Abstract:The technical feasibility of drilling and blasting or TBM excavation method is the key to determine the underground engineering. In view of the high strength, high abrasiveness and good integrity of hard rock in site, and considering the damage of surrounding rock must be controlled within a reasonable range, the blasting combined with TBM method has been proposed here. While the combined method has been further carried out in Water Supply Project in Jilin to assess and evaluate it, which including single-hole blasting, five-hole blasting, eleven-hole blasting and blasting combined with TBM tests. It is found that some certain blasting tests is useful and essential to the combined method, as it can provide the blasting parameters designed for the combined method. The blasting of multi-hole simultaneous initiation with interval charge structure should be adopted strictly. Meantime, one roll of explosive in each blasting hole can produce obvious blasting phenomenon. Simultaneously, by means of vibration monitoring, borehole TV observation and sound wave measurement, it can be judged that the damaged degree is rather small. After pre-blasting, the average speed of TBM driving is 17.41 mm/min, increased by 42.3% than that of the previous cycle. It shows that the new method not only achieves a relative efficient excavation, but also rock damage has been controlled. Moreover, the shortcomings of low speed and high tool wear of TBM excavation in hard rock could be avoided and the excavation efficiency could be improved using the combined method. Therefore, it seems to be a practical technology, which can play full advantages of each existed method, while can avoid the defects of themselves. However, this new excavation technology needs further confirmation through more engineering verification. The results obtained in this paper have guiding significance and promising application in the underground excavation and other civil engineering.

RISK ASSESSMENT AND RESPONSE OF TBM EXCAVATION IN DEEP BURIED FRACTURED ROCK MASS

Study Of Surrounding Rock Damage Induced By Tunnel Boring Machine Driving Tunnel At West Route Of South To North Water Transfer Project

Research on geologic adaptive control of ground pressure for single gripping TBM

Effects of Driving Parameters on TBM Dynamic Response and Cracking of the Disc Cutter Ring: A Case Study

MONITORING AND CHARACTERISTICS STUDY OF STRESS EVOLUTION OF SURROUNDING ROCK DURING DEEP TUNNEL EXCAVATION

BIM-based Quantitative Assessment Method of Tunnel Collapse Risk in TBM Construction

Influence of in-situ stress on rock fragmentation by TBM cutters and prediction of TBM performance for deep tunnels

Prediction of fractured zones in deep roadway of coal mine excavated via TBM based on Measurement While Drilling method

Fast perception of rock mass strength and integrity in TBM tunnelling using in-situ penetration test

Semianalytical Analysis of Overexcavation and Critical Support Pressure for Support Design in TBM Tunneling through Squeezing Rock Condition

BRITTLE FAILURE OF SURROUNDING ROCK MASS IN DEEP TEST TUNNELS AND ITS NUMERICAL SIMULATION

A performance-oriented adaptability assessment method for TBM tunneling

A new excavation technology of blasting combined with TBM

Construction Technology and Application of TBM in Shengli Tunnel of Tianshan Mountain under poor geological conditions

A case study of TBM performance prediction using field tunnelling tests in limestone strata

Development of a Novel TBM Tunnelling Test Platform and Its Application in Rock–Machine Interaction Analysis

Study on Support Time in Double-Shield TBM Tunnel Based on Self-Compacting Concrete Backfilling Material

Safety and environmental impact control of cross passage construction in soft soil strata using tunnel boring machine method

Real-time perception of rock–machine interaction information in TBM tunnelling using muck image analysis

Mechanical Aspects of Construction of New TBM Tunnel Under Existing Structures

In situ experimental study on TBM excavation with high-pressure water-jet-assisted rock breaking