Abstract:Membrane-based pervaporation (PV) for organic solvent dehydration is of great significance in the chemical and petrochemical industries. In this work, high-aluminum ZSM-5 zeolite membranes were synthesized by a fluoride-assisted secondary growth on α-alumina tubular supports using mordenite framework inverted (MFI) nanoseeds (~110 nm) and a template-free synthesis solution with a low Si/Al ratio of 10. Characterization by XRD, EDX, and SEM revealed that the prepared membrane was a pure-phase ZSM-5 zeolite membrane with a Si/Al ratio of 3.8 and a thickness of 2.8 μm. Subsequently, two categories of PV performance parameters (i.e., flux versus separation factor and permeance versus selectivity) were used to systematically examine the effects of operating conditions on the PV dehydration performance of different organic solvents (methanol, ethanol, n-propanol, and isopropanol), and their PV mechanisms were explored. Employing permeance and selectivity effectively disentangles the influence of operating conditions on PV performance, thereby elucidating the inherent contribution of membranes to separation performance. The results show that the mass transfer during PV dehydration of organic solvents was mainly dominated by the adsorption–diffusion mechanism. Furthermore, the diffusion of highly polar water and methanol molecules within membrane pores had a strong mutual slowing-down effect, resulting in significantly lower permeance than other binary systems. However, the mass transfer process for water/low-polar organic solvent (ethanol, n-propanol, and isopropanol) mixtures was mainly controlled by competitive adsorption caused by affinity differences. In addition, the high-aluminum ZSM-5 zeolite membrane exhibited superior PV dehydration performance for water/isopropanol mixtures.

Research Progress of Separation Mechanism and the Affecting Factors of Pervaporation Through Zeolite Membrane

Effect of Post-Treatment in the Hydrochloric Acid Solution on the Pervaporation Performance of Mordenite Membranes

A study on the pervaporation of water–acetic acid mixtures through ZSM-5 zeolite membranes

Zeolite Mfi Membranes for Separation of Ethanol/Water Mixture

Membrane separation process—Pervaporation through zeolite membrane

The influence of nanoseeds on the pervaporation performance of MFI-type zeolite membranes on hollow fibers

Research Progress in Gas Separation and Purification Based on Zeolitic Materials

Mass transfer model, preparation and applications of zeolite membranes for pervaporation dehydration: A review

Zeolite NaA membranes supported on alumina hollow fibers: Effect of support resistances on pervaporation performance

Progress In The Research Of Zeolite Membrane On Gas Separation

Advances in Separation by Pervaporation

Advance in zeolite membrane research

Progress in Zeolite Membranes

Influences of adding organic intermediate layer on membrane formation and properties

Preparation and pervaporation performance of hollow fiber supported SAPO-34 zeolite membranes

Pervaporation Dehydration Mechanism and Performance of High-Aluminum ZSM-5 Zeolite Membranes for Organic Solvents

Preparation of zeolite MFI membranes on alumina hollow fibers with high flux for pervaporation

Microstructure Manipulation of MFI-type Zeolite Membranes on Hollow Fibers for Ethanol–water Separation

Effects of Sodium Ions on the Separation Performance of Pure-Silica MFI Zeolite Membranes

Progress of Membrane Separation for Xylene Isomers

Synthesis optimization and separation mechanism of ZSM-5 zeolite membranes for pervaporation dehydration of organic solvents