Preparation of Long Persistent SrO×2Al2O3 Ceramics and Their Luminescent Properties.

Chengkang Chang,Da-Li Mao,Jianfeng Shen,Chuanli Feng

DOI: https://doi.org/10.1002/chin.200314012

2003-01-01

ChemInform

Abstract:For Abstract see ChemInform Abstract in Full Text.

What problem does this paper attempt to address?

Photoluminescence of 4SrO·7Al2O3 ceramics sintered with the aid of B2O3

C.K Chang,L Jiang,D.L Mao,C.L Feng

DOI: https://doi.org/10.1016/S0272-8842(03)00101-9

IF: 5.532

2004-01-01

Ceramics International

Abstract:4SrO·7Al2O3 long persistent ceramics with different B2O3 contents prepared by sintering were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM) and photoluminescence spectrum (PLS). The ceramics showed a two peak emission at 400 and 486 nm, due to the different lattice sites Eu2+ ions held in the 4SrO·7Al2O3 lattice. B2O3 plays several different roles in the ceramics. In the synthesis process, it greatly promotes the formation of 4SrO·7Al2O3 phosphor and helps to form dense ceramics at 1400 °C. Furthermore, with the addition of B2O3, the emission peaks shifted to the short wavelength side due to lattice contraction. The afterglow characteristics result from the emission at 486 nm other than the emission at 400 nm. The duration of the phosphor was enhanced by the addition of B2O3, due to the trap center formed in the 4SrO·7Al2O3 host.
Preparation of long-afterglow Sr4Al14O25-based luminescent material and its optical properties

Yuanhua Lin,Zilong Tang,Zhongtai Zhang

DOI: https://doi.org/10.1016/s0167-577x(01)00257-9

IF: 3

2001-10-01

Materials Letters

Abstract:Sr4Al14O25–Eu,Dy photoluminescent material with high brightness and long afterglow was prepared by sintering at high-temperature and weak-reducing atmosphere. The luminescent properties of Sr4Al14O25-based luminescent materials have been studied systematically. The analytical results indicated that the emission spectra of Sr4Al14O25–Eu,Dy are similar to that of Sr4Al14O25–Eu. Both of them have two main peaks near 424 and 486 nm, respectively, which are ascribed to two types of Eu2+ that existed in the Sr4Al14O25 matrix crystal. However, the Sr4Al14O25–Eu phosphor does not have the long-afterglow phenomenon; the Sr4Al14O25–Eu,Dy showed the obvious long afterglow. As for the mechanism of the long afterglow of this phosphor, Dy3+ acted as the trap level and captured the free holes in the system. It is the trapped–detrapped recombination process that resulted in the long-afterglow phenomenon of this phosphor.

materials science, multidisciplinary,physics, applied
Synthesis, structure, and luminescence properties of SrSiAl2O3N2:Eu2+ phosphors for light-emitting devices and field emission displays

Xicheng Wang,Zhengyan Zhao,Jianyan Ding,Yanyan Li,Chuang Wang,Aijun Mao,Yuhua Wang

DOI: https://doi.org/10.1039/c5dt00800j

IF: 4

2015-01-01

Dalton Transactions

Abstract:A series of SrSiAl2O3N2:Eu(2+) (0.005 ≤x≤ 0.05) phosphors were successfully synthesized through a pressureless, facile, and efficient solid state route. The crystal structure, band structure, and their photoluminescence and cathodoluminescence properties were investigated in detail. The phosphors exhibit rod shape morphology with a uniform Eu(2+) distribution. Under n-UV excitation the emission spectra shift from 477 to 497 nm with an increase of Eu(2+) concentration. The concentration quenching mechanism of Eu(2+) emission was dominated by the dipole-dipole interaction. The thermal stability is comparable to that of the commercial Ba2SiO4:Eu(2+) phosphor. The phosphor also exhibits high current saturation and high resistance under low voltage electron bombardment. All the results indicate that the SrSiAl2O3N2:Eu(2+) phosphors can be considered as candidates for application in both white LEDs and FEDs.
Facile synthesis of monodisperse SrAl2O4:Eu2+ cage-like microspheres with an excellent luminescence quantum yield

