Abstract:In this study, stable and non-defective multilayer polydimethylsiloxane (PDMS) composite pervaporation mixed matrix membranes incorporated with in-situ transformed metal organic frameworks was successfully synthesized via ligand vapor phase infiltration and spin-coating. Metal zinc sources were uniformly distributed in PDMS which were in-situ transformed into homogeneous zeolitic imidazolate framework-8 (ZIF-8) nanoparticles, effectively alleviating the aggregation of ZIF-8. Thermal cross-linking of PDMS and the formation of MOFs occurred simultaneously, omitting the complicated preparation and re-dispersion steps of MOF nanoparticles. MOF nanoparticles and PDMS formed a more stabilized composite structure by in-situ transformation, in which PDMS and metal of MOFs can interact with the - Si - O - of silane coupling groups on membrane surface to construct solid multilayer composite membrane, ensuring long-term stability. Moreover, with the aid of hydrophobic interlayer, polymer infiltration into channels of substrate was restricted and casting solution spread out smoothly, facilitating the formation of defect-free PDMS selective layer. Various techniques including Attenuated Total Reflection-Fourier Transform Infrared Spectrometer, Field Emission Scanning Electron Microscopy, Atomic Force Microscope and X-ray Diffraction were applied to explore the morphology, composition and structure of nanoparticles and membranes, and pervaporation tests were taken to investigate the behavior of hydrophobic polymer-based multilayer membranes. For the recovery of low concentration n -butanol, the prepared nondefective multilayer TAO/ZIF-8/K-PDMS composite membrane displayed excellently total permeate flux of 2890 g m - 2 h -1 with competitive separation factor of 40.3.

Research Progress in Preparation and Modification of Silicone Rubber Pervaporation Membranes

Research Progress of Separation Mechanism and the Affecting Factors of Pervaporation Through Zeolite Membrane

Progresses in the Modification and Application of Poly(vinyl Alcohol) Membrane

Separation of Ethanol from Ethanol/Water Mixtures by Pervaporation with Silicone Rubber Membranes: Effect of Silicone Rubbers

Progress in the Molecular Simulation for Pervaporation Membrane

Application of Response Surface Methodology(RSM) to Optimize the Preparation Conditions of PDMS/PVDF Composite Membranes

Preparation of Silane Modified PDMS/Silicalite Hybrid Membrane and Its Pervaporation for Dilute Ethanol-Water Solution

Preparation of Modified Mesoporous MCM-41 Silica Spheres and Its Application in Pervaporation

Pervaporation performance of PDMS composite membranes for separation of ethanol/water mixtures(Ⅱ)and effect of membrane preparation conditions

Preparation of Stable Multilayer PDMS Composite Pervaporation Membrane Incorporated with In-Situ Transformed Metal Organic Frameworks for Enhanced Butanol Recovery

Preparation and characterization of silane modified PDMS/silicalite hybrid membrane

Preparation and pervaporation performance of PVA membrane with biomimetic modified silica nanoparticles as coating

Preparation of Silicone Polymer Membrane for Separation of Solvents from Lube Oil

Combining dip-coating and rotate-drying to preparation of PDMS on SiC tubular support with macropore for high pervaporation performance

Modification Methods Categorization of Polymeric Membranes for Pervaporation: A Review

Designing High-Performance Pervaporation Membranes with Hierarchical Hydrophobic-Hydrophilic Coating Layers

Waterborne Polyurethane/poly(vinyl Alcohol) Membranes: Preparation, Characterization, and Potential Application for Pervaporation

Pervaporation Separation of Ethanol/water Mixtures with Chlorosilane Modified Silicalite-1/Pdms Hybrid Membranes

A Study on Pervaporation Dehydration from Cycle-Silicone

Pervaporation Performances of Polydimethylsiloxane Membranes for Separating Dimethyl Carbonate/methanol Mixtures

Progress in Chitosan Pervaporation Membranes