Abstract:This manuscript reports an approach for additive manufacturing of complex functionally‐graded metallic components via laser powder bed fusion, where the composition and volume fractions of the phases are locally tuned via spatial modulation of the processing parameters. Hybrid structures made of 17‐4PH steel, with local variations of ~20% in strength and ~150% in ductility are demonstrated. The established approach to materials design for additive manufacturing (AM) consists of attempting to reproduce the uniform structures and properties of conventionally processed materials. While this certainly helped facilitate material certification and the rapid introduction of AM technologies in several industries, the opportunity to exploit unique features of specific AM processes to generate spatially varying microstructures–and hence novel materials, remains largely untapped. This work presents a method for manufacturing materials through laser powder bed fusion (LPBF), in which control over the spatial variation in phase composition and mechanical properties is achieved. This technique is demonstrated using 17‐4 precipitation‐hardened stainless steel (17‐4PH), by controlling spatial modulation of energy densities during printing. This results in local control of ferrite/martensite volume fractions, allowing the fabrication of metal/metal architected composites with hard/brittle regions interspersed with soft/tough regions. Local variations of ~20% in tensile strength and ~150% in elongation are achieved, with a spatial resolution of ~100 microns. The approach is general and robust, fully compatible with commercially available LPBF equipment, and applicable to virtually any multi‐phase alloy system. This work shifts the paradigm from attempting to print components with uniform properties to manufacturing alloys with controlled spatial property gradients.

Recent progress on additive manufacturing of multi-material structures with laser powder bed fusion

Recent progress and scientific challenges in multi-material additive manufacturing via laser-based powder bed fusion

A critical review of biomimetic structures via laser powder bed fusion: Toward multi-functional application

Laser powder bed fusion for metal additive manufacturing: perspectives on recent developments

Additive Manufacturing of Multi-Materials with Interfacial Component Gradient by In-Situ Powder Mixing and Laser Powder Bed Fusion

Recent progress of aluminum alloys and aluminum matrix composites produced via laser powder bed fusion: a review

Evaluation of material extrusion and laser-assisted in situ consolidation integrated additive manufacturing for multi-material components

Laser Powder Bed Fusion: A State-of-the-Art Review of the Technology, Materials, Properties & Defects, and Numerical Modelling

Laser Powder Bed Fusion of Powder Material: A Review

Microstructure tailoring in laser powder bed fusion (L-PBF): Strategies, challenges, and future outlooks

Laser Fusion of Powder and Foil – a Multi Material Approach to Additive Manufacturing

Laser Powder Bed Fusion of Dissimilar Metal Materials: A Review

Microstructural Control of a Multi‐Phase PH Steel Printed with Laser Powder Bed Fusion

Recent Advancements in Hybrid Additive Manufacturing of Similar and Dissimilar Metals via Laser Powder Bed Fusion

A review of the multi-dimensional application of machine learning to improve the integrated intelligence of laser powder bed fusion

Recent progress on the control strategies of microstructure and mechanical properties of LPBF-printed aluminum alloys

Laser powder bed fusion of 316L stainless steel and K220 copper multi-material

Advances in Laser Powder Bed Fusion of Tungsten, Tungsten Alloys, and Tungsten-Based Composites

Characterization, preparation, and reuse of metallic powders for laser powder bed fusion: A review

Research Status of Laser Powder Bed Fusion Al–Li Alloys and Its Improvement Measures