Abstract:Geothermal energy pile is the new pile technology that combines the ground source heat pump technology and building pile foundation. Due to the pile as the heat transfer carrier of ground source heat pumps, the bearing characteristics of energy piles are different from those of the conventional engineering piles because of thermo-mechanical coupling. In-situ thermo-mechanical tests on drilled friction geothermal energy piles of a Kunshan project are performed. The temperature, stress distribution of pile shaft and displacement of pile tip are investigated under multi-level loadings and heat exchange cases. The distribution curves of temperature-induced loading, axial force and friction resistance of pile shaft are obtained, and the thermo-mechanical bearing properties and load transfer characteristics of drilled friction energy piles are analyzed. The results indicate that the additional temperature loading is induced in energy pile shaft by temperature change. The characteristics of axial force and the temperature-induced loading of energy piles are affected by pile loading and constraint of pile toe. The bearing properties of the energy piles is not the same with that of the engineering piles by loading only. Under heating condition, the negative friction resistance of pile shaft is produced at the upper and middle parts of pile, but the effect of negative friction resistance decreases by the increasing loading. While under cooling condition, the negative friction resistance of pile shaft is produced near the pile toes. So the load transfer characteristics of energy piles are changed by the thermo-mechanical coupling effect. Under the design working loading, the head of energy piles is uplift under heating case and dropped under cooling case. The displacement of energy pile head at heating process is almost restored after temperature is recovered, but the temperature-induced settlement of energy piles at coolingprocess remains after cooled. So the settlement characteristics of energy piles are changed by the thermo- mechanical coupling effect.

Bearing characteristic of static drill rooted pile considering condition of energy carrier

Model Test on Bearing Characteristic of Static Drill Rooted Energy Pile

Performance of Static Drill Rooted Nodular Piles under Compression

Bearing Capacity And Load Transfer Mechanism Of Static Drill Rooted Nodular Piles

A test on base bearing capacity of static drill rooted nodular pile

Bearing Capacity and Load Transfer Mechanism of a Static Drill Rooted Nodular Pile in Soft Soil Areas

A Model Test on the Behavior of A Static Drill Rooted Nodular Pile under Compression

Study on Bearing Behavior of Pure-friction Long Pile in Soft Clay

Model Test Study of Bearing Behavior of Small Prefabricated Piles in Soft Soil Area

Field Tests and Simplified Calculation Method for Static Drill Rooted Nodular Pile

Model Tests on the Bearing Capacity of Precast Open-Ended Micro Pipe Piles in Soft Soil

STUDY ON VERTICAL BEARING CAPACITY OF LARGE-DIAMETER CAST-IN-SITU THIN-WALL TUBULAR PILE

Influence of Thermal Loading on Bearing Capacity of Geothermal Energy Piles

Bearing Performance of Geothermal Energy Pile Subjected to Thermal Loading

RESEARCH ON INFLUENCE OF SOIL CORE ON BEARING CHARACTER OF LARGE-DIAMETER TUBULAR PILE USING CAST-IN-SITU CONCRETE

In-situ tests and thermo-mechanical bearing characteristics of friction geothermal energy piles

FEM Analysis and Simplified Approach for a Single Energy Pile Subjected to Thermomechanical Loads

Laboratory tests on the frictional capacity of core pile - cemented soil interface

A Field Study on the Behavior of Static Drill Rooted Nodular Piles with Caps under Compression

Technology and application of static drilling rooted geothermal energy pile

Model Test on Load Transfer Mechanism of a Static Drill Rooted Nodular Pile