Abstract:This article is focused on the experimental study of flexural properties in different multi-layer carbon fiber-reinforced polymer (CFRP) composites and correlations with the results of finite element method (FEM) simulations of mechanical properties. The comparison of the results shows the possibility of reducing the number of experimental specimens for testing. The experimental study of flexural properties for four types of carbon fiber-reinforced polymer matrix composites with twill weaves (2 × 2) was carried out. As input materials, pre-impregnated carbon laminate GG 204 T and GG 630 T (prepreg) and two types of carbon fiber fabrics (GG 285 T and GG 300 T (fabric)) were used. Multi-layer samples were manufactured from two types of prepregs and two types of fabrics, which were hand-impregnated during sample preparation. The layers were stacked using same orientation. All specimens for flexural test were cut with the longer side in the weft direction. Pre-impregnated carbon laminates were further impregnated with resin DT 121H. Carbon fabrics were hand-impregnated with epoxy matrix LG 120 and hardener HG 700. To fulfill the aim of this research, finite element method (FEM)-based simulations of mechanical properties were performed. The FEM simulations and analysis were conducted in Hexagon's MSC Marc Mentat 2022.3 and Digimat 2022.4 software. This paper presents the results of actual experimental bending tests and the results of simulations of bending tests for different composite materials (mentioned previously). We created material models for simulations based on two methods—MF (Mean Field) and FE (Finite Element), and the comparative results show better agreement with the MF model. The composites (GG 285 T and GG 300 T) showed better flexural results than composites made from pre-impregnated carbon laminates (GG 204 T and GG 630 T). The difference in results for the hand-impregnated laminates was about 15% higher than for prepregs, but this is still within an acceptable tolerance as per the reported literature. The highest percentage difference of 14.25% between the simulation and the real experiment was found for the software tool Digimat FE 2022.4 – GG 630 T composite. The lowest difference of 0.5% was found for the software tool Digimat MF 2022.4 – GG 204 T composite. By comparing the results of the software tools with the results of the experimental measurements, it was found that the Digimat MF 2022.4 tool is closer to the results of the experimental measurements than the Digimat FE 2022.4 tool.

Bending behavior of multi-layer sandwich composites reinforced with weft-knitted spacer fabrics

Effect of Polymer-Grafted Carbon Nanofibers and Nanotubes on the Interlaminar Shear Strength and Flexural Strength of Carbon Fiber/epoxy Multiscale Composites

Manufacturing and Flexural Testing of Woven Lattice Sandwich-Ply Laminate Composites

Multi‐layer structure design, fabrication and numerical simulations of 3D woven spacer fabric composites with improved mechanical properties

Experimental and theoretical results for bending and buckling of a five-layer sandwich plate reinforced by carbon nanotubes/carbon nanorods/graphene platelets/shape memory alloy based on RFSDT

Effects of stitching parameters on the flexural properties of stitched foam core sandwich composites

Mechanical Performance and Failure Analysis of a 3D-Printed "Continuous Layer–Lattice Layer–Continuous Layer" Sandwich Structure

Experimental and numerical study of specific bending behavior of tufted multilayered reinforcements and effects of tufting density

Flexural and impact response of sandwich panels with Nomex honeycomb core and hybrid fiber composite skins

Machine learning for bending behavior of sandwich beams with 3D‐printed core and natural fiber‐reinforced composite face sheets

Experimental analysis of the flexural and compressive properties of carbon fiber reinforced sandwich panels with M-shaped core

Comparison of Mechanical Property Simulations with Results of Limited Flexural Tests of Different Multi-Layer Carbon Fiber-Reinforced Polymer Composites

Mechanical Properties and Damage Mechanism of 3D Woven Spacer Composites Improved with Changing Face Layer Structures: Experimental and Numerical Study

Flexural property study of multiaxial fiber reinforced polymer sandwich panels with pultruded profile cores

Theoretical and experimental investigation of sandwich panels with 3D printed cores with GFRP composite and aluminum face sheets under 3-point bending

Mechanical properties and failure patterns of sandwich panels with AR-glass textile reinforced concrete face sheets subjected to quasi-static load

Experimental and numerical research on flexural behavior of fiber metal laminate sandwich composite structures with 3D woven hollow integrated core

Fabrication and Experimental Estimation of Mechanical Properties of Kevlar-Glass/Epoxy Interwoven Composite Laminate

Effect of Fiber Path on the Buckling Behavior of Delaminated Composites Reinforced with Woven Fabrics; Analytical and Numerical Study

Exploring deformability in 3D tufted composite reinforcements: Understanding bending behaviors in forming applications

Three-point bending tests on composite sandwich structure with balsa wood core and fiberglass faces for glider design