergistic Benefits of Cesium‐Doped Aqueous Precursor in Air‐Processed Inverted Perovskite Solar Cells

Advances in cesium lead iodide perovskite solar cells: Processing science matters

Over 1 Μm Electron-Hole Diffusion Lengths in CsPbI2Br for High Efficient Solar Cells

Enhancement of Photoelectric Performance for CsPbI2Br Solar Cells by the Synergistic Effect of Binary Additives

Enhanced performance of CH3NH3PbI3 perovskite solar cells by excess halide modification

Lattice Modulation of Alkali Metal Cations Doped Cs1-xRxPbBr3 Halides for Inorganic Perovskite Solar Cells

Enhancement of thermal stability for perovskite solar cells through cesium doping

Phase transition induced recrystallization and low surface potential barrier leading to 10.91%-efficient CsPbBr3 perovskite solar cells

High-performance carbon-based CsPbI2Br perovskite solar cells via small molecule modification