Jun Wan,Yuting Zhang,Yuan Wang,Ronghua Ma,Yimin Wu,Xvsheng Qiao,Xianping Fan

DOI: https://doi.org/10.1039/c7tc05203k

IF: 6.4

2018-01-01

Journal of Materials Chemistry C

Abstract:SrAl2O4:Eu2+ cage-like microspheres are prepared by a sol–gel route and subsequent heat treatment. The optimum quantum yield of the cage-like microspheres is 94.94%.
Fabrication and characterizations of Eu2+‐Dy3+ co‐doped SrAl2O4 ceramics with persistent luminescence

Tingsong Li,Qiang Liu,Danyang Zhu,Penghui Chen,Yanqiu Jing,Junlin Wu,Haohong Chen,Dariusz Hreniak,Martin Nikl,Jiang Li

DOI: https://doi.org/10.1111/jace.19215

IF: 4.186

2023-06-01

Journal of the American Ceramic Society

Abstract:(Sr0.97Eu0.01Dy0.02)Al2O4 persistent luminescence (PersL) ceramics were fabricated by solid‐state reactive sintering in vacuum combined with hot isostatic pressing (HIP) using H3BO3 as sintering additive. The phase composition, microstructure, luminescence properties, trap state, and PersL performance of HIP post‐treated (Sr0.97Eu0.01Dy0.02)Al2O4 PersL ceramics were discussed. For the (Sr0.97Eu0.01Dy0.02)Al2O4 PersL ceramics after HIP post‐treatment, the initial luminescence intensity of the ceramics reached over 6400 mcd/m2 with a simulated daylight irradiation of 1000 lx for 5 min, and the persistent emission decay time > 17 h. This is much better than the SrAl2O4:Eu2+,Dy3+ PersL powders and the other luminescent ceramics. In addition, this method is a solid‐state reactive sintering method for synthesizing ceramics, which has the advantages of low cost and simple operation, and is suitable for large‐scale, high‐volume industrial production. This article is protected by copyright. All rights reserved

materials science, ceramics
Preperation and Photoluminescent Properties of Ca2AlSi3O2N5:Sm3+ Phosphor

Wan Jun,Wang Fang,Wu Li'ang,Wu Yimin,Qiao Xvsheng,Fan Xianping

2016-01-01

Rare Metal Materials and Engineering

Abstract:Ca2AlSi3O2N5:Sm3+ phosphor was prepared by a combination of in-situ co-precipitation method with a gas-reduction-nitridation method at 1100 degrees C. Its structure and luminescent properties were investigated with XRD and PL. The emission spectrum of Ca2AlSi3O2N5:Sm3+ shows several pesks at 602 nm ((4)G(5/2) -> H-6(7/2)), and 650 nm ((4)G(5/2) -> H-6(9/2)) under 287 nm excitation. The effect of the doping concentration of Sm3+ activator on the luminescence properties was studied. It is found that the luminescence intensity increases with increasing of Sm3+ doping concentration within limits, and then decreases. The photoluminescence intensity reaches the highest when the Sm3+ doping concentration is 1 mol%.
Luminescent properties of SrMgAl10 O17∶Eu2+,Mn2+ high-efficiency phosphor prepared via the sol-gel combustion method

