Abstract:Tailorability is a key advantage of fiber-reinforced composites over other material systems. While tailoring a single isolated laminate is relatively simple, challenges arise when designing larger integrated components while ensuring compatibility between laminates and avoiding sharp changes in local stiffness. The innovative Double-Double (DD) laminate design method simplifies the optimization and processing of laminates by incorporating 4-ply building blocks consisting of +φ, −φ, +ψ, and −ψ ply orientations. As a relatively new concept, DD laminate design requires careful assessment to ensure that the performance of DD laminates is equivalent to that of conventional designs. The current study compares impact damage tolerance of quadriaxial (QUAD) laminates consisting of 0°, 90°, and ±45° ply orientations with equivalent DD laminates under Low-Velocity Impact (LVI) and Compression After Impact (CAI) loadings. To this end, a validated three-dimensional high-fidelity finite element model capable of capturing fiber breakage, splitting, kinking, as well as matrix cracking and delamination, was used. A computer tool was developed to identify equivalent DD laminates and to find the best stacking sequence for achieving layup homogenization. Three equivalent DD laminates were selected for the [0/45/90/−45] 4s . The first laminate had an equal in-plane stiffness [A] matrix ([67.5/–22.5/22.5/−67.5] 8T ), the second laminate had an equal flexural stiffness [D] matrix ([64.5/−17/17/−64.5] 8T ), and the third laminate ([65.5/−18.5/18.5/−65.5] 8T ) had a similar [D] matrix while keeping the difference between each element of [A] matrices below 10 %. The results indicate that the QUAD laminates can be replaced by equivalent DD without compromising impact damage tolerance while benefiting from the improved design and manufacturing ease of the DD laminate configuration.

Effect of Fiber Path on the Buckling Behavior of Delaminated Composites Reinforced with Woven Fabrics; Analytical and Numerical Study

Influence of Fiber Cutting at the Composite Grid Intersection on the Compressive Performance of Laminate

Modeling on the Effect of Automated Fiber Placement Induced Gaps in Curved Composite Laminates

The influence of the inter-ply hybridisation on the mechanical performance of composite laminates: Experimental and numerical analysis

A Comparative Study on Interlaminar Properties of L-shaped Two-Dimensional (2D) and Three-Dimensional (3D) Woven Composites

An experimental study of weave pattern effect on the mechanical and dynamic behavior of composite laminates

The Effect of Single and Double-wefted Styles on the In-plane Impact Behavior of Fabric Carbon-aramid/Epoxy Intralayer Hybrid Composite Laminates

Effect of Sinusoidal Fiber Waviness on Non-Linear Dynamic Performance of Laminated Composite Plates with Variable Fiber Spacing

The effect of fiber bridging on mode I fatigue delamination propagation—part I: Testing

Fibre-bridged Fatigue Delamination in Multidirectional Composite Laminates

The influence of geometric imperfections on post-buckling behavior and free vibrations of a fiber-reinforced composite laminated plate under thermal loading

Effect of Crossing Warp Arrangements on Delamination Resistance of 3D Woven Composite T-joints under In-plane Tensile Loading

Uncertain buckling characteristics of thermally loaded and internally defected variable fiber spacing composite laminates

Effect of gap and overlap fiber placement defects on the delamination behavior of L-shaped composite laminates

Flexural failure properties of fiber-reinforced hybrid laminated beam subject to three-point bending

Investigation of the Tensile Performance and Failure Mechanism of Carbon–aramid Hybrid Fibers/epoxy Sandwich Structure Laminates Using the UV-thermal Synergetic Curing Mechanism: Experimentation and Simulation

Progressive failure analysis of woven and non‐woven CFRP composite/steel bolted joints

Parametric study on the load-carrying capacity of plain-woven composites hybrid bonded-bolted joints

Low-velocity impact (LVI) and compression after impact (CAI) of Double-Double composite laminates

Microscopic Progressive Damage Simulation and Scale-Span Analysis of Cross-Ply Laminate Based on the Elastic–Plastic Theory

A Combined Experimental and Computational Analysis of Failure Mechanisms in Open-Hole Cross-ply Laminates under Flexural Loading