Abstract:Activated carbons were prepared from rice hull by one-step phosphoric acid activation in this work. The evolution of pore structure and surface chemistry in the activation temperature range of 170–450°C was investigated through various characterization techniques. The results showed that the development of porosity (extent of activation) was negligible at activation temperature below 300°C, and rapid evolution occurred in 300–400°C. Porous activated carbon with bimodel pore structure (pore<1nm and pore>1nm) and BET surface area as high as 1295m2/g was obtained at 450°C. The ash contents of samples prepared in this study were in the range of 5–21%. The ash contents of carbons prepared in this study initially decreased from 21.03% to 4.89% with the change of temperature from 170 to 300°C, then increased to 8.72% at 450°C. Boehm titration results suggested that low activation temperature (⩽300°C) benefits the formation of acidic surface groups. With the increase of activation temperature from 300 to 350°C, the concentrations of strong, intermediate and weak acidic surface groups decreased from 2.23, 1.87, and 2.73 to 1.66, 1.32, and 2.16mmolH+/g, respectively. Over 350°C, the change of these groups were insignificant. FTIR results revealed the existence of carbonyl-containing, phosphorus-containing groups, and groups containing Si–O bond. The relative concentration of carbonyl-containing groups decreases with an increase in activation temperature, while that of phosphorus-containing groups follows the reverse trend. The content of Si–O decreased first, then slowly increased with the increase of activation temperature. Boehm titration and FTIR (Fourier transform infrared spectroscopy) results indicated that the surfaces of these carbons contain both temperature-sensitive and temperature-insensitive groups. The temperature-sensitive part consists mainly of carbonyl-containing groups, such as carboxylic groups, while the temperature-insensitive part is primarily phosphorus-containing groups and groups containing Si–O bond. This study demonstrated that carbon products with relative low ash content and high activation degree can be prepared from rice hull by H3PO4 activation at suitable temperature.

Synthesis of Rice Husk Activated Carbon by Fermentation Osmotic Activation Method for Hydrogen Storage at Room Temperature

Pine Sawdust Derived Ultra-High Specific Surface Area Activated Carbon: Towards High-Performance Hydrogen Storage and Supercapacitors

Green Synthesis of Nitrogen-doped Porous Carbon Derived from Rice Straw for High-performance Supercapacitor Application

Cesium Ion-Mediated Microporous Carbon For Co2 Capture And Lithium-Ion Storage

Preparation of Nanoporous Carbon from Rice Husk with Improved Textural Characteristics for Hydrogen Sorption

Preparation of Corn Straw-Based Carbon by “Carbonization-Koh Activation” Two-Step Method: Gas–solid Product Characteristics, Activation Mechanism and Hydrogen Storage Potential

Preparation of Activated Carbon from Pyrolyzed Rice Husk by Leaching out Ash Content after CO2 Activation

Increase in H2 storage capacity of nanoporous carbon fabricated from waste rice husk via improving the mode of the reaction mixture cooling down

Degradation of biomass components to prepare porous carbon for exceptional hydrogen storage capacity

Optimization of biomass-based carbon materials for hydrogen storage

Conversion of rice husks into carbonaceous materials with porous structures via hydrothermal process

Rice husk-based activated carbons with high mesoporosity prepared by a combination of CO2 activation and boiling in an alkaline solution

Synthesis of activated carbon from high-carbon coal fly ash and its hydrogen storage application

Tuning the textural properties and surface chemistry of table sugar derived activated porous carbons for improved hydrogen storage

Rice Hull-Derived Carbon for Supercapacitors: Towards Sustainable Silicon-Carbon Supercapacitors

Porous carbon made from rice husk as electrode material for electrochemical double layer capacitor

Dye Removal of Activated Carbons Prepared from NaOH-pretreated Rice Husks by Low-Temperature Solution-Processed Carbonization and H3PO4 Activation

Potassium and Zeolitic Structure Modified Ultra-microporous Adsorbent Materials from a Renewable Feedstock with Favorable Surface Chemistry for CO2 Capture.

Facile fabrication of N/O co-doped activated carbon hollow fibers for hydrogen storage at atmospheric pressure

Micro-nano scale synchronous "carving" of viscose fiber in activation process for atmospheric hydrogen storage

Activated Carbons Prepared from Rice Hull by One-Step Phosphoric Acid Activation