Abstract:Abstract During xerographic printing processes, the electric charge properties of the paper surface are essential to obtain effective toner transfer and high image quality. Surface and volume resistance are indispensable to the accumulation of the surface charge and different resistance values generate different electrical fields with optical drum, and have a significant effect on toner transfer efficiency. In this paper, surface sizing was investigated to improve the surface properties for better toner transfer and image quality. Styrene acrylate emulsion (SAE) latex was successfully synthesized and fully characterized with a Fourier transform infrared (FT-IR) spectrometer, a laser particle analyzer and a scanning electron microscope (SEM). The results showed that under the conditions of emulsifier dosage at 3 wt%, initiator concentration at 0.5 wt% and the reaction temperature at 80°C, the monomer conversion can reach 80%. The effects of various factors including initiator dosage, emulsifier dosage and monomer ratio on the sizing performance were studied. The effects of different ratios of SAE to starch on surface and volume resistance of paper were also systematically investigated. The differences in electric properties of various paper samples were quantified and their influence on paper-toner adhesion and print quality was clarified. Relationships between electrical properties of paper and paper-toner adhesion force, and thus print quality were established. Strategies to improve printing performance through effective control of paper electrical properties were also developed. It is concluded that the best printing quality and toner adhesion were achieved when the ratio of SAE to starch is between 1:10 and 2:10.

Study on Hydrosol for Paper Surface Using by Emulsion Polymerization

Synthesis Of Cationic Surface Sizing Agent And Its Application

Preparation and Application of a New-type ASA Emulsifier

Synthesis of Water-soluble Acrylic-Styrene Copolymer

Study on Silicone Modified Polyurethane-Acrylate Copolymer Emulstion

A comprehensive study on the application properties of different soft, hard, and functional monomers to polyacrylate emulsion and water‐based inks

STUDY OF SYNTHESIS AND PROPERTY OF STYRENE-ACRYLATE HYDROSOL (I) the Effects of Process and Reactive Ingredients on Stability and Property of Hydrosol

Preparation of Polyacrylate Emulsion with High Adhesion Properties by Adding Modified Silica Sol

Preparation of Water-borne Lustering Oil on Printing Papers

Synthesis of Sulphonated Polyacrylamide Used As Oil Displacement Agent and Study on Its Performance

STUDY OF SYNTHESIS AND PROPERTY OF STYRENE-ACRYLATE HYDROSOL(II) the Conversion and Rheological Property of Hydrosol

Preparation of starch-based styrene acrylate emulsion used as surface-treatment agent for decorative base paper

Synthesis and Application of Hydrophobically Associating Cationic Polyacrylamide

Synthesis of bio‐based modified amphoteric acrylate epoxy emulsion surface sizing agent via RAFT polymerization

The synthesis of styrene acrylate emulsion and its application in xerographic paper

Preparation and Properties of Polyester Modified Waterborne High Hydroxyl Content and High Solid Content Polyacrylate Emulsion

Study On The Improvment Of The Water/Oil Repellency In The Filter Papers By The Core-Smell Fluoroacrylate Emulsions

STUDY OF THE SYNTHESIS OF WATER-BORNE ACRYLIC COPOLYMER FOR MODIFICATION OF BOPET FILM

THE STUDY OF SYNTHESIS AND BEHAVIOR OF POLYMER NANOMETER EMULSIONS--The Influence of Additives on Morphology of Emulsion Particle and Rate of Water-Absorbability of Film

Synthesis Of Sulfonyl Fluorinated Macro Emulsifier For Low Surface Energy Emulsion Polymerization Application

Applied Research of Polymerizable Emulsifier in Acrylic Emulsion Polymerization