Abstract:Abstract The construction of tunnel portal not only has to face the challenges of complex geological conditions such as shallow buried and asymmetrically loaded, but also needs to consider the adverse effects of factors such as the layout form of the tunnel. Thus, the construction of portal has always been the difficulty and focus of tunnel engineering construction. Under the coupling of multiple adverse factors such as complex geological conditions and special layout form, the tunnel portal is prone to excessive deformation, supporting structures cracking and even collapse during the excavation. In this study, a shallow buried and asymmetrically loaded tunnel with small clear-distance in northwest China was taken as an engineering case. Aiming at the distresses of slope instability, peeling off and block falling of primary support concrete and cracking of secondary lining concrete in the tunnel portal construction, combined with field investigation, statistical analysis, numerical simulation and deformation monitoring, the failure mechanism of supporting structures was deeply studied, and the corresponding treatment measures were proposed. The research results indicated that the loose and broken gravel soil in the shallow buried section, asymmetrical loading, surface water infiltration, and short construction spacing between two tunnels were the main triggers of supporting structures failure. Affected by the topographic bias, the loose load generated by the surrounding rock on the deep buried side squeezed the entire tunnel to the shallow buried side after the portal excavation. And this deformation trend became more significant after the gravel soil was deteriorated by water immersion. The retaining wall produced a clockwise rotation deformation around the wall corner in the process of limiting the tunnel deviation, and the local wall body cracked due to the excessive tensile stress. The primary support concrete and secondary lining concrete produced excessive asymmetrical deformation because of the significant asymmetrical loading. The concrete with excessive deformation was cracked by obvious tensile or shear stress. The following tunnel excavation had a significant negative impact on the stability of the prior tunnel. Combining the failure mechanism of the supporting structures and the characteristics of the continuous development of cracks, the treatment measures of ‘stabilize the stratum first and then treat the cracks’ were proposed, including the backfilling and tamping the shallow buried side at tunnel portal, reinforcing the interlaid rock by ground surface grouting, setting intercepting ditch at the slope top, staggering a certain safe excavation distance between the following tunnel and the prior tunnel. The field monitoring and patrol inspection results indicated that the proposed treatment measures had achieved the expected results. The research results can provide corresponding construction experience and suggestions for similar projects in the future.

Present Status and Prospect of the Study on Key Technologies of Tunnel Ahead and Station (shaft) Following Method

Key techniques and important issues for slurry shield under-passing embankments: A case study of Hangzhou Qiantang River Tunnel

Key Technologies of Shield Tunneling Machine and Present Status and Prospect of Test Rigs for Tunneling Simulation

Failure mechanism and treatment measures of supporting structures at portal for a shallow buried and asymmetrically loaded tunnel with small clear-distance

Study on the Stress and Deformation of Surrounding Rock and Support Structure of Super Large Section Tunnels Based on Different Excavation Methods

Effect of foundation pit excavation and structural construction of new engineering on existing underlying tunnel

Research on Key Technology of Mechanical Construction of Connecting Passages

Study on the Control of Underground Rivers by Reverse Faults in Tunnel Site and Selection of Tunnel Elevation

Investigation on the Influence of Active Underpinning Process on Bridge Substructures During Shield Tunnelling: Numerical Simulation and Field Monitoring

Excavation method optimization and mechanical responses investigating of a shallow buried super large section tunnels: a case study in Zhejiang

Study on the application of a comprehensive technique for geological prediction in tunneling

REVIEW OF GROUND PENETRATING SHIELD TUNNEL'S CONSTRUCTION TECHNICAL

Construction Technique of Long-Span Shallow-Buried Tunnel Considering the Optimal Sequence of Pilot-Tunnel Excavation

The Study of the Construction Technology of a Long Tunnel with a Small Cross Section

Construction Method Optimization for Transfer Section Between Cross Passage and Main Tunnel of Metro Station

A shield tunneling method for enlarging the diameter of existing tunnels: Experimental investigations

Tunnel Information Constructionzone

Numerical simulation and analysis of construction behavior of shallow tunneling by excavation

Construction Technology for Deep Excavation of South Tibet Station of Shanghai Metro

A review of advanced detection methods for tunnels and roadways

Construction Technology of Pile Foundation for Subway Tunnel Crossing Bridge