Microstructure and Elastocaloric Effect of NiTi Shape Memory Alloy In-Situ Synthesized by Laser Directed Energy Deposition Additive Manufacturing

Shuyao Wang,Yongjun Shi,Kaijun Fan,Qin Wang,Ying Li,Xiangjie Teng

DOI: https://doi.org/10.1016/j.matchar.2024.113831

IF: 4.537

2024-01-01

Materials Characterization

Abstract:The NiTi SMAs were successfully in-situ synthesized by LDED additive manufacturing, and the microstructural evolution and elastocaloric effect of the NiTi SMAs along parallel and perpendicular to the build direction (BD) were investigated. The NiTi SMAs at room temperature consisted of B2 austenite, B19' martensite and the precipitation phase Ti2Ni, 2 Ni, which was diffusely distributed within the B2 grains and at grain boundaries. Grain morphology that crosses the molten pool boundary and elongates along the thermal gradient is found in the plane parallel to the BD direction. NiTi SMAs loaded perpendicular to the BD direction have less energy loss and fewer stress mechanical training times to obtain fully recoverable stress-strain behavior, which shows better stress-strain response behavior than that loaded parallel to the BD direction. The maximum strain and adiabatic temperature changes follow a monotonically increasing trend from the maximum stress when the compressive stress was applied along parallel and perpendicular to the BD direction and rapidly removed. When the 900 MPa stress was removed, the adiabatic temperature changes reached-5.2 K and-5.9 K, respectively. The degradation of the elastocaloric effect of loading parallel to the BD direction reaches 15% after 100 stress-strain cycles (800 MPa). In contrast, the degradation of loading perpendicular to the BD direction is negligible. This work provides a new idea to realize the preparation of NiTi SMAs and to study the elastocaloric effect of NiTi SMAs.