Abstract:From the stripping points, the high intensity proton beam of a compact cyclotron travels through the fringe field area of the machine to the combination magnet. Starting from there the beams with various energy is transferred to the switching magnet for distribution to the beam line targets. In the design of the extraction and transport system for the compact proton cyclotron facilities, such as the 70MeV in France and the 100MeV in China, the space charge effect as the beam crosses the fringe field has not been previously considered; neither has the impact on transverse beam envelope coupled from the longitudinal direction. Those have been concerned much more with the higher beam-power because of the beam loss problem. In this paper, based on the mapping data of 70MeV cyclotron including the fringe field by BEST Cyclotron Inc (BEST) and combination magnet field by China Institute of Atomic Energy (CIAE), the beam extraction and transport are investigated for the 70MeV cyclotron used on the SPES project at Istituto Nazionale di Fisica Nucleare, Laboratori Nazionali di Legnaro (INFN–LNL). The study includes the space charge effect and longitudinal and transverse coupling mentioned above, as well as the matching of beam optics using the beam line for medical isotope production as an example. In addition, the designs of the ±45° switching magnets and the 60° bending magnet for the extracted beam with the energy from 35MeV to 70MeV have been made. Parts of the construction and field measurements of those magnets have been done as well. The current result shows that, the design considers the complexity of the compact cyclotron extraction area and fits the requirements of the extraction and transport for high intensity proton beam, especially at mA intensity levels.

Study on XiPAF-Upgrading Synchrotron Beam Loss

Optimization of Low-Energy Slow Extraction Efficiency of XiPAF

Multiturn Injection Design and Optimization for XiPAF-Upgrading Synchrotron

Research on Longitudinal Dynamics and Design of RF Parameters of Synchrotron for XiPAF-upgrading Project

Closed-orbit Distortion Study of XiPAF Upgrading Project Synchrotron

Investigation and Improvement of Spill Quality at XiPAF Synchrotron

Optimization of Proton Beam Quality by Obliquely Incident Laser Pre-Pulse

High Intensity Proton Beam Transportation Through Fringe Field of 70 MeV Compact Cyclotron to Beam Line Targets

Beam Instrumentation System Optimization for Top-up Operation in SSRF

Design and Test of an RF Acceleration System Loaded with Magnetic Alloy for the Proton Synchrotron of the Xi’an Proton Application Facility

Construction and Beam Commissioning of a Compact Proton Synchrotron for Space Radiation Environment Simulation

Synchrotron Injection and Acceleration Commissioning of Xi'an 200 MeV Proton Application Facility

Beam dynamics design and irradiation experiment of beam loss for a CW 100-mA proton RFQ

Two Fast Multiturn Injection Models for Synchrotron Injection Efficiency Optimization

Fair Synchrotron Operation with Low Charge State Heavy Ions

Focal Spot Effects on the Generation of Proton Beams During Target Normal Sheath Acceleration

The Radiation Measurement Applied to Beam Lifetime Study on the Synchrotron Radiation Facilities

THE 230 MeV PROTON ACCELERATOR FOR XI ’ AN PROTON APPLICATION FACILITY

A 60 MeV ultra-compact proton accelerator for proton radiation effects in China

Beam quality improvement in the later stage of radiation pressure acceleration

Beam losses due to the foil scattering for CSNS/RCS