Abstract:Summary Batch transportation of oil and water is a new transportation method in oil and gas gathering and transportation pipelines. Its corrosion inhibition effect has been preliminarily verified in a horizontal pipe experiment. However, achieving overall visualization in traditional loops is difficult, resulting in limited flow pattern classification and analysis of influencing factors. Combining the advantages of the traditional flow loop and the wheel flow loop, we introduce in this paper a round-head straight pipe loop and analyze the influence of key factors on the evolution of the flow pattern of the oil-water interface and the dimensionless length of the oil-water film (L~o, L~w) on the pipe wall through computational fluid dynamics (CFD) numerical simulation. The results show that the batch transportation of oil and water using the round-head straight pipe loop is more in line with the flow characteristics of oil and water two-phase flow in gathering pipelines. Three distinct three-layered flow patterns were identified, which are Flow Pattern I (oil-in-water in the upper layer, annular flow in the middle layer, and oil as the annular phase, water as the core phase, and oil-in-water in the lower layer, abbreviated as DW/O-AN-DW/O), Flow Pattern II (oil phase in the upper layer, annular flow in the middle layer, water as the annular phase, oil as the core phase, and oil in the lower layer, abbreviated as O-AN-O), and Flow Pattern III (oil phase in the upper layer, water-in-oil dispersion flow in the middle layer, and oil in the lower layer, abbreviated as O-DO/W-O). Additionally, parametric analysis reveals that the velocity of the rigid body (ν) has the greatest influence on the coverage rate of the oil film on the pipe wall, followed by the viscosity of crude oil. The density of crude oil has the least influence. The round-head straight pipe loop model offers an accurate simulation of the process of oil and water batch transportation in actual production pipelines. Therefore, the corrosion mitigation efficiency increases with the increase in oil viscosity when the viscosity of the oil lies within the range of 0.01–1 Pa·s. This increase is due to the formation of a more stable oil film on the pipe wall at higher viscosities. When the speed of the rigid body ranges from 0.5 to 1 m/s, due to the small fluid velocity, the erosion effect on the oil film on the pipe wall is relatively small, and the corrosion mitigation efficiency remains stable within a wide range.

Predictive Model of Restart-Up Pressure Drop after Shutdown for Heavy Oil–Water Ring Transportation Pipeline

Analysis of restart-up pressure drop characteristics of heavy oil-water ring transportation pipeline

Experimental investigation on the restart characterization of shale oil-water flow in a horizontal pipe

Rheological Behavior of Heavy Crude Oil and Its Emulsions

Oil–Water Hydrodynamics Model during Oil Displacement by Water in Down-Hill Mobile Pipeline

Cross-dimensional isothermal model for the transient restart of weakly compressible laminar/turbulent flow of time-dependent non-Newtonian fluid in a long pipeline

Study on the Flow Characteristics of Heavy Oil-Water Two-Phase Flow in the Horizontal Pipeline

Experimental investigation on flow patterns and pressure gradients of shale oil-water flow in a horizontal pipe

Study on the Pressure Drop Variation and Prediction Model of Heavy Oil Gas-Liquid Two-Phase Flow

Reservoir recovery study with stability analysis model constructed by water-driven oil flat sand filling experiment: example of well area X in Tankou oilfield, China

Pressure drop prediction model of the gas-liquid stratified flow development section in the horizontal pipeline

A pressure drop model of post-fracturing shut-in considering the effect of fracturing-fluid imbibition and oil replacement

Computational Fluid Dynamics Simulation of Oil-Water Batch Transport in a Pumpless Virtual Flow Loop

Investigation on Flow Patterns and Pressure Drops of Highly Viscous Crude Oil–water Flows in a Horizontal Pipe

A New Comprehensive Model for Predicting the Pressure Drop of Flow in the Horizontal Wellbore

Theoretical Model on Transient Performance of a Centrifugal Pump under Start-Up Conditions in Pumped-Storage System

Theoretical Prediction Model of Transient Performance for a Mixed Flow Pump under Fast Start-Up Conditions

Investigation on Method of Water Holdup Prediction for Oil-Water Flow in Vertical Pipes

Study on Predicting Liquid Production Profile in Horizontal Wells Considering the Mechanism of Annular Flow Resistance and Water Control

Research on heat transfer characteristics of long-distance pipeline under shutdown and maintenance conditions

Study on the Hydrodynamic Performance and Stability Characteristics of Oil-Water Annular Flow Through a 90° Elbow Pipe