Influence of speeds of forming movements on the properties of geometric topology of the part in longitudinal turning

V.L. Zakovorotnyi,V.E. Gvindjiliya

DOI: https://doi.org/10.1016/j.jmapro.2024.01.037

IF: 5.684

2024-01-22

Journal of Manufacturing Processes

Abstract:Modern metal-cutting machine tools make it possible to ensure with high accuracy that the trajectories of motion of the actuating elements correspond to the program represented in the CNC computer. Their high accuracy does not guarantee the accuracy of the workpiece production. This is largely due to the deformations of the tool relative to the workpiece. Therefore, when building a CNC program, it is necessary to take into account their influence on the part geometry. For this purpose, it is necessary to reveal the regularities of transformation of trajectories defined by the CNC system into trajectories of forming movements, additionally considering deformation displacements, and trajectories of forming motions into geometrical topology of the part. In the paper, the known models of the dynamic cutting system are used to solve this problem, which are supplemented by nonlinear couplings important for the determination of deformation trajectories. In particular, the dynamic coupling is considered in the form of dependence of forces acting on the tool not only on deformations, but also on the velocities of forming motions. It is taken into account that strain rates in the direction of cutting speed form positive feedback. It not only promotes self-excitation, but also leads to the formation of super low-frequency strain sets of complex structure, which have not been investigated before. The forces formed in the contact of the back face of the tool with the workpiece are also considered. Compared to the previous studies, this paper considers all the properties of the dynamic system from the angle of their influence on the workpiece.

engineering, manufacturing