Abstract:The construction of cross passages using the tunnel boring machine (TBM) method represents an emerging construction technique with numerous advantages. However, owing to the scarcity of application instances, the safety control methodologies and the regulatory patterns concerning environmental impacts remain inconclusive. In this study, a cross passage excavated using the TBM method—the first of its kind in the Tianjin area—was investigated. We identified the key risk control measures for the construction and analysed the TBM operating parameters, monitored ground and building settlements, and monitored mainline tunnel deformations and mechanical responses, revealing the ground and tunnel structure deformation patterns. The following conclusions are drawn. (1) The ground surrounding the cross-passage break-out opening was stabilised by performing secondary grouting and small-range freezing, and the break-in opening was excavated using a completely enclosed steel sleeve. These measures prevented water and sand inflows during the excavation of the break-out and break-in openings in the silt and silty sand strata. (2) The torsional moment of the cutter disc was large during the break-out phase. Break-out mainline tunnel displacement monitoring data indicated that the thrust had a significant effect on the mainline tunnel during the break-out phase. (3) The TBM tunnelling caused ground loss. The ground settlement exhibited a U-shaped distribution along the cross-passage axis, with the maximum settlement being 10 mm. (4) During the break-out phase, the deformation of the break-out mainline tunnel exhibited a duck-egg-shaped distribution. The clearance convergence of the break-out mainline tunnel was within ± 4, and the clearance convergence of the break-in mainline tunnel was controlled within ± 1 mm.

Current Study Status and Developing Prospect of the Tunnel Boring Machine

TBM in the Future of China

Key Technologies of Shield Tunneling Machine and Present Status and Prospect of Test Rigs for Tunneling Simulation

Application and development of hard rock TBM and its prospect in China

Perspectives in Intelligentization of Tunnel Boring Machine (TBM)

Construction Technology and Development Tendency of Submerged Tubular Tunnel

Surface-wave geological exploration method based on Tunnel Boring Machine (TBM) drilling noise

The Study of the Construction Technology of a Long Tunnel with a Small Cross Section

Adaptive Modification of TBM Tunneling in Coal Mine Roadway and Disaster Control Technology for Complex Geological Conditions

Development of a Novel TBM Tunnelling Test Platform and Its Application in Rock–Machine Interaction Analysis

Review and Prospects of New Materials in Urban Underground Development

Feedback on a shared big dataset for intelligent TBM Part I: Feature extraction and machine learning methods

TBM tunneling strata automatic identification and working conditions decision support

Present Status and Prospect of the Study on Key Technologies of Tunnel Ahead and Station (shaft) Following Method

Effectiveness analysis of a novel rectangular tunnel boring machine with planetary transmission for box jacking

Safety and environmental impact control of cross passage construction in soft soil strata using tunnel boring machine method

Prediction of geological conditions for a tunnel boring machine using big operational data

Tunnel Information Constructionzone

Feedback on a shared big dataset for intelligent TBM Part II: Application and forward look

Tunnel-and-surface integrated seismic detection method based on passive and active sources: A case

Intelligent tunnelling robot system for deep-buried long tunnels