Abstract:The filter paper of automobile engine air filter is easy to temper and causes combustion. Flame retardant is usually added to the reinforced resin styrene-acrylic emulsion (SAE) to improve the flame-retardant performance of the air filter paper. Ammonium polyphosphate (APP) was used as material in this research, and multi-layer coated APP was prepared by microcapsule coating. A layer of nano-scale SiO 2 was coated and then introduced organosiloxane structure of the allyl polyoxypropylene ether side chain and boron. The chemical groups and structural composition were determined by Fourier transform infrared spectroscopy. TGA characterized the modified particles' high-temperature stability. By scanning electron microscopy and TEM, the morphologies of modified particles were analyzed to reveal the evolution of modified APP in SAE. Finally, nanoparticles with core-shell structures were formed. Applying the blended resin to the air filter paper, the flame-retardant performance was greatly improved. Total heat release (THR), heat release rate (HRR), peak heat release rate (pkHRR), mass loss rate (MLR), and effective heat of combustion (EHC) were reduced, respectively, by 30.8%, 30.7%, 42.0%, 16.7%, and 14.4%. The time to ignition (TTI) was doubled, so the fire spread could be effectively suppressed. Meanwhile, nano latex particles were attached to the interwoven fibers points and formed a “sea-island structure,” which significantly improved the paper’s mechanical properties, with bursting strength, tensile strength, stiffness, fracture work, and elongation increased by 18.60%, 5.72%, 10.64%, 17.00%, and 81.80%, respectively. It solved the problem that the inorganic flame-retardant particles often lead to the deterioration of the mechanical properties of paper.

Studies on Sythesis and Properties of Copolymer Emulsion Used As Engine Filter Paper Impregnant

Studies on Sythesis and Properties of Copolymer Emulsion Used as Engine Filter Paper Impregnant

Preparation and Application of a New-type ASA Emulsifier

Study On The Improvment Of The Water/Oil Repellency In The Filter Papers By The Core-Smell Fluoroacrylate Emulsions

Research of Styrene/Aerylonitrille/N-Phenlymaleimide Emalsion Copolymerization

Study on Silicone Modified Polyurethane-Acrylate Copolymer Emulstion

Research Progress of Emulsion Adhesives

Effects of Emulsifier Blends on Stability of Synthesized Emulsions Used in Automobile Filter Paper

THE STUDY OF SYNTHESIS AND BEHAVIOR OF POLYMER NANOMETER EMULSIONS--The Influence of Additives on Morphology of Emulsion Particle and Rate of Water-Absorbability of Film

Research on preparation and properties of a paper-based compound material containing PLA fiber

Synthesis of high oil-adsorption copolymer

Study on the Silicone-Acrylic Copolymer Emulsion

Progress on Synthesizing SiO_2/Polymer Nanocomposite Emulsion

Study on Kinetics of Styrene/Butyl Acrylate/Crosslinker Emulsion Copolymerization

Studies on Sythesis and Properties of Oil-resistant Sizing Agent Containing Fluorine

Study on the Preparation and Properties of Polyethylene Wax Ultrafine Micro-Emulsion

Modification of polyacrylate resin to prepare water‐soluble poly‐epoxy‐acrylate resin for its application as an automotive oil filter paper binder

A comprehensive study on the application properties of different soft, hard, and functional monomers to polyacrylate emulsion and water‐based inks

Preparation of Water-borne Lustering Oil on Printing Papers

Preparation, structure and application of styrene-acrylic emulsion/modified ammonium polyphosphate in flame retardant air filter paper

Study on Hydrosol for Paper Surface Using by Emulsion Polymerization