Abstract:Parameter and Waveform analysis of energy evolution. The objective of this paper is to analyze the mechanical properties and damage mechanisms of carbon fiber‐reinforced polyamide thermoplastic composite laminates. Four specimens with different ply orientations were designed for open‐hole tensile experiments, and interlaminar toughness experiments including double cantilever beam and end‐notched flexural were carried out. The experimental process was monitored synchronously using acoustic emission, and the strain field changes of the tensile specimens were captured using digital image correlation technology. The unsupervised clustering of the peak frequencies of the acoustic emission signals based on the K‐means++ algorithm was employed to ascertain the peak frequency ranges corresponding to the various damage modes. Typical signals from different specimens were selected, and the gray wolf algorithm was used to optimize the variational modal parameters to decompose the signals. The waveform characteristics, frequency components, and Hilbert spectra of each damage mode were given. The correlation analysis of the intrinsic mode function (IMF) components of the same damage in different specimens demonstrated that the IMF components exhibited high similarity. By analyzing the time series changes in the energy of each damage mode in different specimens, the contribution of different damage modes to the evolution of laminated plate damage was evaluated. Highlights The mechanical properties of CF/PA6 laminates were investigated based on open‐hole tensile specimens and pre‐cracked delamination specimens. Unsupervised clustering of AE peak frequencies using K‐means++ to establish the relationship between peak frequencies and damage patterns. AE counts and cumulative energy were used to assess damage evolution. By identifying a single damage signal and providing a more intuitive treatment of the damage energy evolution.

Tensile Fatigue Behavior and Damage Evolution of Z-Pinned Carbon/phenolic Woven Composite Using In-Situ Monitoring Technology

A Study of the Damage of Composite Laminates under Different Types of Loadings Based on Acoustic Emission Technology

Tensile Damage Evolution of 2D SiC(f)/BN(i)/(SiC-B4C)(m) Composites Based on Acoustic Emission Pattern Recognition

An Experimental Analysis for Damage Monitoring in Glass Fiber/Epoxy Composites During Fatigue Tests by Acoustic Emission

Investigation on damage behaviors of carbon fiber‐reinforced nylon 6 thermoplastic composite laminates using acoustic emission and digital image correlation techniques

Delamination Analysis of Carbon Fiber/Epoxy Composite Laminates under Different Loading Rates Using Acoustic Emission

Investigation on Damage Evolution of Open-Hole Plain Woven Composites under Tensile Load by Acoustic Emission Signal Analysis

Damage Evolution and Real-Time Non-Destructive Evaluation of 2d Carbon-Fiber/Sic-Matrix Composites under Fatigue Loading

Infrared Thermography and Acoustic Emission in 2D Plain Woven C/Sic Composites under Tensile-Tensile Fatigue Loading

Acoustic Emission Characteristics in Composites During Experimental Research

Investigation on the Behavior of Tensile Damage Evolution in T700/6808 Composite Based on Acoustic Emission Technology

A Study on Damage of T800 Carbon Fiber/Epoxy Composites under In-Plane Shear Using Acoustic Emission and Digital Image Correlation

A New Quantitative Acoustic Emission Model for Damage Characterization of Composite Laminates Using Original Waveforms

Acoustic Emission Characterization of Damage Patterns in Composite Scarf Joints Using Unsupervised Learning

A Waveform Clustering Method for Damage Mode Identification for Composite Laminates under Hygrothermal Environment

Fatigue damage monitoring of composite laminates based on acoustic emission and digital image correlation techniques

Fatigue life assessment and damage evolution in Z-pinned laminates

Flexural progressive damage and failure behavior of carbon-aramid/epoxy hybrid woven composites

Damage Monitoring in Fiber-Reinforced Composites under Fatigue Loading Using Carbon Nanotube Networks

In-situ Damage Assessment of FML Joints under Uniaxial Tension Combining with Acoustic Emission and DIC: Geometric Influence on Damage Formation

Failure behavior and damage visualization of thick carbon/aramid hybrid woven composites under flexural loading conditions