Abstract:Additive manufacturing of Duplex Stainless Steels (DSS) and Super Duplex Stainless Steels (SDSS) has been successfully demonstrated using LPBF in recent years, however, both alloys feature an almost fully ferritic microstructure in the as-built condition due to the fast cooling rates associated with the Laser Powder Bed Fusion (LPBF) process. Blends of DSS and SDSS powders were formulated with austenitic stainless-steel 316L powder, aiming to achieve increased austenite formation during in the LPBF as-built condition to potentially minimize the post heat treatments (solution annealing and quenching). Powder characteristics were investigated and process parameters were optimized to produce near fully dense parts. Nanoindentation (NI) tests were conducted to measure, not only the local mechanical properties and correlate them with the as-built microstructure, but also to gain a deeper understanding in the deformation behavior of individual phases that cannot be studied directly by macroscopic tensile tests. Scanning Electron Microscopy (SEM) and Electron Backscatter Diffraction (EBSD) were employed for microstructural analysis and phase quantification. The microstructural analysis and EBSD phase maps revealed an increase in austenite in the as-built microstructures. Blend 1 resulted in a duplex microstructure consisting of 10% austenite at the XY plane and 20% austenite at the XZ plane. The austenite content increased with increasing proportion of 316L stainless steel in the powder blends. The DSS blend required a much higher volumetric energy density for the fabrication of near fully dense parts. This imposed a slower solidification and a higher melt pool homogeneity, allowing for adequate diffusion of the austenite stabilizing elements. The presented workflow and findings from this study provide valuable insights into powder mixing for the development of custom alloys for rapid material screening in LPBF.

Microstructural Control of a Multi‐Phase PH Steel Printed with Laser Powder Bed Fusion

The interplay of local chemistry and plasticity in controlling microstructure formation during laser powder bed fusion of metals

Processing-microstructure relationships in ferrous alloys via mixed powder laser powder bed fusion

Additive manufacturing of alloys with programmable microstructure and properties

Microstructural control in metal laser powder bed fusion additive manufacturing using laser beam shaping strategy

Local Control of Microstructure and Mechanical Properties of High-strength Steel in Electric Arc-based Additive Manufacturing

Approach to Estimate the Phase Formation and the Mechanical Properties of Alloys Processed by Laser Powder Bed Fusion via Casting

Laser Fusion of Powder and Foil – a Multi Material Approach to Additive Manufacturing

Additive Manufacturing of 17-4PH Alloy: Tailoring the Printing Orientation for Enhanced Aerospace Application Performance

Evolution of microstructure and mechanical properties in 2205 duplex stainless steels during additive manufacturing and heat treatment

Novel Powder Feedstock towards Microstructure Engineering in Laser Powder Bed Fusion: A Case Study on Duplex/Super Duplex and Austenitic Stainless-Steel Alloys

Heterogeneous structure architected by additive manufacturing: facile route towards strong and ductile steel

Recent progress on additive manufacturing of multi-material structures with laser powder bed fusion

Microstructure tailoring in laser powder bed fusion (L-PBF): Strategies, challenges, and future outlooks

Effect of Scan Pattern on the Microstructure and Mechanical Properties of Powder Bed Fusion Additive Manufactured 17-4 Stainless Steel

Novel Approach to Grain Boundary Modification in Stainless and Duplex Steel L-PBF Components through In Situ Heat Treatment

Thermo-physical phase field model of laser powder melting additive manufacturing of 2D layered stainless steel structures

Layer-level fabrication of continuous functionally graded materials (cFGMs) via Powder Bed Fusion – Laser Beam technology

Additive Manufacturing of Horizontal and 3D Functionally Graded 316L/Cu10Sn Components via Multiple Material Selective Laser Melting

An ultra-high strength martensitic steel fabricated using selective laser melting additive manufacturing: Densification, microstructure, and mechanical properties

Additive Manufacturing of SS316L/IN718 Bimetallic Structure via Laser Powder Bed Fusion