Abstract:Concept of electrical monitoring of structural health using integrated CNTYs. Continuously long carbon nanotube yarns (CNTYs) were integrated into glass fiber weave/vinyl ester composites to act as electrical sensing elements to self‐monitoring damage. A grid comprising one longitudinal and three transverse CNTYs, running through the 125 mm long flexural specimen, was integrated into the top and bottom layers of glass fiber weaves to allow monitoring of the electrical resistance and locate damage. Four‐point bending specimens were tested under cyclic flexural loading, alternating with low‐velocity impacts to monitor damage initiation and progression. The electrical response of the CNTY grid is able to pinpoint the region where damage initiates, accumulates, and propagates under cycling loading, triggered or not by impact. The damage location identified by the electrical response of CNTYs is supported by in situ in‐plane and through‐thickness strain fields measured by digital image correlation (DIC). The correlation between the electrical technique and the DIC‐measured strain fields indicate that the majority of damage occurs through interlaminar stresses at or near the supports and/or loading introduction elements of the flexural test rig. Integrating CNTYs into structural composites enables online damage monitoring, leading to intelligent condition‐based maintenance for naval ships, aircrafts, and other structures, ultimately extending service life and reducing costs. Highlights CNTYs were integrated into composites for damage self‐sensing. Electrical response of CNTYs pinpoints the region of damage. Damage caused by cyclic bending and low velocity impacts were identified. Electrically identified damage is supported by DIC.

Damage Monitoring in Fiber-Reinforced Composites under Fatigue Loading Using Carbon Nanotube Networks

Interfacial Strengthening and Self-Monitoring in Carbon Fiber-Reinforced Composites via Carbon Nanotube-Based Damage Sensors

Review of Self-Sensing of Damage and Interfacial Evaluation Using Electrical Resistance Measurements in Nano/micro Carbon Materials-Reinforced Composites

Concurrent Multiscale Modeling of In-Plane Micro-Damage Evaluation in Z-pinned Composite Laminates

Structural health monitoring of carbon nanotube-modified glass fiber-reinforced polymer composites by electrical resistance measurements and digital image correlation

In Situ Damage Sensing in the Glass Fabric Reinforced Epoxy Composites Containing CNT–Al2O3 Hybrids

The use of carbon nanotubes for damage sensing and structural health monitoring in laminated composites: a review

Structural health monitoring of carbon fiber reinforced matrix by the resistance variation method

Structural Health Monitoring of Glass Fiber-Reinforced Polymer Laminates with Carbon Nanotube-Coated Glass Fiber Sensing Layer after Low-Velocity Impact Using Electrical Resistance Tomography

Integration of carbon nanotube yarns into glass‐fiber reinforced composites for electrical self‐sensing of damage under cyclic bending and impact loading

Tensile damage self-monitoring of carbon fiber/epoxy 3D braided composites with electrical resistance method

Large-scale deformation and damage detection of 3D printed continuous carbon fiber reinforced polymer-matrix composite structures

Self-Sensing Of Position-Related Loads In Continuous Carbon Fibers-Embedded 3d-Printed Polymer Structures Using Electrical Resistance Measurement

Augmenting the fracture toughness and structural health monitoring capabilities in Kevlar/epoxy composites using carbon nanotubes

Scalable and passive carbon nanotube thin-film sensor for detecting micro-strains and potential impact damage in fiber-reinforced composite materials

A technique for real-time detecting, locating, and quantifying damage in large polymer composite structures made of carbon fibers and carbon nanotube networks

Mechanical properties and structural health monitoring performance of carbon nanotube-modified FRP composites: A review

Real-time Structural Health Monitoring of Carbon Fiber-reinforced Plastic Sandwich Structures with Carbon Nanotube-dispersed Core Using Electromechanical Behavior Data

Effects of carbon nanotubes on open-hole carbon fiber reinforced polymer composites

On-line tensile damage monitoring of WGF/epoxy T-joint by the embedded MWCNT@WGF sensor

Progressive damage and tensile failure of open‐hole carbon fiber polymer composites reinforced by carbon nanotubes