Abstract:This paper integrates a monitoring practice for the construction of a long-span continuous girder bridge to explore strain measurement and geometric shape control technology. In doing so, the actual stress of the bridge in the cantilever-construction stage is identified, and the influence of ambient temperature on the geometric shape control of the main girder is eliminated. According to linear creep theory, a strain correction method based on the superposition principle is proposed to remove the strain induced by concrete shrinkage and creep. By identifying the pattern of the solar thermal effect on the main girder geometry, a double in-situ measurement interpolation method is proposed to predict the adjusted value of formwork erection elevation. The results show that the deviation between the measured and corrected stress values on the root section of the main girder under the maximum cantilever state of the main girder is 16%–23%, which verifies the necessity of strain correction. The corrected values of measured stress on each controlled section are essentially identical to the calculated values, and both have consistent change patterns throughout the construction process, which verifies the validity of the strain correction method. During the cantilever-construction stage, the vertical deformation of the main girder owing to the solar thermal effect is parabolic and significant; hence, the main girder geometry should be measured prior to sunrise. The double in-situ measurement interpolation method can effectively eliminate the adverse effects of solar thermal when lofting the vertical formwork elevation in a non-ideal period.

Construction Monitoring and Control of Long-span Continuous Rigid Frame Bridge

The Construction Monitoring Simulation Analysis of Great Span Pre-stressed Concrete Continual Rigid Frame Bridge

Construction Monitoring and Control of Shunde Branch Bridge

Construction control research and analysis of the large span prestressed concrete continuous rigid frame bridge

Study of construction control for Heigou Super-large Bridge in Inner Mongolia

Construction Monitoring and Control of PC Composite Box-girder with Corrugated Steel Webs

Research into the Technique of Construction Monitoring for a Rigid-Frame and Cable-Stayed Composite Bridge

Construction Supervision of Pre-Stressed Rigid Frame Bridge Cantilever Casting

Stress monitoring analysis of the prestressed concrete continuous rigid frame bridge

Construction Monitoring and Control of Liuxihe Bridge

Research Of Full-Life Monitoring For Long Span-Bridge

Monitoring Technology for Prestressed Concrete Continuous Box Girder Bridges

Construction Monitoring for PC Composite Box-girder Bridge with Corrugated Steel Webs

SIMULATION FOR CONSTRUCTION PROCESS OF P.C. CONTINUOUS RIGID FRAME BRIDGE

Monitoring and Numerical Analysis for Construction Phase of a Steel-concrete Composite Continuous Box Girder Bridge

Monitoring and Control for Large Span Cable-stayed Bridge

Construction Monitoring Technology for Large-Span PC Continuous Box-Girder Bridge with Corrugated Steel Webs

LINEAR CONTROL OF VARIABLE SECTION CONTINUOUS RIGID FRAME BRIDGE

Key Construction Monitoring Technology for Long-Span Continuous Girder Bridge

Simulation Analysis for the Construction Control of the Dan-shui River Long-Span Bridge

Structural Health Monitoring System for a Complicated Long-Span Continuous Girder Bridge: Implementation and Demonstration