Abstract:High temperature thermal conductivity up to 1200 °C and the electrical conductivity up to 800 °C were studied for (Zr-Ta-W-Ti)C-SiC (ZTaWT-S) based high entropy carbide ceramics containing carbonaceous reinforcements (multi-walled carbon nanotubes (CNT), graphite flakes (G), and graphene nanoplatelets (GNP). The thermal diffusivity (0.055–0.067 cm −2 s) and specific heat capacity (0.38–0.44 Jg −1 K −1 ) were experimentally measured from 50 °C to 1200 °C for all the composites. The thermal conductivity of the composites lies in the range of 18.2 Wm −1 K −1 to 22.9 Wm −1 K −1 for the temperature range of 50 °C-1200 °C, from the significant phonon scattering at the interfaces of the elements of different size and atomic masses. At 50 °C, the limited thermal conductivity enhancement for carbonaceous reinforcements from 18.2 Wm −1 K −1 for ZTaWT-S to 21.0 Wm −1 K −1 for ZTaWT-SC (CNT reinforcement) to 20.8 Wm −1 K −1 for ZTaWT-SG (graphite reinforcement), and to 19.9 Wm −1 K −1 ZTaWT-SGNP (graphene reinforcement) is attributed to the high thermal resistance at the interfaces between different phases and interface with carbon additives, evident in the TEM investigation of the crushed sintered sample, and at the grain boundaries (interfacial thermal resistance). The phonon and electron contribution to thermal conductivity were also assessed and the κe/κexp ratio analysis confirms the predominant role of phonon contribution to thermal conductivity (∼65%) at low temperature (∼50 °C) and of electronic contribution at high temperatures (∼800 °C) as the dominant mechanism of thermal transport in the investigated composites and ZTaWT-SGNP composite with the highest κe/κexp ratio of 0.84 (extrapolated) emerges as the most electronically conductive material.

Room Temperature Electrical and Thermal Switching CNT/Hexadecane Composites

Fabrication of Three-dimensional Thermally Conductive Carbon Fibers/Carbon Nanotubes Network Reinforce Epoxy Composites

Tunable thermal conduction character of graphite-nanosheets-enhanced composite phase change materials via cooling rate control

Thermal Conductivity Of Configurable Two-Dimensional Carbon Nanotube Architecture And Strain Modulation

Experimental study on the thermal conductivity enhancement of water based nanofluids using different types of carbon nanotubes

Thermophysical Properties of Paraffin-Based Composite Phase Change Materials Filled with Carbon Nanotubes

Tailoring carbon nanotube density for modulating electro-to-heat conversion in phase change composites.

Microstructures, thermal and mechanical properties of Al–Si-CNT composites for thermal management applications

High-Quality Conductive Network Films Constructed from Carbon Nanotube/Carbon Nanofiber Composites via Electrospinning for Electrothermal Applications

Advances of CNT-based Systems in Thermal Management

Elevated temperature thermal and electrical properties of carbon nanotubes, graphite and graphene reinforced (Zr-Ta-W-Ti)C-SiC based high entropy carbide ceramics

Studies on Thermal Conductive Properties and Mechanism of a New ACNT/C Nanocomposite Material

High Water-Absorbent and Phase-Change Heat Dissipation Materials Based on Super-Aligned Cross-Stack CNT Films

Fabrication of aluminum–carbon nanotube composites and their electrical properties

Controllable Thermal Rectification Realized in Binary Phase Change Composites

Fluorinated Carbon Nanotube/Nanofibrillated Cellulose Composite Film with Enhanced Toughness, Superior Thermal Conductivity, and Electrical Insulation

Improvement of Interface and Electrical Properties in Carbon Nanotube/nanocrystalline Copper Composite Films

Thermally conductive epoxy composites with efficient heat transfer pathways by in-situ growth of CNTs on oriented BNNS

Architectural and component design of CNTs/Al hierarchical composite for enhanced mechanical/thermal properties

Hydrophilicity regulation of carbon nanotubes as phase-change materials for thermal energy storage

Phase Morphology and Conductive Properties of PBT/POE-g-GMA/PP/CNT Nanocomposites with a Tri-Continuous Structure Via Thermal Annealing