Hong ZHANG,Le WANG,Yanghui LI,Feng JIAO,Pei LIANG,Changyu SHEN,Ye SHEN

DOI: https://doi.org/10.3969/ji.ssn1.001-97312.0151.70.14

2015-01-01

Abstract:A phase‐pure and high‐efficiency double‐band phosphor ,Eu2+‐Mn2+ co‐doped SrMgAl10 O17 (SAM ) was prepared through the sol‐gel combustion method .The crystal structure and luminescent properties of the SAM were investigated .The XRD results showed that SAM :Eu2+ ,Mn2+ phosphors were well‐crystallized , and the SEM results indicated that these powders consisted of well‐dispersed and uniform particles (about 1μm in length) .With the increase of Mn2+ concentration ,the emission spectrum displayed double peaks centered at 465 and 515 nm ,respectively .The energy transfer mechanism was proposed to be the dipole‐quadrupole interac‐tion .Moreover ,the Mn2+‐codoped sample had the higher thermal stability than that of the sample solely doped with Eu2+ .
Eu2+ Activated Long Persistent Strontium Aluminate Nano Scaled Phosphor Prepared by Precipitation Method

CK Chang,ZX Yuan,DL Mao

DOI: https://doi.org/10.1016/j.jallcom.2005.04.219

IF: 6.2

2006-01-01

Journal of Alloys and Compounds

Abstract:This paper reports the detailed preparation process of Eu2+ activated long lasting Sr4Al14O25 nano sized phosphor by precipitation method. Scanning electron microscopy (SEM), simultaneous DSC–TG, X-ray diffraction (XRD), photo luminescent spectroscope (PLS) and thermal luminescent (TL) spectroscope were employed to characterize the phosphor. SrAl2O4:Eu2+Dy3+ and Sr4Al14O25:Eu2+Dy3+ phosphors in nano scale were obtained by calcinating the precipitated precursor at 1200 and 1300°C, respectively. Both the low-temperature product SrAl2O4:Eu2+Dy3+ and the high-temperature product Sr4Al14O25:Eu2+Dy3+ showed photoluminescence upon UV illumination with an emission peak at 480 and 505nm, respectively. When compared to the powder obtained in conventional method, the nano sized powders revealed a blue shift in emission spectrum due to the decrease in grain size. Those two phosphors showed long persistent afterglow, and the Sr4Al14O25:Eu2+Dy3+ phosphor exhibited better afterglow property than SrAl2O4:Eu2+Dy3+ phosphor due to a deeper trap level and a higher trap concentration formed in the host material.
PREPARATION OF ULTRAFINE SrAl_O_4-BASED LUMINESCENT MATERIAL DOPED WITH RARE EARTH IONS AND THEIR OPTICAL PROPERTIES

Lin Yuanhua

2002-01-01

Abstract:Ultrafine phosphorescent SrAl2O4:'Eu,Dy powders with high brightness and long duration have been prepared by a novelmethod-gel synthesis, and their optical properties were studied systematically and compared with those of prepared by solid statereaction method. A clear blue shift occurs in the excitation and emission spectra of the nano SrAl2O4: Eu, Dy materials (λex: 320 nm→304 nm, 360 nm→323 nm,λem: 520 nm→500 nm). The curves of after-glow decays indicate that the decay speed of the phosphors particles prepared by the gel synthesis method was faster than that of prepared by the solid state reaction method, and the decay was characterized by fast-decay and slow-decay processes. The blue shift and the change of luminescent intensity can be attributed to the quantum-size-effect of the phosphor particles.
New Preparation Process of Long Afterglow Phosphor Eu and Dy Co-doped SrAl2O4

