Abstract:The technical feasibility of drilling and blasting or TBM excavation method is the key to determine the underground engineering. In view of the high strength, high abrasiveness and good integrity of hard rock in site, and considering the damage of surrounding rock must be controlled within a reasonable range, the blasting combined with TBM method has been proposed here. While the combined method has been further carried out in Water Supply Project in Jilin to assess and evaluate it, which including single-hole blasting, five-hole blasting, eleven-hole blasting and blasting combined with TBM tests. It is found that some certain blasting tests is useful and essential to the combined method, as it can provide the blasting parameters designed for the combined method. The blasting of multi-hole simultaneous initiation with interval charge structure should be adopted strictly. Meantime, one roll of explosive in each blasting hole can produce obvious blasting phenomenon. Simultaneously, by means of vibration monitoring, borehole TV observation and sound wave measurement, it can be judged that the damaged degree is rather small. After pre-blasting, the average speed of TBM driving is 17.41 mm/min, increased by 42.3% than that of the previous cycle. It shows that the new method not only achieves a relative efficient excavation, but also rock damage has been controlled. Moreover, the shortcomings of low speed and high tool wear of TBM excavation in hard rock could be avoided and the excavation efficiency could be improved using the combined method. Therefore, it seems to be a practical technology, which can play full advantages of each existed method, while can avoid the defects of themselves. However, this new excavation technology needs further confirmation through more engineering verification. The results obtained in this paper have guiding significance and promising application in the underground excavation and other civil engineering.

Application and development of hard rock TBM and its prospect in China

TBM in the Future of China

Construction Technology and Application of TBM in Shengli Tunnel of Tianshan Mountain under poor geological conditions

Perspectives in Intelligentization of Tunnel Boring Machine (TBM)

Review and Prospects of New Materials in Urban Underground Development

Current Study Status and Developing Prospect of the Tunnel Boring Machine

Adaptive Modification of TBM Tunneling in Coal Mine Roadway and Disaster Control Technology for Complex Geological Conditions

A new excavation technology of blasting combined with TBM

Development of a Novel TBM Tunnelling Test Platform and Its Application in Rock–Machine Interaction Analysis

RISK ASSESSMENT AND RESPONSE OF TBM EXCAVATION IN DEEP BURIED FRACTURED ROCK MASS

Development and application of high-power advanced exploration drilling rig for coal mining TBM

Current status and geological conditions for the applicability of CBM drilling technologies in China: A review

Feedback on a shared big dataset for intelligent TBM Part II: Application and forward look

Geologic forward prospecting using improved tunnel-seismic-while-drilling method: A case study of the water supply project at Songhua River, Jilin, China

Hard-rock TBM jamming subject to adverse geological conditions: Influencing factor, hazard mode and a case study of Gaoligongshan Tunnel

Real-time perception of rock–machine interaction information in TBM tunnelling using muck image analysis

Numerical simulating of pre-grouting in multi-jointed rock mass in deep coalmine roadway excavated via TBM

Excavation method optimization and mechanical responses investigating of a shallow buried super large section tunnels: a case study in Zhejiang

Fast perception of rock mass strength and integrity in TBM tunnelling using in-situ penetration test

In situ experimental study on TBM excavation with high-pressure water-jet-assisted rock breaking

Surface-wave geological exploration method based on Tunnel Boring Machine (TBM) drilling noise