Abstract:As a heterogeneous anisotropic material, the failure behavior of composite laminate is very complicated. In order to meet manufactural and functional requirements, it is unavoidable to have cutouts on primary composite structures. However, it makes the failure criterions face new challenges due to the more complicated failure processes of composite laminates with big cutouts. In this paper the strength analysis of carbon fiber reinforced composite laminate with big cutout under unidirectional tension is studied by numerical analysis and experimental tests. Firstly, consider the composite laminates with different layups, such as [0]10 unidirectional laminate, [0/90]5 and [±45]5 cross-ply laminates, and different circle cutouts, Hashin criterion and stiffness degradation model are applied to analyze the progressive failure process under unidirectional tension by numerical simulation to obtain the ultimate load and failure mode for each laminate. Furthermore, according to the numerical models, experiments are carried out based on 3D digital image correlation (DIC) method. Results show that the failure mode of fiber reinforced composite laminate with big cutout under unidirectional tension is a typical brittle fracture, and the crack onset happens to the high stress concentration area. In addition, the failure mode and crack propagation strongly depend on the ply sequences and the cutout size. Therefore, comparing to others, [±45]5 cross-ply laminate with big cutout has the lowest ultimate load for its serious delamination failure mode. The bigger of the cutout size, the lower of ultimate load. After comparison of experimental and numerical results, it is concluded that the numerical simulation for strength analysis of composite laminate should be improved by further developed criterions.

Analysis of CFRP Laminates Properties under Different Layup Structure using Finite Element Analysis

Influence of Fiber Cutting at the Composite Grid Intersection on the Compressive Performance of Laminate

Impact responses and residual flexural properties of narrow CFRP laminates

3D FEA Modelling of Laminated Composites in Bending and Their Failure Mechanisms

Deformation and Fracture Mechanisms of Automated Fiber Placement Pre-Preg Laminates under Out-of-plane Tensile Loading

The Role of Ply Angle in Interlaminar Delamination Properties of CFRP Laminates

Failure Modes and Strength Prediction of Thin Ply CFRP Angle-Ply Laminates

Experimental and theoretical investigation on tensile properties and fracture behavior of carbon fiber composite laminates with varied ply thickness

The damage of low-velocity impacted cfrp laminates with different stacking sequences based on micro-mechanics of failure

Prediction of Bending Stiffness for Laminated CFRP and Its Application to Manufacturing of Roof Reinforcement

Compression Mechanics for Carbon-Fiberreinforced Epoxy Resin Composites Under Inplane and Out-Of-Plane Quasi-Static and Dynamic Loadings

CFRP Thin-Ply Fibre Metal Laminates: Influences of Ply Thickness and Metal Layers on Open Hole Tension and Compression Properties

STRENGTH ANALYSIS OF FIBER REINFORCED COMPOSITE LAMINATES WITH BIG CUTOUTS 1)

Three Dimensional Elastic-plastic Finite Element Analysis of Tensile Properties of Carbon Fibre Reinforced Aluminium Alloy Laminates

Effect of Impactor velocity and boundary condition on low velocity impact finite element modelling of CFRP composite laminates

The Influence of Ply Stacking Sequence on Mechanical Properties of Carbon/Epoxy Composite Laminates

Effect on mechanical properties of CFRP composites in different fiber orientations

Experimental and Numerical Study of Low-Velocity Impact and Tensile after Impact for CFRP Laminates Single-Lap Joints Adhesively Bonded Structure

An insight into the mechanical behavior and failure mechanism of CFRP/Al adhesively bonded structures subjected to low-velocity impact

Damage onset in CFRP single lap joint for DD and QUAD laminates

Experimental and numerical study on the tensile failure behavior of toughened-interlayer composite laminates with automated fiber placement (AFP) induced gap and overlap defects