Abstract:Gasification of biomass waste is considered as a green and sustainable solution to reduce waste volumes and recover energy by producing syngas. In this study, both experiment and simulation have been conducted to understand the various physical and chemical effects in a fixed bed downdraft gasifier and to provide researchers with a tool to overcome the need to conduct cost intensive experiments for predicting and optimizing energy efficiencies. A combined transient single particle and fuel-bed model is developed to describe the entire packed bed in the flow direction of primary air and intraparticle phenomena. The reactor is discretized and in each cell one representative particle is chosen to be modelled as shrinking sphere. The reactor was divided into three regions due to the difference of air velocity in each region: natural convection region, mixed convection region and forced convection region. Sensitivity analysis has been conducted to determine the boundary location of each region. The presented model considers drying, pyrolysis, homogeneous gas reactions, and heterogeneous combustion/gasification reactions. In the gas phase eight species (O2, N2, CO, CO2, H2, H2O, CH4 and tar) are considered. The solid phase is biomass waste, in which all the components obtained from approximate analysis (moisture, volatiles, fixed carbon and ash) and ultimate analysis (C, H, O, N) are treated as dependent variables of time and space. This model can predict production rate and quality of both synthetic gas and produced char from gasifier reactor. The optimized biomass properties, equivalence ratio and air inlet location for maximum energy efficiency can also be obtained from this model. Experiments have been conducted to investigate the effects of different parameters on gasification performance, such as biomass moisture content, particle size and shape, equivalence ratio, etc. The experimental results are also used to validate against simulation results and the deviation between the numerical and experimental results obtained in this study is lower than 10%.

CFD simulation of soot generation during biomass gasification in a cyclone gasifier

Soot Formation During Biomass Gasification: A Critical Review

CFD Simulation of the Steam Gasification of Millimeter-Sized Char Particle Using Thermally Thick Treatment

Biomass Gasification in a Fixed Bed Downdraft Gasifier: Experimental Study and Comprehensive Reactor and Particle Modelling

Effects of operating conditions and reactor structure on biomass entrained-flow gasification

Multi-Scale Simulation of Biomass Gasification in Fluidized Beds

Experiments and Numerical Simulation of Sawdust Gasification in an Air Cyclone Gasifier

CFD–DEM simulation of biomass gasification with steam in a fluidized bed reactor

CFD Modeling of Sawdust Gasification in a Lab-Scale Entrained Flow Reactor Based on Char Intrinsic Kinetics. Part 2: Parameter Study and Multi-Objective Optimization

Large Eddy Simulation of Soot Formation in a Turbulent Lifted Flame with a Discretized Population Balance and a Reduced Kinetic Mechanism

Numerical simulation of gasification characteristics in a circulating fluidized bed biomass gasifiers

Numerical Analysis of Biomass Gasification in a Fluidized Bed Reactor Using a Computational Fluid Dynamics Model Integrated with Reduced-Order Reaction Kinetics

Experimental and Numerical Investigation of Flow Field and Soot Particle Size Distribution of Methane-Containing Gas Mixtures in a Swirling Burner

Modeling Biomass Gasification in Circulating Fluidized Beds

Modeling and Simulation of the Motion and Gasification Behaviors of Superellipsoidal Biomass Particles in an Entrained-Flow Reactor

Modeling and Simulation of Biomass Air-Steam Gasification in a Fluidized Bed

Soot formation during oxy-steam-reforming of biomass pyrolysis volatile matters: validation of a chemical model

Model-based Downdraft Biomass Gasifier Operation and Design for Synthetic Gas Production

Simulation of Biomass-Steam Gasification in Fluidized Bed Reactors: Model Setup, Comparisons and Preliminary Predictions

Characteristics and Mechanism of Soot Formation During the Fast Pyrolysis of Biomass in an Entrained Flow Reactor

Optimization of a Sootblowing System for Effective Deposit Removal in Radiant Syngas Cooler Using Numerical Simulation