Jin HU,Jia-lin SUN,Jian-liang LIU,An SHI,Mao XU,Qin-qin GAO

DOI: https://doi.org/10.3321/j.issn:1000-7032.2006.02.008

2006-01-01

Chinese Journal of Luminescence

Abstract:The activated Al-Sr alloy powder was put immediately into boiling pure water,with liquid-solid(ratio) of 4 ∶1.The system was kept isothermal and stirred until white hydrolysates appears.The hydrolysates contain the mixture of Sr(OH)_2·8H_2O and Al(OH)_3 in main,included a little Al(OH)_3,AlOOH,SrCO_3,and 3SrO·Al_2O_3· 6H_2O.After heat treatment at 700 ℃ for 1 h,the mixture of SrO and α-Al_2O_3,γ-Al_2O_3 were formed.As a precursor,the hydrolysates after heat treatment had been used to prepare long after phosphor Eu,Dy co-doped SrAl_2O_4 at 1 300 ℃ for 1 h.The crystal structure of hydrolysates and Eu,Dy co-doped SrAl_2O_4 were analyzed by XRD.The luminescent properties of long afterglow material were studied.The(results) showed that the crystal structure of phosphor is β phase SrAl_2O_4,the emission spectra of Eu and Dy co-doped SrAl_2O_4 lied near 520 nm,resulted from the character transition of 4f5d-4f of Eu~(2+) ion.The method can improve afterglow properties dramatically.The initial luminescent intensity of long afterglow material reached 18 cd/m~2,and the duration time lasted 46 h.The improved properties are related to precipitation mechanism of AlSr alloy hydrolysates.With this procedure,SrO and Al_2O_3 will disperse evenly to effectively enlarge the contact area of the components,shorten the diffusive distance.As a result the sintering temperature could be decreased,while the reaction speed and the long afterglow fluorescent properties of the materials could be improved.
Facile Synthesis of Monodisperse SrAl2O4:Eu2+ Cage-Like Microspheres with an Excellent Luminescence Quantum Yield

Jun Wan,Yuting Zhang,Yuan Wang,Ronghua Ma,Yimin Wu,Xvsheng Qiao,Xianping Fan

DOI: https://doi.org/10.1039/c7tc05203k

IF: 6.4

2018-01-01

Journal of Materials Chemistry C

Abstract:SrAl2O4:Eu2+ cage-like microspheres are prepared by a sol–gel route and subsequent heat treatment. The optimum quantum yield of the cage-like microspheres is 94.94%.
PREPARATION OF ULTRAFINE SrAl2O4-BASED LUMINESCENT MATERIAL DOPED WITH RARE EARTH IONS AND THEIR OPTICAL PROPERTIES

赵淑金,林元华,张中太,张枫,南策文

DOI: https://doi.org/10.3321/j.issn:0454-5648.2002.06.021

2002-01-01

Abstract:Ultrafine phosphorescent SrAl2O4:'Eu,Dy powders with high brightness and long duration have been prepared by a novelmethod-gel synthesis, and their optical properties were studied systematically and compared with those of prepared by solid statereaction method. A clear blue shift occurs in the excitation and emission spectra of the nano SrAl2O4: Eu, Dy materials (λex: 320 nm→304 nm, 360 nm→323 nm,λem: 520 nm→500 nm). The curves of after-glow decays indicate that the decay speed of the phosphors particles prepared by the gel synthesis method was faster than that of prepared by the solid state reaction method, and the decay was characterized by fast-decay and slow-decay processes. The blue shift and the change of luminescent intensity can be attributed to the quantum-size-effect of the phosphor particles.
Photoluminescence and Electrical Properties of SrSmAlO4-doped (bi0.5na0.5)0.935ba0.065tio3 Ferroelectric Ceramics

Cen Liang,Jigong Hao,Wei Li,Juan Du,Peng Fu,Chengchao Hu,Huaiyong Li,Zhijun Xu,Ruiqing Chu

