Abstract:This paper reports the critical role of microstructural length scale in dealloying for the fabrication of bimodal or monolithic functional nanoporous metal structures and the underlying mechanisms and kinetics. Two dual-phased (Al2CuAlCu) precursor alloys Al65Cu35 and Al55Cu45 (at.%) were selected to demonstrate the concept. Microstructural observations revealed that the two constituent phases Al2Cu and AlCu in each alloy can undergo either sequential dealloying, which leads to bimodal nanoporous Cu, or simultaneous dealloying, which results in monolithic nanoporous Cu. In-situ and ex-situ synchrotron X-ray diffraction (XRD), focused ion beam scanning electron microscopy (FIB-SEM), and potentiodynamic polarization scans were used to identify the detailed phase evolution processes and kinetics. It is concluded that microstructural length scale plays a decisive role in regulating the dealloying pathways. Sequential dealloying of Al2Cu and AlCu occurs when both phases are micrometer-scaled, while simultaneous dealloying takes over when both phases are nanoscaled. The nanosize effect of Al2Cu and AlCu can override their intrinsic difference in electrochemical potential at the micro- or macro-scale, and the advantage of tetragonal Al2Cu over monoclinic AlCu in crystallographic transition to face-centered-cubic (FCC) Cu by dealloying. The high-resolution in-situ synchrotron XRD data revealed a two-stage kinetic process for dealloying of Al2Cu to Cu. The Avrami-Erofe′ev kinetic model provides an excellent description of each stage. The underlying rationales and implications are discussed.

Fabrication of a Three-Dimensional Bimodal Porous Metal

Hierarchical Porous Cu with Trimodal Porosity Produced Through Investment Casting and Dealloying

Fabrication of A Hierarchical Trimodal Structure with Nano-Cellular Cu2o, Nano-Porous Cu and Micro-Porous Gasar Cu

Synthesis and mechanical properties of porous metals with inverted dealloying structure

Evolution of Porous Structure with Dealloying Corrosion on Gasar Cu–Mn Alloy

Fabrication and Compression Properties of Bulk Hierarchical Nanoporous Copper with Fine Ligament

Fabrication of a bimodal micro/nanoporous copper cladding layer by the high-speed laser cladding and dealloying

Fabrication of Nanoporous Metal by Selective Electrochemical Dealloying from Laser Cladding Cu-Mn Alloys

Three-dimensional Bicontinuous Nanoporous Materials by Vapor Phase Dealloying

Experimental Study on the Pore Structure of Directionally Solidified Porous Cu-Mn Alloy

Nanoporous Metals by Dealloying Multicomponent Metallic Glasses

Nanoporous Copper Fabricated by Dealloying Mn–Cu Precursors with Minor Nickel Element Addition and Heat Treatment Coarsening

Influence of the Solidification Temperature Range on Gasar Structures Made from Cu–Mn Alloys

Design and preparation of a massive trimodal porous silver by the combinational process of Gasar and dealloying

Refinement of Nanoporous Copper by Dealloying Mgcuy Amorphous Alloys in Sulfuric Acids Containing Polyvinylpyrrolidone

Influence of Solidification Mode on Pore Structure of Directionally Solidified Porous Cu-Mn Alloy

The Mechanism of Three-Dimensional Manganese-Based Nanoporous Structure Formation by Laser Deposition Coupled with Dealloying

Preparation, Characterization and Designing of Porous Ti–6Al–4V Through Metal Injection Molding Without Space Holder

Rapid preparation of micro/nano porous Cu/Cu 2 O particles through dealloying of powder sintered Cu-Al alloy

In-situ and Ex-Situ Synchrotron X-ray Diffraction Studies of Microstructural Length Scale Controlled Dealloying

High-strength hierarchical-structured bulk nanoporous Cu prepared by dealloying and spark plasma sintering