Abstract:Despite the extensive ongoing research on MoS2 field effect transistors (FETs), the key role of device processing conditions in the chemistry involved at the metal-to-MoS2 interface and their influence on the electrical performance are often overlooked. In addition, the majority of reports on MoS2 contacts are based on exfoliated MoS2, whereas synthetic films are even more susceptible to the changes made in device processing conditions. In this paper, working FETs with atomic layer deposition (ALD)-based MoS2 films and Ti/Au contacts are demonstrated, using current–voltage (I–V) characterization. In pursuit of optimizing the contacts, high-vacuum thermal annealing as well as O2/Ar plasma cleaning treatments are introduced, and their influence on the electrical performance is studied. The electrical findings are linked to the interface chemistry through X-ray photoelectron spectroscopy (XPS) and scanning transmission electron microscopy (STEM) analyses. XPS evaluation reveals that the concentration of organic residues on the MoS2 surface, as a result of resist usage during the device processing, is significant. Removal of these contaminations with O2/Ar plasma changes the MoS2 chemical state and enhances the MoS2 electrical properties. Based on the STEM analysis, the observed progress in the device electrical characteristics could also be associated with the formation of a continuous TiSx layer at the Ti-to-MoS2 interface. Scaling down the Ti interlayer thickness and replacing it with Cr is found to be beneficial as well, leading to further device performance advancements. Our findings are of value for attaining optimal contacts to synthetic MoS2 films.This article has not yet been cited by other publications.

High‐Performance Flexible MoS2 Transistors Using Au/Cr/Al/Au as Source/Drain Electrodes (Adv. Electron. Mater. 12/2023)

High-Performance, Highly Bendable MoS2 Transistors with High-K Dielectrics for Flexible Low-Power Systems

Improved Electrical Uniformity and Performance via Low-Cost Hybrid Wet Transfer Method for van der Waals Source/Drain Contact Formation in MoS2 Field-Effect Transistors

Multilayer MoS2 Transistors Enabled by a Facile Dry-Transfer Technique and Thermal Annealing

Enhanced Electrical Properties Of Lithography-Free Fabricated Mos2 Field Effect Transistors With Chromium Contacts

Improved Electrical Uniformity and Performance Via Low-Cost Hybrid Wet Transfer Method for Van Der Waals Source/Drain Contact Formation in MoS $_{\text{2}}$ Field-Effect Transistors

High-Performance Flexible Nanoscale Field-Effect Transistors Based on Transition Metal Dichalcogenides

Optimizing contacts for flexible transistors

Monolayer MoS2-based Transistors with Low Contact Resistance by Inserting Ultrathin Al2O3 Interfacial Layer

Enhanced Electrical Properties of Lithography-Free Fabricated MoS<sub>2</sub> Field Effect Transistors with Chromium Contacts

MoS 2 -on-AlN Enables High-Performance MoS 2 Field-Effect Transistors through Strain Engineering

All‐Transfer Electrode Interface Engineering Toward Harsh‐Environment‐Resistant MoS2 Field‐Effect Transistors (Adv. Mater. 18/2023)

Performance Upper Limit of Sub-10 nm Monolayer MoS<sub>2</sub> Transistors with MoS<sub>2</sub>-Mo Electrodes

All‐Transfer Electrode Interface Engineering Toward Harsh‐Environment‐Resistant MoS<sub>2</sub> Field‐Effect Transistors (Adv. Mater. 18/2023)

Impacts of interface contaminations on the MoS2 field effect transistors and a modified fabrication process to pursue a better interface quality

High-Performance Wafer-Scale MoS2 Transistors Toward Practical Application

Large-scale flexible and transparent electronics based on monolayer molybdenum disulfide field-effect transistors

Integrated Flexible and High‐Quality Thin Film Transistors Based on Monolayer MoS2

On the Contact Optimization of ALD-Based MoS 2 FETs: Correlation of Processing Conditions and Interface Chemistry with Device Electrical Performance

Thin Film Transistors: High‐Performance Flexible Multilayer MoS2 Transistors on Solution‐Based Polyimide Substrates (adv. Funct. Mater. 15/2016)

Advances in 2D Molybdenum Disulfide Transistors for Flexible and Wearable Electronics