Abstract:Diesel vehicle exhaust is one of the major contributors to ultrafine particles (UFPs) in urban areas in China. However, there is still a lack of knowledge about UFPs emission characteristics from current in-use diesel vehicles. This study has carried out an on-road test of 10 in-use Light-duty Diesel Trucks (LDDTs) with different emission control standards in China using a self-established portable measurement system based on the Electronic Low-pressure Impactor (ELPI) and characterized the ultrafine particle number (PN) concentration, particle size distribution and metal element contents. The results revealed a significant reduction of 93.37% in the average PN0.1 emission factor of LDDTs from China III to China VI. Notably, LDDTs compliant with the China VI vehicle emission control standard exhibited the lowest PN0.1 and PM0.1 emission factors, measuring 4.991 × 1014 #/km and 0.627 g/km, respectively. By taking into account emissions under real driving conditions, we found that the PN emission rates grow with the increase of the Vehicle Specific Power (VSP). The cold-start phase had higher PN emissions than the hot-start phase, with 8590, 1890, 477, and 22 times higher than those of the ambient air (1.18 × 105 #/cm3), respectively. The installation of Diesel Particulate Filter (DPF) can decrease UFPs by more than 99.8%, while the PN emission factor during the DPF regeneration stage (1.85 × 1016 #/km) increased by 5 orders of magnitude that of the DPF normal works (7.51 × 1011 #/km). Metal element contents analysis shows that Fe, Ca, Al and Mg are the dominant elements in UFPs of LDDT exhaust gas, but the element of Ni is slightly increasing in a China VI, possibly due to the new automotive engine exhaust manifolds being made of Ni instead of cast iron for the purpose of having more high-temperature resistance. Our study demonstrates the importance of monitoring and routine maintenance of exhaust after-treatment systems.

Application of Filter Type Smoke Meter to Diesel Engine Particulate Emission Control

Methodology of diesel particulate filter testing on test bed for non-road engine application

Dilution Sampling System of Particulate Measurement for Automotive Diesel Engine

Electrostatic vehicle exhaust particle sensor for the evaluation of the diesel particulate filter (DPF)

Study of the Influence of Methanol/f-T Diesel Combustion Particle Materiality Parameters on the Deposition Process in Diesel Particulate Filter Trap Units

Gas Emissions and Particulate Matter of Non-Road Diesel Engine Fueled with F-T Diesel with EGR

The Application of Two Closely Coupled DPFs as the After-treatment System

Numerical Investigation of the Fuel/Air Ratio Sensor Sensitivity in a Port-Fuel-Injected Spark-Ignition Engine Equipped with Three-Way Catalysts

Combined Ash and Soot Monitoring for Gasoline Particulate Filters Using a Radio-Frequency-Based Sensor

Considerations in Using Photometer Instruments for Measuring Total Particulate Matter Mass Concentration in Diesel Engine Exhaust

Emission Characteristics of Particulate and Gaseous Pollutants from a Light-Duty Diesel Engine with SDPF

Exploring ultrafine particle emission characteristics from in-use light-duty diesel trucks in China using a portable measurement system

Sensitivity Analysis of Fuel Types and Operational Parameters on the Particulate Matter Emissions from an Aviation Piston Engine Burning Heavy Fuels

A particle filter for ammonia coverage ratio and input simultaneous estimations in Diesel-engine SCR system

Characteristics of Particulate Matter Emissions from a Low-Speed Marine Diesel Engine at Various Loads

Experimental study on filtration and continuous regeneration of a particulate filter system for heavy-duty diesel engines.

Experimental Investigation on the Influence of Filtration Velocity on Particulate Deposition Characteristics in DPF

Comparison Study the Particulate Matter Characteristics in a Diesel/natural Gas Dual-Fuel Engine under Different Natural Gas-Air Mixing Operation Conditions

The investigation of diesel soot emission using instrument combination of multi-wavelength photoacoustic spectroscopy and scanning mobility particle sizer

Development and validation of a multi-angle light scattering method for fast engine soot mass and size measurements

A New Approach for Very Low Particulate Mass Emissions Measurement