DOI: https://doi.org/10.1016/j.ceramint.2018.11.201

IF: 5.532

2018-01-01

Ceramics International

Abstract:(1-x) (Bi0.5Na0.5)(0.935)Ba0.065TiO3-xSrSmAlO(4) (BNBT6.5-xSrSmAlO(4)) lead-free ceramics were prepared through the solid reaction sintering method. The phase structure, electrical and photoluminescence properties of the ceramics were systematically studied. Substitution with SrSmAlO4 induced the transition of coexisting ferroelectric rhombohedral-tetragonal phases to the relaxor pseudocubic phase. This transition was accompanied by the drastic disruption of ferroelectric order and the enhancement of electric-field-induced strain. The BNBT6.5-xSrSmAlO(4) ceramics prepared with the dopant concentration of x = 0.012 exhibited a large unipolar strain of 0.41% and a correspondingly large signal piezoelectric d(33)(star) constant (= S-max/E-max of 512 pm/V. Moreover, the SrSmAlO4-modified ceramics prepared in this work exhibited strong orange red emission upon excitation with blue light. The emission intensities of the ceramics were dependent on dopant concentration. The ceramic with the dopant concentration of x = 0.012 demonstrated the strongest emission. It also showed a weak green emission peak at 564 nm that corresponded to the (4)G(5/2) -> H-6(5/2) transition and two strong red emission peaks at 599 and 646 nm that corresponded to the (4)G(5/2) -> H-6(7/2) and (4)G(5/2) -> H-6(9/2) transitions, respectively. These results suggested that the BNBT6.5-xSrSmAlO(4) system has multifunctional characteristics and considerable potential applications in novel devices with multiple functions given its excellent integrated luminescence and electrical properties.
Preparing, Characterizing, and Investigating Luminescent Properties of a Series of Long-Lasting Phosphors in a SrO–Al2O3 System: An Integrated and Inquiry-Based Experiment in Solid State Chemistry for the Undergraduate Laboratory

Yan-Zi Ma,Li Jia,Kai-Guo Ma,Hai-Hong Wang,Xi-Ping Jing

DOI: https://doi.org/10.1021/acs.jchemed.6b00211

IF: 3.208

2017-01-01

Journal of Chemical Education

Abstract:An integrated and inquiry-based experiment on solid state chemistry is applied to an inorganic chemistry lab course to provide insight into the characteristics of the solid phase reaction. In this experiment, students have the opportunity to synthesize long-lasting phosphors with formula xSrO center dot yAl(2)O(3):Eu2+, Dy3+, by means of precipitation and high temperature methods, and to characterize them by powder X-ray diffractometry. The luminescent properties of the phosphors are also suitable for investigation by student research teams with the assistance of solid fluorescence analysis. With a change in the Sr/Al ratio of strontium aluminates, the phosphors show distinct emission bands, and with a change in the content of Dy in a certain range, the different data of luminescence intensity and decay time can be obtained. By analyzing the crystal structures and photoluminescence mechanism of products, students can better understand abstract concepts of luminescent solid materials, including nonstoichiometric compounds, extrinsic point defects, crystalline fields in the solid state, band levels, and hole and electron transfer.
Preparation and Research of Long Afterglow Luminescent Materials

Wen-feng Xu,Xue Zhang,Ling Zhang,Shan-quan Jiang

DOI: https://doi.org/10.4028/www.scientific.net/amm.320.123

2013-01-01

Applied Mechanics and Materials

Abstract:In this paper, sol-gel method at low temperatures, an atmosphere of carbon reduction to replace the use of cyclodextrin system prepared with citric acid as SrAl2O4: Eu2+, Dy3+ Long Afterglow Phosphors nanotechnology. And the use of X-ray diffraction phase identification and fluorescence spectrophotometer with the excitation spectrum of the sample, luminescence spectra and luminescence afterglow to explore research, results show that product with the lower cost has the luminescence properties.
Eu2+ Activated Long Persistent Strontium Aluminate Nano Scaled Phosphor Prepared by Precipitation Method.

Chengkang Chang,Zhaoxin Yuan,Dali Mao

DOI: https://doi.org/10.1002/chin.200631011

2006-01-01

ChemInform

Abstract:AbstractChemInform is a weekly Abstracting Service, delivering concise information at a glance that was extracted from about 200 leading journals. To access a ChemInform Abstract, please click on HTML or PDF.
A New Long Persistent Blue-Emitting Sr2ZnSi2O7:Eu2+, Dy3+ Prepared by Sol–gel Method

