Abstract:Despite the ever-increasing demand of nanofillers for thermal enhancement of polymer composites with higher thermal conductivity and irregular geometry, nanomaterials like carbon nanotubes (CNTs) have been constrained by the nonuniform dispersion and difficulty in constructing effective three-dimensional (3D) conduction network with low loading and desired isotropic or anisotropic (specific preferred heat conduction) performances. Herein, we illustrated the in-situ construction of CNT based 3D heat conduction networks with different directional performances. First, to in-situ construct an isotropic percolated conduction network, with spherical cores as support materials, we developed a confined-growth technique for CNT-core sea urchin (CNTSU) materials. With 21.0 wt.% CNTSU loading, the thermal conductivity of composites reached 1.43 ± 0.13 W/(m·K). Secondly, with aligned hexagonal boron nitride (hBN) as an anisotropic support, we constructed CNT-hBN aligned networks by in-situ CNT growth, which improved the utilization efficiency of high density hBN and reduced the thermal interface resistance between matrix and fillers. With ~ 8.5 wt.% loading, the composites possess thermal conductivity up to 0.86 ± 0.14 W/(m·K), 374% of that for neat matrix. Due to the uniformity of CNTs in hBN network, the synergistic thermal enhancement from one-dimensional (1D) + two-dimensional (2D) hybrid materials becomes more distinct. Based on the detailed experimental evidence, the importance of purposeful production of a uniformly interconnected heat conduction 3D network with desired directional performance can be observed, particularly compared with the traditional direct-mixing method. This study opens new possibilities for the preparation of high-power-density electronics packaging and interfacial materials when both directional thermal performance and complex composite geometry are simultaneously required.

Tailoring carbon nanotube density for modulating electro-to-heat conversion in phase change composites.

Fabrication of Three-dimensional Thermally Conductive Carbon Fibers/Carbon Nanotubes Network Reinforce Epoxy Composites

The Carbon Nanotube Based Nanocomposite with Enhanced Thermal Conductivity

Construction of Three-Dimensional Network Structure in Polyethylene-EPDM-Based Phase Change Materials by Carbon Nanotube with Enhanced Thermal Conductivity, Mechanical Property and Photo-Thermal Conversion Performance

Cooperative In Situ Impregnation of PEG and Au Nanoparticles into Expanded CNT Network Toward Composite Phase Change Fibers with High Storage Capacity and Photothermal Conversion

Processing of Composite Electrodes of Carbon Nanotube Fabrics and Inorganic Matrices via Rapid Joule Heating

Electro- and Photodriven Phase Change Composites Based on Wax-Infiltrated Carbon Nanotube Sponges.

Tailored carbon-based aramid nanofiber nanocomposites with highly anisotropic thermal conductivity and superior mechanical properties for thermal management

Wire-sheet assembly construction of boron nitride/single-walled carbon nanotube shape-stabilized phase change composites for light-thermal energy conversion and storage

Hydrophilicity regulation of carbon nanotubes as phase-change materials for thermal energy storage

Room Temperature Electrical and Thermal Switching CNT/Hexadecane Composites

Crystallization induced realignment of carbon fibers in a phase change material to achieve exceptional thermal transportation properties

Enhanced composite thermal conductivity by percolated networks of in-situ confined-grown carbon nanotubes

Bridging boron nitride nanosheets with oriented carbon nanotubes by electrospinning for the fabrication of thermal conductivity enhanced flexible nanocomposites

A reliable and highly conductive carbon nanotube/thermoplastic polyurethane composite with an enhanced segregated structure for electrically driven heater applications

Green, recyclable and high latent heat form-stable phase change composites supported by cellulose nanofibers for thermal energy management

Crack-free and Scalable Transfer of Carbon Nanotube Arrays into Flexible and Highly Thermal Conductive Composite Film.

Ultralight and Flexible Carbon Foam-Based Phase Change Composites with High Latent-Heat Capacity and Photothermal Conversion Capability

Enhanced light-to-thermal conversion performance of self-assembly carbon nanotube/graphene-interconnected phase change materials for thermal-electric device

Thermal Interface Engineering in a 3D-Structured Carbon Framework for a Phase-Change Composite with High Thermal Conductivity

Polyurethane-based Flexible and Conductive Phase Change Composites for Energy Conversion and Storage