Abstract:As the tailings of complex paigeite ore through the multistep magnetic separation process, the boron-bearing iron concentrate is mainly used in the ironmaking process for the recovery of iron, while the boron is hard to be recovered. In this study, a novel method was proposed for efficient recovery of boron from boron-bearing iron concentrate through mineral phase transformation and low-temperature separation via super-gravity. The mineral phase transformation of boron-bearing iron concentrate in the reduction process as a function of the temperature mainly included three stages, Stage I: The iron minerals were fully reduced to metallic iron at 1373–1423 K, Stage II: The boron was mainly transformed from suanite (Mg2B2O5) into the boron-rich slag with a high concentration at 1473–1523 K, Stage III: The forsterite (Mg2SiO4) was further melted into slag and some boron was also reduced and entered into liquid iron which caused a significant decrease in boron concentration in the slag at 1573–1623 K. Thus, low-temperature separation of boron-rich slag from the iron phase was conducted at 1523 K via super-gravity. The boron was efficiently recovered into the boron-rich slag with a high recovery of 98.24 % and a high mass fraction of B2O3 of 39.27 wt%, and almost all boron was enriched into a form of suanite. Low-temperature separation greatly improves the recovery of boron in boron-rich slag and prevents boron from entering metallic iron, and also improves the activity of boron-rich slag for sustainable utilization.

Borax Preparation from Na-B-Si-containing Solution by Carbonation and Multi-Step Crystallization

New Process for Synthesis of Sodium Borohydride

An integrated and efficient process for borax preparation and magnetite recovery from soda-ash roasted ludwigite ore under CO–CO2–N2 atmosphere

Extraction Of Boron From Ludwigite Ore: Mechanism Of Soda-Ash Roasting Of Lizardite And Szaibelyite

Kinetics study on the low-temperature soda roasting of boron-rich blast furnace slag

Water Leaching of Boron from Soda-Ash-activated Ludwigite Ore

Co-Conversion Mechanisms of Boron and Iron Components of Ludwigite Ore During Reductive Soda-Ash Roasting

Mechanism of Boron Removal Using Calcium Silicate Slag Containing CaCl2 under O2 Atmosphere

New process for producing soda ash from brine by salting-out method

The Effect of Boron Forms on the Crystallization Process of Lithium Carbonate

Preparation of sodium borohydride by the reaction of MgH2 with dehydrated borax through ball milling at room temperature

Synthesis of Magnesium Borate Nanorods by Sol-Gel Process

Research of boron removal from polysilicon using CaO-Al2O 3-SiO2-CaF2 slags

Purification of amorphous boron powder by using the soluble transformation of acid-insoluble boron magnesium compounds

Recycling Excessive Alkali from Reductive Soda Ash Roasted Ludwigite Ore: Toward a Zero-Waste Approach

A novel method for efficient recovery of boron from boron-bearing iron concentrate: Mineral phase transformation and low-temperature separation via super-gravity

Effect of Borax Content on Composition and Microstructure of Boride Layer by Electrodeposition

Boron Removal from Industrial Silicon by Combined Slagging and Acid Leaching Treatment Technology

A Novel Process for Highly Efficient Separation of Boron and Iron from Ludwigite Ore Based on Low-Temperature Microwave Roasting

Separation Technique for Boron and Magnesium from Salt Lake Brine and Preparation of High-Purity Magnesium Oxide

Preparation of precipitated silica from desilicated solution of high-alumina fly ash by dissolution with alkali: experiment and principle of polymerization of silicic acid