Abstract:This article is focused on the experimental study of flexural properties in different multi-layer carbon fiber-reinforced polymer (CFRP) composites and correlations with the results of finite element method (FEM) simulations of mechanical properties. The comparison of the results shows the possibility of reducing the number of experimental specimens for testing. The experimental study of flexural properties for four types of carbon fiber-reinforced polymer matrix composites with twill weaves (2 × 2) was carried out. As input materials, pre-impregnated carbon laminate GG 204 T and GG 630 T (prepreg) and two types of carbon fiber fabrics (GG 285 T and GG 300 T (fabric)) were used. Multi-layer samples were manufactured from two types of prepregs and two types of fabrics, which were hand-impregnated during sample preparation. The layers were stacked using same orientation. All specimens for flexural test were cut with the longer side in the weft direction. Pre-impregnated carbon laminates were further impregnated with resin DT 121H. Carbon fabrics were hand-impregnated with epoxy matrix LG 120 and hardener HG 700. To fulfill the aim of this research, finite element method (FEM)-based simulations of mechanical properties were performed. The FEM simulations and analysis were conducted in Hexagon's MSC Marc Mentat 2022.3 and Digimat 2022.4 software. This paper presents the results of actual experimental bending tests and the results of simulations of bending tests for different composite materials (mentioned previously). We created material models for simulations based on two methods—MF (Mean Field) and FE (Finite Element), and the comparative results show better agreement with the MF model. The composites (GG 285 T and GG 300 T) showed better flexural results than composites made from pre-impregnated carbon laminates (GG 204 T and GG 630 T). The difference in results for the hand-impregnated laminates was about 15% higher than for prepregs, but this is still within an acceptable tolerance as per the reported literature. The highest percentage difference of 14.25% between the simulation and the real experiment was found for the software tool Digimat FE 2022.4 – GG 630 T composite. The lowest difference of 0.5% was found for the software tool Digimat MF 2022.4 – GG 204 T composite. By comparing the results of the software tools with the results of the experimental measurements, it was found that the Digimat MF 2022.4 tool is closer to the results of the experimental measurements than the Digimat FE 2022.4 tool.

What problem does this paper attempt to address?

The purpose of this paper is to study the bending performance of different multilayer carbon fiber reinforced polymer (CFRP) composites and to compare and analyze their experimental results with finite element method (FEM) simulation results. Specifically, the objectives of the paper include: 1. **Experimental Study**: Conducting an experimental study on the bending performance of four different types of carbon fiber reinforced polymer composites using the three-point bending test method. These four materials include two types of prepreg carbon laminates (GG 204 T and GG 630 T) and two types of hand-impregnated carbon fiber fabrics (GG 285 T and GG 300 T). 2. **Simulation Analysis**: Using finite element method (FEM) software (such as MSC Marc Mentat 2022.3 and Digimat 2022.4) to perform simulation analysis of the mechanical properties of these composites. 3. **Results Comparison**: Comparing the experimental measurement results with the FEM simulation results to verify the effectiveness of the simulation method and explore the possibility of reducing the number of experimental samples. 4. **Material Optimization**: By comparing the experimental results of different materials, it is found that hand-impregnated carbon fiber fabrics (GG 285 T and GG 300 T) have better bending performance, thus providing a reference for future design and manufacturing. In summary, the main purpose of this paper is to evaluate and optimize the bending performance of multilayer carbon fiber reinforced polymer composites through experimental and simulation methods, and to verify the application effect of the finite element method in this field.

Comparison of Mechanical Property Simulations with Results of Limited Flexural Tests of Different Multi-Layer Carbon Fiber-Reinforced Polymer Composites

Flexural and sinking stiffnesses investigation of metal, glass fiber reinforced plastic and hybrid laminates through a semi‐experimental method

Computational Analysis of Mechanical Properties in Polymeric Sandwich Composite Materials

Mechanical Properties and Economic Analysis of Fused Filament Fabrication Continuous Carbon Fiber Reinforced Composites

Mechanical Characterization of Hybrid Steel Wire Mesh/Basalt/Epoxy Fiber-Reinforced Polymer Composite Laminates

Validation of a finite element method for simulation of components produced by continuous carbon fiber reinforced additive manufacturing

Deformation Behavior and Fracture Patterns of Laminated PEEK- and PI-Based Composites with Various Carbon-Fiber Reinforcement

Finite Element Analysis of the Carbon Fiber Reinforced Polymers (CFRP) With Epoxy Resin

Experimental investigation on mechanical property analysis of long and short fiber glass

Experimental and theoretical investigation on tensile properties and fracture behavior of carbon fiber composite laminates with varied ply thickness

Effects of Fiber-Type on the Microstructure and Mechanical Properties of Carbon/carbon Composites

Measurement of the Flexural Modulus of Chopped Carbon Fiber Tape Reinforced Thermoplastic with Short Beams

Mechanical properties of fiber reinforced polymer composites: A comparative study of conventional and additive manufacturing methods

ANALYSIS OF PRINTING PARAMETERS IN 3D PRINTED CARBON FIBER COMPOSITES USING DESIGN OF EXPERIMENTS

Flexural performance test of carbon fiber reinforced composite sandwich beams with cedarwood core

A New Method for Compression Testing of Reinforced Polymers

A Mechanistic Model for Tensile Property of Continuous Carbon Fiber Reinforced Plastic Composites Built by Fused Filament Fabrication

The Effect of Fiber Position and Polymerization Condition on the Flexural Properties of Fiber-Reinforced Composite

Experimental Study of Mechanical Properties of 3D Braided Aramid/carbon Fiber Composites

Experimental and numerical characterization of flexural properties and failure behavior of CFRP/Al laminates

Development of Improved Flexural and Impact Performance of Kevlar/Carbon/Glass Fibers Reinforced Polymer Hybrid Composites