Abstract:Thermal conductive shape‐stabilized composite phase change materials (PCMs) were produced using polyacrylic acid (PAA), dodecanol (DDA) and carbon nanofiber (CNF) by solution blending route. In the composites, DDA was used as the material with latent heat thermal energy storage (LHTES) capability and PAA was introduced as the main supporter and shape stabilizer material for DDA. CNF was employed for two reasons: (i) to enrich the heat‐storing/releasing rate of the polymer‐based composite as the conductive nanofillers and (ii) to contribute to increasing the DDA adsorption rate in the shape‐stabilized composites. In this regard, a series of LHTES materials were presented, comprising of PAA/DDA composite, and PAA/DDA composite PCMs doped with CNF of 4 and 10 wt%. Composite PCMs exhibited well shape stabilization performance even with a high amount of DDA (70 wt%) due to both the cross‐linked spatial structure of PAA and the uniform dispersion of CNF in the composite. Fourier transform infrared spectroscopy and X‐ray diffraction findings indicated that there was no chemical bonding in PAA/DDA or PAA/DDA/CNF composites. DSC analysis revealed the highly favourable LHTES properties of the PAA/DDA(70 wt%)/CNF(10 wt%) composite, melting at 18.04°C and having a phase change enthalpy as high as 157.03 J/g. The thermal gravimetric analysis results showed that this composite had excellent thermal resistance to mass degradation up to 125°C. Thermal conductivity measurements indicated the significant effect of the CNF doping on the increment of the thermal conductivity of the PAA/DDA composite. All test results suggest that especially shape‐stabilized PAA/DDA/CNF composite PCM can be evaluated as energy‐saving materials for thermal management of buildings. DSC analysis revealed the highly favorable LHTES properties of the PAA/DDA(70 wt%)/CNF(10 wt%) composite as melting at 18.04°C and having a phase change enthalpy as high as 157.03 J/g. PAA/DDA(70 wt%)/CNF(10 wt%) composite had an excellent thermal resistance. CNF doping lead to a significant increment in the thermal conductivity of the PAA/DDA composite. All test results suggest that especially shape‐stabilized PAA/DDA/CNF composite PCM can be evaluated as energy‐saving materials for thermal management of buildings.

Crystallization induced realignment of carbon fibers in a phase change material to achieve exceptional thermal transportation properties

A molecular dynamics study of the effects of crystalline structure transition on the thermal conductivity of pentaerythritol as a solid-solid phase change material

Thermal Interface Engineering in a 3D-Structured Carbon Framework for a Phase-Change Composite with High Thermal Conductivity

Tailoring carbon nanotube density for modulating electro-to-heat conversion in phase change composites.

van der Waals-bonded graphene clusters enhance thermal conductivity of phase-change materials for advanced thermal energy management

Confined Crystallization Polyether-Based Flexible Phase Change Film for Thermal Management

Molecular Regulation of Flexible Composite Solid-Solid Phase Change Materials with Controllable Isotropic Thermal Conductivity for Thermal Energy Storage

Encapsulation and thermal properties of composite phase change materials based on cobalt/nitrogen double-doped ZIF-67 derived carbon

Microstructure and thermal properties of cetyl alcohol/high density polyethylene composite phase change materials with carbon fiber as shape-stabilized thermal storage materials

Thermal performance of phase change materials with anisotropic carbon fiber inserts

Directional fiber framework wrapped by graphene flakes for supporting phase change material with fast thermal energy storage properties

Phase change composites with ultra-high through-plane thermal conductivity achieved by vertically-aligned graphite film and double-shelled microcapsules

Thermally-induced flexible composite phase change material with enhanced thermal conductivity

Phase-Engineered VO 2 Metal Nanofiber Enables a Metal-Insulator Transition for Bidirectional Thermal Reallocation

Thermal energy storage characteristics of polyacrylic acid/dodecanol/carbon nanofiber composites as thermal conductive shape‐stabilized composite phase change materials

Cooperative In Situ Impregnation of PEG and Au Nanoparticles into Expanded CNT Network Toward Composite Phase Change Fibers with High Storage Capacity and Photothermal Conversion

A shape-stable capric acid @ porous carbon phase change composite with multifunctional response

Ultralight and Flexible Carbon Foam-Based Phase Change Composites with High Latent-Heat Capacity and Photothermal Conversion Capability

Novel design and fabrication of form-stable cellulose nanofiber-based phase change composites via click chemistry, coordination reaction, and solvent exchange

The positive role of mesophase-pitch-based carbon fibers in enhancing thermal response behavior in Carbon/Carbon composites

Enhanced thermal conductivity and reduced thermal resistance in carbon fiber-based thermal interface materials with vertically aligned structure