Abstract:Shipping emissions have significant influence on atmospheric environment as well as human health, especially in coastal areas and the harbour districts. However, the contribution of shipping emissions on the environment in China still need to be clarified especially based on measurement data, with the large number ownership of vessels and the rapid developments of ports, international trade and shipbuilding industry. Pollutants in the gaseous phase (carbon monoxide, sulfur dioxide, nitrogen oxides, total volatile organic compounds) and particle phase (particulate matter, organic carbon, elemental carbon, sulfates, nitrate, ammonia, metals) in the exhaust from three different diesel-engine-powered offshore vessels in China (350, 600 and 1600 kW) were measured in this study. Concentrations, fuel-based and power-based emission factors for various operating modes as well as the impact of engine speed on emissions were determined. Observed concentrations and emission factors for carbon monoxide, nitrogen oxides, total volatile organic compounds, and particulate matter were higher for the low-engine-power vessel (HH) than for the two higher-engine-power vessels (XYH and DFH); for instance, HH had NOx EF (emission factor) of 25.8 g kWh−1 compared to 7.14 and 6.97 g kWh−1 of DFH, and XYH, and PM EF of 2.09 g kWh−1 compared to 0.14 and 0.04 g kWh−1 of DFH, and XYH. Average emission factors for all pollutants except sulfur dioxide in the low-engine-power engineering vessel (HH) were significantly higher than that of the previous studies (such as 30.2 g kg−1 fuel of CO EF compared to 2.17 to 19.5 g kg−1 fuel in previous studies, 115 g kg−1 fuel of NOx EF compared to 22.3 to 87 g kg−1 fuel in previous studies and 9.40 g kg−1 fuel of PM EF compared to 1.2 to 7.6 g kg−1 fuel in previous studies), while for the two higher-engine-power vessels (DFH and XYH), most of the average emission factors for pollutants were comparable to the results of the previous studies, engine type was one of the most important influence factors for the differences. Emission factors for all three vessels were significantly different during different operating modes. Organic carbon and elemental carbon were the main components of particulate matter, while water-soluble ions and elements were present in trace amounts. The test inland ships and some test offshore vessels in China always had higher EFs for CO, NOx, and PM than previous studies. Besides, due to the significant influence of engine type on shipping emissions and that no accurate local EFs could be used in inventory calculation, much more measurement data for different vessels in China are still in urgent need. Best-fit engine speeds during actual operation should be based on both emission factors and economic costs.

Physical Characteristics of Particle Emissions from a Medium Speed Ship Engine Fueled with Natural Gas and Low-Sulfur Liquid Fuels

Characteristics of Particulate Matter Emissions from a Low-Speed Marine Diesel Engine at Various Loads

Characteristics of Particulate Matter Emissions for Low-Sulfur Heavy Oil Used in Low-Speed Two-Stroke Diesel Engines of Ocean-Going Ships

Emission Characteristics of Particulate Matter Emitted from 4- and 2-Stroke Marine Diesel Engines under the Background of Sulfur Emission Reduction.

Chemical Composition and Size Distribution of Particulate Matters from Marine Diesel Engines with Different Fuel Oils

Investigation of emission characteristics of a marine cargo ship in real-world conditions

Study on the real-world emission characteristics of gaseous and particulate pollutants from an inland ship using a portable emission measurement system

Characterization of Particle and Gaseous Emissions from Marine Diesel Engines with Different Fuels and Impact of After-Treatment Technology

On-board Measurements of Particle and Gaseous Emissions from a Large Cargo Vessel at Different Operating Conditions.

Finer Particle Size Distribution and Potential Higher Toxicity of Elemental Carbon and Polycyclic Aromatic Hydrocarbons Emitted by Ships after Fuel Oil Quality Improvement

Gaseous and Particulate Pollutant Emissions from Ocean-Going Tankers in the Context of Carbon Reduction: Main Engine, Auxiliary Engine, and Auxiliary Boiler

Comprehensive simultaneous shipboard and airborne characterization of exhaust from a modern container ship at sea

Emission Factors for Gaseous and Particulate Pollutants from Offshore Diesel Engine Vessels in China

Emission factors of particulate and gaseous compounds from a large cargo vessel operated under real-world conditions.

Combustion Performance and Emission Characteristics of Marine Engine Burning with Different Biodiesel

Particle Emissions from a Marine Diesel Engine Burning Two Kinds of Sulphur Diesel Oils with an EGR & Scrubber System: Size, Number & Mass

Particulate and Gaseous Emissions from a Large Two-Stroke Slow-Speed Marine Engine Equipped with Open-Loop Scrubber under Real Sailing Conditions

Experimental investigation on NOx and green house gas emissions from a marine auxiliary diesel engine using ultralow sulfur light fuel

Characterization of PM2.5-bound Polycyclic Aromatic Hydrocarbons and Their Derivatives (Nitro-and Oxy-Pahs) Emissions from Two Ship Engines under Different Operating Conditions.

Aerosol emissions from a marine diesel engine running on different fuels and effects of exhaust gas cleaning measures

Impact of Fuel Aromatic Content on Soot Particle Physicochemical Properties of Marine Auxiliary Diesel Engine