Abstract:A new strategy; cation and anion dual gradient, is proposed and successfully constructed at the surface of LiCoO2 to minimize the highly oxidized Co4+ and O− species when charged to high potentials, which not only suppresses the relevant surface side reactions, but also affected the Li+ diffusion kinetics through the induced spinel‐like surface structure, making LiCoO2 exhibit excellent cycling stability and rate capability at the high cutoff voltage of 4.6 V, further validated in the 4.55 V pouch full cell (equivalent to 4.6 V vs Li/Li+).LiCoO2 (LCO) is the most successful cathode material for commercial lithium‐ion batteries. Cycling LCO to high potentials up to 4.5 V or even 4.6 V can significantly elevate the capacity but cause structural degradation due to the serious surface side reaction between the highly oxidized Co4+ and O− species with organic electrolytes. To tackle this concern, a new strategy, constructing cation and anion dual gradients at the surface of LCO (DG‐LCO), is proposed. Specifically, the electrochemically inactive cation and anion are selected to substitute Co3+ and O2− at the surface in a gradated manner, thus minimizing the highly oxidized Co4+ and O− species at high potentials and suppressing the induced surface side reactions. Unexpectedly, this dual gradient design leads to a spinel‐like surface structure coherently with bulk layered structure, which facilitates Li+ diffusion kinetics. Thus, DG‐LCO achieves high capacity and excellent cycling stability at 4.6 V (≈216 mA h g−1 at 0.1 C, a capacity retention of 88.6% after 100 cycles in 1.8 A h pouch full cell at 1 C), as well as improved rate capability (≈140 mA h g−1 at 5 C). These studies provide useful guidelines for future design of cathode materials with long lifespan and high rate capability.

Enhancement of the Fragile Interface of High Voltage LiCoO2 by Surface Gradient Permeation of Trace Amounts of Mg/F

Collective Surface Enabling an Ultralong Life of LiCoO2 at High Voltage and Elevated Temperature

Structure/Interface Coupling Effect for High‐Voltage LiCoO2 Cathode

Simultaneous Near‐Surface Trace Doping and Surface Modifications by Gas–Solid Reactions during One‐Pot Synthesis Enable Stable High‐Voltage Performance of LiCoO2

Structure/Interface Coupling Effect for High‐Voltage LiCoO2 Cathodes

Surface Design with Cation and Anion Dual Gradient Stabilizes High‐Voltage LiCoO2

Structure/Interface Coupling Effect for High‐Voltage LiCoO<sub>2</sub> Cathodes

Ultrathin Dense LiF Coverage Coupled with a Near-Surface Gradient Fluorination Lattice Enables Fast-Charging Long-Life 4.6 V LiCoO2

Unraveling the Distinct Roles of Mg Occupation on Li or Co Sites on High-Voltage LiCoO 2

Lattice‐Matched Interfacial Modulation Based on Olivine Enamel‐Like Front‐Face Fabrication for High‐Voltage LiCoO2

Stable Cycling of LiCoO2 at 4.55 V Enabled by Combined Mg Doping and Surface Coating of NASICON-type Electrolyte

Scalable Precise Nanofilm Coating and Gradient Al Doping Enable Stable Battery Cycling of LiCoO2 at 4.7 V

Unraveling the Distinct Roles of Mg Occupation on Li or Co Sites on High-Voltage LiCoO2

Ultra-thin and Mechanically Stable LiCoO2-Electrolyte Interphase Enabled by Mg2+ Involved Electrolyte

Surface Design with Cation and Anion Dual Gradient Stabilizes High‐Voltage LiCoO 2

Multiple Surface Optimizations for a Highly Durable LiCoO<sub>2</sub> beyond 4.6 V

A well-matched MgNiO 2 surface heterointerface layer to enhance the cycling stability of cobalt-free Li-rich Mn-based cathode materials

Improving diffusion kinetics and phase stability of LiCoO2 via surface modification at elevated voltage

Synergistic effect of fluorinated solvent and Mg2+ enabling 4.6 V LiCoO2 performances

Long‐Term Highly Stable High‐Voltage LiCoO2 Synthesized via a Solid Sulfur‐Assisted One‐Pot Approach

Ultrathin dense LiF coverage coupled with a near-surface gradient fluorination lattice enables fast-charging long-life 4.6 V LiCoO<sub>2</sub>