Abstract:A high damping rubber bearing (HDRB) is widely utilized in base-isolation structures due to its good energy dissipation capacity and environmentally friendly properties; however, it is incapable of isolating the vertical vibration caused by earthquakes and subways effectively. Thick rubber bearings with a low shape factor have become one of the important vertical isolation forms. This paper provides an experimental comparative study on high damping rubber bearings with low shape factor (HDRB-LSF), thick lead–rubber bearings (TLRB), and lead–rubber bearings (LRB). The abilities of the bearing and energy dissipation of the above bearings are analyzed contrastively considering the influence of vertical pressure, loading frequency, shear strain, and pre-pressure. Firstly, the HDRB-LSF, TLRB, and LRB are designed according to the Chinese Code for seismic design of buildings. Secondly, cyclic vertical compression tests and horizontal shear tests, as well as their correlation tests, are conducted, respectively. The vibrational characteristics and hysteresis feature of these three bearings are critically compared. Thirdly, a corrected calculation of vertical stiffness for the thick rubber bearings is proposed based on the experimental data to provide a more accurate and realistic tool measuring the vertical mechanical properties of rubber bearings. The test results proved that the HDRB-LSF has the most advanced performance of the three bearings. For the fatigue property, the hysteresis curves of the HDRB-LSF along with TLRB are plump both horizontally and vertically, thus providing a good energy dissipation effect. Regarding vertical stiffness, results from different loading cases show that the designed HDRB-LSF possesses a better vertical isolation effect and preferable environmental protection than LRB, a larger bearing capacity, and, similarly, a more environmentally friendly property than TLRB. Hence, it can avoid the unfavorable resonance effect caused by vertical periodic coupling within the structure. All the experimental data find that the proposed corrected equation can calculate the vertical stiffness of bearings with a higher accuracy. This paper presents the results of an analytical, parametric study that aimed to further explore the low shape factor concepts of rubber bearings applied in three-dimensional isolation for building structures.

The Influence of Low Temperature on the Performance of Lead Rubber Bearing and the Isolation Effect of Bridge

Earthquake Response of Bridge Restrainers Considering Failure of Bearings

An experimental study on the temperature dependency for horizontal shear performance of 300 × 300 square lead–rubber bridge bearing

Earthquake response of bridges bearing on flexible rubber considering pounding of girders

Experimental Study of the Mechanical Properties of Full-Scale Rubber Bearings at 23 °C, 0 °C, and −20 °C

Study on the damping efficiency of continuous beam bridge with constant cross-section applied by lead rubber bearings and fluid viscous dampers

Mechanical Properties and Seismic Loss Assessment of Improved Isolation Bearing with Variable Stiffness

SEISMIC DESIGN METHOD OF SMALL AND MEDIUM SPAN BRIDGE CONSIDERING BEARING FRICTION SLIPPING

Study on the Performance Degradation of LRB Under the Combination of Low Temperature Cycles and Superstructure Weight

Behavior of high damping seismic isolation rubber bearings for bridges

An Experimental Study on the Mechanical Properties of a High Damping Rubber Bearing with Low Shape Factor

Effect of bonding or unbonding on seismic behavior of bridge elastomeric bearings: lessons learned from past earthquakes in China and Japan and inspirations for future design

Seismic Vulnerability Analysis of Concrete-Filled Steel Tube Tied Arch Bridges Using Symmetrically Arranged High-Damping Rubber Bearings

Problems in Chinese Highway Bridge Seismic Specifications and Suggestions for Improvement

Lead-rubber-bearing with negative stiffness springs (LRB-NS) for base-isolation seismic design of resilient bridges: A theoretical feasibility study

Influence of ground motion characteristics on the heating effect of lead‐rubber bearings in base‐isolated structures

Yielding Steel Dampers as Restraining Devices to Control Seismic Sliding of Laminated Rubber Bearings for Highway Bridges: Analytical and Experimental Study

Full-Scale Tests and Analytical Model of the Teflon-Based Lead Rubber Isolation Bearings

Bearing characteristic of static drill rooted pile considering condition of energy carrier

Research on earthquake-reduction design method of continuous girder bridges in a high-intensity earthquake area

Modifications in both lead and rubber properties of LRBs at low temperatures considering the size effect