Abstract:Flash sintering is a novel field-assisted sintering technology for ceramics that allows a dramatic reduction in processing time and temperature. Since 2010, when flash sintering was first reported, it has been a focus of research interest in the field of materials science. Recent study results have confirmed that the sintering temperature decreases with the strength of the applied electric field; for some ceramics, the sintering temperature can be lowered even to room temperature. This represents an innovative breakthrough for ceramic sintering at ultra-low temperatures. However, once the electric field strength in flash sintering is increased, new questions and challenges arise, such as whether or not partial discharge occurs in the green body if under electro-thermal coupling stress, how to quantitatively analyse the impact of discharge on sintering, and, moreover, whether the sintering mechanism under a strong electric field is consistent with that under a weak electric field. These research questions require knowledge of partial discharge detection, dielectric theory, and other topics that are beyond the scope of materials science. To address this need, this review summarises the work carried out in flash sintering with a strong electric field from the perspective of high voltage and insulation technology. First, the flash sintering process and mechanism are briefly introduced. Then, the published literature on flash sintering with a strong electric field for various ceramic materials is summarised in depth. In addition, experimental phenomena that are observed in flash sintering with a strong electric field, such as flash and blackening, are discussed. Finally, some suggestions for future work are presented. It is anticipated that the knowledge gap between different areas of study can be filled by this review.

Flash Sintering of ZnO Ceramics with Combined Power Supplies at Room Temperature

Flash Sintering of ZnO Ceramics at Room Temperature with Bisectional Electrode Distributions

Two-Step Flash Sintering of ZnO Ceramics at Room Temperature

Alternating Current Field Flash Sintering 99% Relative Density ZnO Ceramics at Room Temperature

Flash Sintering of ZnO Ceramics at 50 °C under an AC Field

Effect of atmospheric conditions on the onset electric field of ZnO and Y<sub>2</sub>O<sub>3</sub> ceramics flash sintering at room temperature

Flash Sintering of Lead Zirconate Titanate Ceramics under High Voltage at Room Temperature

Effect of atmospheric conditions on the onset electric field of ZnO and Y2O3 ceramics flash sintering at room temperature

Ethanol-Induced Flash Sintering of ZnO Ceramics at Room Temperature

A simple optimized design of an electrode to conduct flash sintering at room temperature and low onset electric field

ZnO as sintering aid and reactant for reactive flash sintering at room temperature

A versatile defect engineering strategy for room-temperature flash sintering

Gas-discharge induced flash sintering of YSZ ceramics at room temperature

Demonstration of the cold sintering process study for the densification and grain growth of ZnO ceramics

Review of flash sintering with strong electric field

Effect of Surface Dispersion of Fe Nanoparticles on the Room-Temperature Flash Sintering Behavior of 3YSZ

High‐performance ZnO varistor ceramics prepared by arc‐induced flash sintering with low energy consumption at room temperature

Microstructural evolution of ZnO via hybrid cold sintering/spark plasma sintering

Flash Sintering Of 8ysz Ceramics Under Ac Field

All-Materials-Inclusive Flash Spark Plasma Sintering

Formation of liquid phase and nanostructures in flash sintered ZnO