L Jiang,CK Chang,DL Mao,B Zhang

DOI: https://doi.org/10.1016/j.matlet.2003.11.014

IF: 3

2004-01-01

Materials Letters

Abstract:This paper reports the detailed preparation and long lasting properties of Eu2+-activated Sr2ZnSi2O7 phosphor by sol–gel method. The preparation process of Sr2ZnSi2O7 was complicated and several intermediate phases were formed during the reaction process. The obtained phosphor showed two emission peaks at 385 and 457 nm, and they were due to the different Eu2+ luminescent centers in Sr2ZnSi2O7 host. Long afterglow was observed although the phosphor showed faint persistence. Investigation of thermoluminescence curve revealed one TL glow peak, which indicated the existence of the trap. The lifetime of the trap was calculated to be 212 s, which illustrated the faint afterglow.
Preparation Technology of Sr_2MgSi_2O_7∶Eu~(2+),Dy~(3+) Luminous Materials and Their Luminous Performance

Qi Xiaoxia,Zhao Junwu,Feng Yi

2006-01-01

Abstract:The Sr2MgSi2O7∶Eu2+,Dy3+ luminous materials were synthesized by solid sintering technology at the presence of carbon as reductant.The factors that influence the luminous performance and preparation technology were discussed.These luminous materials exhibited broadband peaks in both the excitation and emission spectra.The excitation peaks lied between 220 and 450 nm,and the main emission peaks lied around 463 nm.The results indicate that the luminescence of these materials are due to 4f7(8S7/2)-4f65d transition of Eu2+.Additionally,the long afterglow of the Sr2MgSi2O7∶Eu2+,Dy3+ luminous materials can last over 10 h in the light perception of the human eye.Its luminescence decay consisted of the initial fast process and the later extremely slow process.Effects of such factors as the temperature in the sintering process,different proportions of Eu/Dy and different additions of boracic acid on the relative luminescent intensity were studied.
Luminescence of Long-Lasting CaAl2O4:Eu2+,Nd3+ Phosphor by Co-Precipitation Method

CK Chang,J Xu,L Jiang,DL Mao,WJ Ying

DOI: https://doi.org/10.1016/j.matchemphys.2005.09.069

IF: 4.778

2006-01-01

Materials Chemistry and Physics

Abstract:Long-lasting CaAl2O4:Eu2+,Nd3+ phosphor was prepared by co-precipitation method. CaAl2O4:Eu2+,Nd3+ single phased phosphor was achieved by calcining the as-precipitated precursor at 1150°C. Some other calcium aluminates, CaAl4O7 and Ca3Al2O6, were identified as the intermediate phase during the calcination process. The obtained phosphor showed a long afterglow peaking at 430nm, a slight blue shift due to the decrease in grain size. The obtained phosphor revealed a faint afterglow when compared to the phosphor prepared through solid reaction routine, which can be ascribed to the different traps formed by the co-doped Nd3+ ion within the CaAl2O4 host.
Luminescence and microstructural characteristics of Eu2O3-doped SrAl2O4 single crystals

Yuchen Lu,Long Chen,Qunyue Zhang,Bernard A. Goodman,Wen Deng,Dingkang Xiong,Shoulei Xu

