Abstract:A novel design of the 532 nm Rayleigh–Mie Doppler lidar receiving system is carried out. The use of polarization isolation technology to effectively improve the receiving system optical reception efficiency, suppress the background noise, not only improves the system wind field detection accuracy, while achieving a high-accuracy temperature measurement. The wind speed and temperature measurement principle of the system are discussed in detail, and the triple Fabry–Perot etalon parameters are optimized. Utilizing the overall design parameters of the system, the system detection performance is simulated. The simulation results show that from 5 to 50 km altitude with vertical resolution of 0.1 km@5 ∼ 20 km, 0.5 km@20 ∼ 40 km, 1 km@40 ∼ 50 km, by using the laser with single pulse energy of 600 mJ, repetition frequency of 50 Hz and the receiving telescope with aperture of 0.8 m, with 2min integration time and in ± 50 m/s radial wind speed range, the radial wind speed measurement accuracies of our designed lidar in the day and night are better than 2.6 m/s and 0.9 m/s respectively, and its performance is obviously superior to that of traditional system 5.6 m/s and 1.4 m/s wind speed accuracies; with 10min integration time and in 210 ∼ 280 K temperature range, the temperature measurement accuracies of the system in the day and night are better than 3.4 K and 1.2 K respectively; since the wind speed sensitivities of the Mie and Rayleigh scattering signals are not exactly the same, in ± 50 m/s radial wind speed range, the wind speed bias induced by Mie signal is less than 1 m/s in the temperature range of 210–290 K and in the backscatter ratio range of 1–1.5 for pair measurement.

Demonstration on the Performance Enhancement of the 1.645 Μm Coherent Doppler Lidar for Long-Range Wind Measurements with Modification of Laser Transmitter and Optical Antenna

1.55Μm All-Fiber Coherent Doppler Lidar for Wind Measurement

1.55-Μm Pulse Coherent LIDAR with 10-Km Detection Range

A Novel Wind Ladar System Based on 1.55μm All-Fiber Coherent Doppler Laser

A novel wind ladar system based on 1.55 mu m All-fiber Coherent

Numerical Simulation of 1.55 um Coherent Lidar for Wind Measurement

Research on optimizing the optical local-oscillator power of Coherent Doppler LiDAR to enhance wind velocity measurements

Performance of Continuous-wave Coherent Doppler Lidar for Wind Measurement

Research on the Performance of an Active Rotating Tropospheric and Stratospheric Doppler Wind Lidar Transmitter and Receiver

Multi-Longitudinal-Mode High-Spectral-Resolution Lidar

Design and performance simulation of 532 nm Rayleigh–Mie Doppler lidar system for 5–50 km wind measurement

Theoretical performance of a 1.5-μm satellite-borne coherent Doppler wind lidar using a planar waveguide optical amplifier with a demonstrated figure of merit: simulation of signal detection probability, measurement precision, and bias

Fabry-Perot interferometer based Mie Doppler lidar for low tropospheric wind observation

Demonstration and optimization of coherent Doppler wind LiDAR with low sampling resolution

Performance assessment of a coherent DIAL-Doppler fiber lidar at 1645 nm for remote sensing of methane and wind

Doppler Wind Lidar Based on Fabry-Perot Etalon

Coherent Doppler wind lidar signal denoising adopting variational mode decomposition based on honey badger algorithm

Doppler Wind Lidar From UV to NIR: A Review With Case Study Examples

All-fiber Upconversion High Spectral Resolution Wind Lidar Using a Fabry-Perot Interferometer

Wind velocity retrieval and field widening techniques of fringe-imaging Mach-Zehnder interferometer for Doppler lidar

Mobile Rayleigh Doppler lidar for wind and temperature measurements in the stratosphere and lower mesosphere