Abstract:The properties of ceramics are closely related to its grain size. For example, the smaller the grain size, the better the hardness and strength of ceramics. Inspired by the conventional two-step sintering, Luo et al. proposed two-step flash sintering. By reducing the current in the “second step” of flash sintering to inhibit the grain growth, ZnO ceramics with a grain size of about 370 nm were obtained, whose grains are far smaller than those obtained by conventional flash sintering. And we propose a different two-step flash sintering method: using high voltage AC power supply to apply a higher AC electric field to the specimens, we increased the voltage until breakdown occurred. Due to the local arc, a densified conductive channel was formed on the surface of the sample. When applying the electric field for the second time, there will be a larger current through the green, resulting in a large amount of Joule heat to make the whole green body densified rapidly. We used this method to sinter zinc oxide ceramics with a grain size of about 330 nm and a relative density of 93.3%. In addition, the ceramic grain size can be controlled by adjusting the output current during the second step. The larger output current will result in bigger grain size. More importantly, the whole two-step flash sintering process is carried out at room temperature without additional heating device, which can greatly simplify the sintering equipment and operation.

Effect of atmospheric conditions on the onset electric field of ZnO and Y2O3 ceramics flash sintering at room temperature

Effect of atmospheric conditions on the onset electric field of ZnO and Y<sub>2</sub>O<sub>3</sub> ceramics flash sintering at room temperature

Gas-discharge induced flash sintering of YSZ ceramics at room temperature

Alternating Current Field Flash Sintering 99% Relative Density ZnO Ceramics at Room Temperature

Flash Sintering of ZnO Ceramics at Room Temperature with Bisectional Electrode Distributions

Ethanol-Induced Flash Sintering of ZnO Ceramics at Room Temperature

Flash Sintering of ZnO Ceramics at 50 °C under an AC Field

Flash Sintering of ZnO Ceramics with Combined Power Supplies at Room Temperature

Two-Step Flash Sintering of ZnO Ceramics at Room Temperature

A simple optimized design of an electrode to conduct flash sintering at room temperature and low onset electric field

ZnO as sintering aid and reactant for reactive flash sintering at room temperature

Flash Sintering of Lead Zirconate Titanate Ceramics under High Voltage at Room Temperature

A versatile defect engineering strategy for room-temperature flash sintering

Effects of sintering on formation of grain core and grain growth in ZnO varistor ceramics

Temperature effect on mechanical response of flash-sintered ZnO by <i>in-situ</i> compression tests

Model of the effect of arc on flash sintering at room temperature

Mechanism analysis of arc-induced flash sintering of 3YSZ at room temperature

Effect of Surface Dispersion of Fe Nanoparticles on the Room-Temperature Flash Sintering Behavior of 3YSZ

Mechanism of flash sintering with high electric field: In the view of electric discharge and breakdown

Temperature effect on mechanical response of flash-sintered ZnO by in-situ compression tests

Electric field-induced grain boundary degradation mechanism in yttria stabilized zirconia