Abstract:The quantitative role of aftertreatment technologies in particulate matter (PM)-induced toxicities remains unclear. This study reports the efficacy of aftertreatment technologies on PM-related toxicity as well as the chemical-specific contribution to PM-induced reactive oxygen species (ROS) generation. Polycyclic aromatic hydrocarbons (PAHs) contributed ∼68% of engine-out PM2.5-induced ROS generation. Implementation of a diesel oxidation catalyst (DOC) in a diesel engine could mitigate ∼76.2% of PAHs content per unit mass of PM2.5 and remove ∼28.1% of PM2.5-induced ROS generation. Furthermore, the addition of a diesel particulate filter (DPF) could stepwise reduce ∼21.7% of the PAH content and remove ∼52.2% of PM2.5-induced ROS generation. Due to the lack of aftertreatment control devices, shipping-emitted PM2.5 induced (7.4 ± 5.5)-fold higher ROS generation than those emitted from heavy-duty diesel vehicles at equal mass concentrations when burning the same diesel fuels, while the implementation of DOC and DPF devices on marine diesel engines could reduce 89.6 ± 3.6% of PM emissions and further mitigate 97.9 ± 34.6% of PM-induced ROS-adjusted emissions. These results suggest that the utilization of oxidation technologies in marine diesel engines would be an effective way to alleviate health burden risks.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acs.estlett.2c00069.Specifications of aftertreatment devices (Text S1); field measurements of ships (Text S2); analysis approach (Text S3); effects of aftertreatment devices on mass concentrations of PAHs (Text S4); composition discrepancies of PM2.5 emitted from ships and HDDVs (Text S5); unequal BaPeq and Creq values of PM2.5 emitted from ships and HDDVs (Text S6); specifications for the experimental engine (Table S1); parameters of tested heavy-duty diesel vehicles (Table S2); technical information on tested vessels (Table S3); substance names, abbreviations, and toxic equivalency factors (TEFs) for the 16 U.S. EPA priority PAHs (Table S4); 10 selected toxic metals, their abbreviations, and their TEFs estimated from carcinogenic risk parameters (inhalation unit risk) obtained from the U.S. EPA website (Table S5); major emission control measures used with heavy-duty diesel vehicles and ships during the past decade (Table S6); schematic diagram for a bench test of an engine and aftertreatment devices for the tested engine and sampling site locations (Figure S1); schematic diagram of the sampling system for ship emissions (Figure S2); schematic diagram of the sampling system for heavy-duty diesel vehicle emissions (Figure S3); mass concentrations of 16 PAHs per unit mass of PM2.5 observed at engine out, DOC out, DPF out, and ASC out (Figure S4); emission profiles of PM2.5 emitted from ships and heavy duty diesel vehicles (Figure S5); BaPeq and Creq values of ship- and HDDV-emitted PM2.5 (Figure S6) (PDF)This article has not yet been cited by other publications.

Characteristics of Particulate Matter Emissions from a Low-Speed Marine Diesel Engine at Various Loads

Characteristics of Particulate Matter Emissions for Low-Sulfur Heavy Oil Used in Low-Speed Two-Stroke Diesel Engines of Ocean-Going Ships

Variations and characteristics of carbonaceous substances emitted from a heavy fuel oil ship engine under different operating loads

Primary Particulate Matter Emitted from Heavy Fuel and Diesel Oil Combustion in a Typical Container Ship: Characteristics and Toxicity.

Physical Characteristics of Particle Emissions from a Medium Speed Ship Engine Fueled with Natural Gas and Low-Sulfur Liquid Fuels

Finer Particle Size Distribution and Potential Higher Toxicity of Elemental Carbon and Polycyclic Aromatic Hydrocarbons Emitted by Ships after Fuel Oil Quality Improvement

Particulate Matter (PM) and Parent, Nitrated and Oxygenated Polycyclic Aromatic Hydrocarbon (PAH) Emissions of Emulsified Heavy Fuel Oil in Marine Low-Speed Main Engine

A comprehensive study of particulate and gaseous emissions characterization from an ocean-going cargo vessel under different operating conditions

Impact of Fuel Aromatic Content on Soot Particle Physicochemical Properties of Marine Auxiliary Diesel Engine

Size-segregated Characteristics of Organic Carbon (OC), Elemental Carbon (EC) and Organic Matter in Particulate Matter (PM) Emitted from Different Types of Ships in China

On-board measurements of OC/EC ratio, mixing state, and light absorption of ship-emitted particles

Investigation of emission characteristics of a marine cargo ship in real-world conditions

Study on the real-world emission characteristics of gaseous and particulate pollutants from an inland ship using a portable emission measurement system

Comprehensive simultaneous shipboard and airborne characterization of exhaust from a modern container ship at sea

More Than Concentration Reduction: Contributions of Oxidation Technologies to Alleviating Aerosol Toxicity from Diesel Engines

Emission Factors for Gaseous and Particulate Pollutants from Offshore Diesel Engine Vessels in China

Emission factors of particulate and gaseous compounds from a large cargo vessel operated under real-world conditions.

Analysis of Marine Diesel Engine Emission Characteristics of Different Power Ranges in China

Characteristics of Marine Shipping Emissions at Berth: Profiles for Particulate Matter and Volatile Organic Compounds

Combustion Performance and Emission Characteristics of Marine Engine Burning with Different Biodiesel

Characteristics of Marine Shipping Emissions at Berth:Profiles for PM and VOCs