Abstract:The gas velocity distribution, sorbent particle concentration distribution and particle residence time in circulating fluidized bed (CFB) reactors for moderate temperature flue gas desulfurization (FGD) have significant influence on the desulfurization efficiency and the sorbent calcium conversion ratio for sulfur reaction. Experimental and numerical methods were used to investigate the influence of the key reactor structures, including the reactor outlet structure, internal structure, feed port and circulating port, on the gas velocity distribution, sorbent particle concentration distribution and particle residence time. Experimental results showed that the desulfurization efficiency increased 5-10% when the internal structure was added in the CFB reactor. Numerical analysis results showed that the particle residence time of the feed particles with the average diameter of 89 um and 9 um increased 40% and 17% respectively, and the particle residence time of the circulating particles with the average diameter of 116 urn increased 28% after reactor structure optimization. The particle concentration distribution also improved significantly, which was good for improving the contact efficiency between the sorbent particles and SO2. In addition, the optimization guidelines were proposed to further increase the desulfurization efficiency and the sorbent calcium conversion ratio.

Characterization and Modification of Inlet Configuration on Gas Flow in a Circulating Fluidized Bed Desulfurization Reactor

Optimizing Flow Field in an SCR System of a 600 MW Power Plant: Effects of Static Mixer Alignment Style

Modeling on circulating fluidized bed flue gas desulfurization

Structure Optimization Of Cfb Reactor For Moderate Temperature Fgd

Integrated Gas and Solid Model to Determine the Flow Performance in the SCR Reactor

Dominant influence parameters on the FGD efficiency and desulfurization mechanism in circulating fluidized bed in ambient temperature

CFD Simulation of Flow Field,temperature Field and SO2 Absorption in Flue Gas Quench Tower

Numerical Simulation of Moderate Temperature Desulfurization in Circulating Fluidized Bed Reactor Considering Sorbent Abrasion

STUDY ON NUMERICAL SIMULATION OF FLOW FIELD IN THE DENITRIFICATION REACTOR WITH GAS STRAIGHTENING GRATINGS

Experimental Study of the Effect of Internals on Optimizing Gas–solid Flow in a Circulating Fluidized Bed

Numerical study on flue gas–liquid flow with side-entering mixing

MODEL TEST AND NUMERICAL ANALYSIS OF FLOW FIELD IN SCR DENITRIFICATION SYSTEM IN SECOND-PHASE PROJECT OF SANHE POWER PLANT

CFD simulation and optimization of flow field and SO2 absorption in impinging stream scrubber

Experiment of Optimizing Gas-Particle Flow Regime in the Square-section Circulating Suspension Bed

Influence of Internals on Gas-solid Flow Behavior in Square-section Circulating Suspension Bed

Structure Optimization Research Based on Numerical Simulation of Flow Field in Ammonia-Based Wet Sintering Flue Gas Desulfurization

Experimental Study of Semi-dry Flue Gas Desulfurization in Circulating Suspension Fluidized Bed

Study on Flow Field Optimization in Wet Flue Gas Desulfurization Spray Scrubber

Simulation Of Hot Gas Desulfurization Reaction In Concurrent-, Countercurrent- And Cross-Flow Moving Bed Reactor

SIMULATION STUDY ON DESIGN OF INLET FLUE DUCT FOR SCR DENITRIFI CATION SYSTEM

D306 EXPERIMENTS AND MATHEMATICAL MODEL ON FLUE GAS DESULFURIZATION OF CIRCULATING FLUIDIZED BED