Abstract:The global energy shortage is gradually intensifying. A pump is a versatile device with significant power consumption in energy conversion equipment. Of the world's total energy generated, pumps consume about 20%. With the continuous expansion of the application field, the pump's transient working characteristics are increasingly getting important for energy saving and consumption reduction. Due to ignoring the influence of impeller rotational acceleration and fluid inertia, traditional methods have significant errors in predicting transient energy conversion characteristics, which leads to improper design and unreasonable lectotype, resulting in low pump operation efficiency. Improving the prediction accuracy of transient energy characteristics and ultimately improving the pump operation efficiency is considered to be the key solution to reducing energy consumption. Therefore, this research paper proposes a prediction model of transient energy characteristics in a mixed-flow pump. Firstly, the dynamic hydraulic torque, an important parameter of energy growth during the start-up process was calculated according to the momentum moment equation. Secondly, based on the torque energy balance equation and the relative Bernoulli equation, the transient head expression during the start-up process of the mixed-flow pump is derived, and the saddle area correction is carried out. Finally, considering the additional shaft power loss caused by the pump's backflow and clearance leakage flow, a calculation method for the instantaneous energy conversion efficiency of the mixed-flow pump is established. The accuracy of the model is compared with traditional quasi-steady-state calculation results. The results show that the predicted head of the model is in good agreement with the test head, the head estimation error is reduced from 15% to 5%, and the modified head in the saddle area is closer to the test value. In addition, this study also shows the ability of the model to simulate different start-up modes and start-up times. The models presented in this paper help guide the transient hydraulic design and prediction of transient energy characteristics of pumps.

Theoretical Prediction Model of Transient Performance for a Mixed Flow Pump under Fast Start-Up Conditions

Theoretical Model on Transient Performance of a Centrifugal Pump under Start-Up Conditions in Pumped-Storage System

Numerical Study on Transient Performance of Mixed Flow Pump During Starting Period

Prediction model for energy conversion characteristics during transient processes in a mixed-flow pump

Study on Transient Hydrodynamic Performance of Mixed-Flow-Pump During Starting Period

Study on the Transient Characteristics of Pump During the Starting Process with Assisted Valve

Transient Internal Characteristic Study of a Centrifugal Pump During Startup Process

Study On Transient Hydrodynamic Performance And Cavitation Characteristic Of High-Speed Mixed-Flow Pump

Transient effect analysis of centrifugal pump during rapid starting period

Three-dimensional simulation of unsteady flows in a pump-turbine during start-up transient up to speed no-load condition in generating mode

Numerical Simulation of the Transient Flow in A Centrifugal Pump During Starting Period

Experimental study on the transient characteristics and flows in a centrifugal pump during starting period

Study on the Transient Characteristics of the Centrifugal Pump during the Startup Period with Assisted Valve

Analysis on Transient Performance of Mixed Flow Pump During Stopping Period

Experimental and Numerical Study of Transient Flow in a Centrifugal Pump During Startup

Theoretical analysis and numerical simulation of centrifugal pump during rapid starting period

Research on the Transient Hydraulic Characteristics of Multistage Centrifugal Pump During Start-Up Process

Transient Hydraulic Performance of a Prototype Pump during Starting and Stopping Periods

Study on transient characteristics of centrifugal pump during starting period

The acceleration effect of pump as turbine system during starting period

Comparative Experiments on a Self-priming Pump Delivering Water Medium During Rapid and Slow Starting Periods