Abstract:Laser powder bed fusion (LPBF) uses a focused, high power laser to repeatedly scan geometric patterns on thin layers of metal powder, which build up to a final, solid three-dimensional (3D) part. This process is somewhat limited in that the parts tend to have poorer surface finish (compared to machining or grinding) and distortion due to residual stress, as well as multiple other deficiencies. Typical laser scan strategies are relatively simple and use constant laser power levels. This elicits local variations in the melt pool size, shape, or temperature, particularly near sharp geometric features or overhang structures due to the relatively higher thermal conductivity of solid metal compared to metal powder. In this paper, we present a new laser power control algorithm, which scales the laser power to a value called the geometric conductance factor (GCF). The GCF is calculated based on the amount of solid vs. powder material near the melt pool. The algorithm for calculating GCF is presented along with some basic examples for clarification. Then, we detail the hardware and software implementation on the National Institute of Standards and Technology (NIST) additive manufacturing metrology testbed (AMMT), which includes co-axial melt pool monitoring using a high-speed camera. Six parts were fabricated out of nickel superalloy 625 (IN625) with the same nominal laser power, but with varying GCF algorithm parameters. We demonstrate the effect of tailored laser power on reducing the variability of melt pool intensity measured throughout the 3D build. Finally, we contrast the difference between the 'optimized' part vs. the standard build parameters, including the deflection of the final part top surface near the overhang and the variation of surface finish on the down-facing surfaces. Ultimately, the improvements to the in-situ process monitoring and part qualities demonstrate the utility and future potential tuning and optimizing more complex laser scan strategies.

Study on Additive and Subtractive Manufacturing Using Picosecond Laser Micromachining

Study on Additive and Subtractive Manufacturing of High-Quality Surface Parts Enabled by Picosecond Laser

Study of Negative Side Wall Surface Roughness by Picosecond Photonic Impact Microdeposition

Recent progress on additive manufacturing of multi-material structures with laser powder bed fusion

Bridging additive and subtractive manufacturing

In-Situ Characterization of Pore Formation Dynamics in Pulsed Wave Laser Powder Bed Fusion

Recent progress and scientific challenges in multi-material additive manufacturing via laser-based powder bed fusion

Dynamics of pore formation during laser powder bed fusion additive manufacturing

In Situ Characterization of Laser Powder Bed Fusion Using High-Speed Synchrotron X-ray Imaging Technique

Ultrafast X-ray Imaging of Laser–metal Additive Manufacturing Processes

A Review on Ultrafast-Laser Power Bed Fusion Technology

Part geometry and conduction-based laser power control for powder bed fusion additive manufacturing

Recent Advancements in Post Processing of Additively Manufactured Metals Using Laser Polishing

Microstructure tailoring in laser powder bed fusion (L-PBF): Strategies, challenges, and future outlooks

Investigation of Laser-Powder Interaction in Laser Powder Bed Fusion Process in Additive Manufacturing

Dual-beam Laser-Matter Interaction at Overlap Region During Multi-Laser Powder Bed Fusion Manufacturing

Revealing transient powder-gas interaction in laser powder bed fusion process through multi-physics modeling and high-speed synchrotron x-ray imaging

Improved Productivity with Multilaser Rotary Powder Bed Fusion Additive Manufacturing

In-situ High-Speed X-ray Imaging of Piezo-Driven Directed Energy Deposition Additive Manufacturing

Ultrafast Laser Additive Manufacturing: A Review

Additive and Subtractive 3D-Microfabrication of Micro/nanostructures