DOI: https://doi.org/10.1016/j.jlumin.2022.119472

IF: 3.6

2023-01-01

Journal of Luminescence

Abstract:Single crystals of SrAl2O4 prepared with 0.2–2.0 mol% Eu2O3 were synthesized using the optical floating zone method using ceramic rods that had been prepared under reducing conditions to favor conversion of Eu3+ to Eu2+. Samples were then characterized by a combination of X-ray diffraction (XRD), X-ray photoelectron (XPS), positron annihilation, electron paramagnetic resonance (EPR), photoluminescence excitation (PLE) and photoluminescence (PL) spectroscopic techniques, and their excited state lifetimes were measured. XRD showed that the crystal samples were all in the monoclinic phase. EPR and PL techniques indicated that they contained Eu2+, although XPS indicated that the Eu3+ reduction was only ∼50%. Positron annihilation spectroscopy demonstrated that all of the samples contained a considerable number of defects that act as positron traps, and were influenced by the amount of Eu2O3 used in the crystal synthesis. These defects did not show an EPR signal, which suggests that they may correspond structural vacancies, possibly due to the presence of cation vacancies as a result of incorporation of some Eu3+ in the divalent cation sites. However, EPR did reveal a small amount of anionic paramagnetic defects, and showed a progressive broadening of the Eu2+ resonance for crystals synthesized with Eu2O3 concentrations >0.5 mol%. The intensity of the PLE spectra increased with Eu2O3 concentration, and the relative proportions of the peaks at 3.62 eV (360 nm) and 3.13 eV (417 nm) changed with Eu2O3 concentration. The PL spectra showed a broad green emission peak at 2.52 eV (518 nm), which is attributed to 4f65d-4f7 charge transfer transitions in Eu2+. Both its intensity and fluorescence decay time increased with Eu2O3 concentration, reached a maximum with the sample prepared with 1.5 mol% Eu2O3, then decreased with higher Eu2O3 concentrations.

optics

Preparation of Long Persistent SrO×2Al2O3 Ceramics and Their Luminescent Properties.

Photoluminescence of 4SrO·7Al2O3 ceramics sintered with the aid of B2O3

Preparation of long-afterglow Sr4Al14O25-based luminescent material and its optical properties

Synthesis, structure, and luminescence properties of SrSiAl<sub>2</sub>O<sub>3</sub>N<sub>2</sub>:Eu<sup>2+</sup> phosphors for light-emitting devices and field emission displays

Facile synthesis of monodisperse SrAl<sub>2</sub>O<sub>4</sub>:Eu<sup>2+</sup> cage-like microspheres with an excellent luminescence quantum yield

Fabrication and characterizations of Eu2+‐Dy3+ co‐doped SrAl2O4 ceramics with persistent luminescence

Preperation and Photoluminescent Properties of Ca2AlSi3O2N5:Sm3+ Phosphor

Luminescent properties of SrMgAl10 O17∶Eu2+,Mn2+ high-efficiency phosphor prepared via the sol-gel combustion method

Eu2+ Activated Long Persistent Strontium Aluminate Nano Scaled Phosphor Prepared by Precipitation Method

PREPARATION OF ULTRAFINE SrAl_O_4-BASED LUMINESCENT MATERIAL DOPED WITH RARE EARTH IONS AND THEIR OPTICAL PROPERTIES

New Preparation Process of Long Afterglow Phosphor Eu and Dy Co-doped SrAl2O4

Facile Synthesis of Monodisperse SrAl2O4:Eu2+ Cage-Like Microspheres with an Excellent Luminescence Quantum Yield

PREPARATION OF ULTRAFINE SrAl2O4-BASED LUMINESCENT MATERIAL DOPED WITH RARE EARTH IONS AND THEIR OPTICAL PROPERTIES

Photoluminescence and Electrical Properties of SrSmAlO4-doped (bi0.5na0.5)0.935ba0.065tio3 Ferroelectric Ceramics

Preparing, Characterizing, and Investigating Luminescent Properties of a Series of Long-Lasting Phosphors in a SrO–Al2O3 System: An Integrated and Inquiry-Based Experiment in Solid State Chemistry for the Undergraduate Laboratory

Preparation and Research of Long Afterglow Luminescent Materials

Eu2+ Activated Long Persistent Strontium Aluminate Nano Scaled Phosphor Prepared by Precipitation Method.

A New Long Persistent Blue-Emitting Sr2ZnSi2O7:Eu2+, Dy3+ Prepared by Sol–gel Method

Preparation Technology of Sr_2MgSi_2O_7∶Eu~(2+),Dy~(3+) Luminous Materials and Their Luminous Performance

Luminescence of Long-Lasting CaAl2O4:Eu2+,Nd3+ Phosphor by Co-Precipitation Method

Luminescence and microstructural characteristics of Eu2O3-doped SrAl2O4 single crystals