Abstract:1 General Introduction A key to the realization of effective microwave tunable devices, among others, is to develop adaptive materials with superior adjustability of electromagnetic parameters. Since there are two fundamental electromagnetic parameters, namely, permittivity and permeability, the tunable property can then be readily approached by manipulating (i) permittivity directly via the electric field, such as in ferroelectrics and conducting polymer [1, 2], or (ii) permeability via magnetic field, such as in ferromagnetic materials [3], or (iii) permittivity (permeability) indirectly by magnetic field (electric field) such as in multiferroics [4]. A unique class of composite materials is considered here to realize such tunable properties: ferromagnetic microwires with excellent soft magnetic properties and giant magnetoimpedance effect [5,6] were introduced into a polymer matrix material so that an indirect control of permittivity can be tuned by the magnetic field. The principle is that the magnetic field can induce significant variation of the impedance via the skin effect at high frequency. The current distribution along the wire then changes accordingly and induces the dipolar polarization [7]. There have been a few relevant studies on this subject in the open literature. Panina et al. [8] and Acher et al. [9] used the microwire arrays to realize the left-hand materials and tunable properties in the presence of magnetic field. Starostenko et al. [10] gave an in-depth discussion of the magnetic bias effect on the permittivity for random wire composites and proved the feasibility of using the wire composites to control attenuation. Di et al. [11], Marin et al. [12] and Zhang et al. [13] have demonstrated the perspective of microwire composites as microwave absorbers. In addition, our previous studies have shown that this kind of composite prove to be multifunctional for a wide range of potential engineering applications such as sensing and structural health monitoring (see e.g. [14-16]). The aim of this paper is to utilize instrumentation [17] dedicated to precise in-situ measurements of electromagnetic parameters to characterize the microwire composites over a broad frequency range and the field effect on the microwave behaviors of the wire composites for potential structural health monitoring (SHM) application.

Two-probe Electrical Measurements in Transmission Electron Microscopes--behavioral Control of Tungsten Microwires

Thermal Characterization of Microscale Conductive and Nonconductive Wires Using Transient Electrothermal Technique

The Art of Electrochemical Etching for Preparing Tungsten Probes with Controllable Tip Profile and Characteristic Parameters

Manipulation and Four‐probe Analysis of Nanowires in UHV by Application of Four Tunneling Microscope Tips: a New Method for the Investigation of Electrical Transport Through Nanowires

J212015 Quantitative Evaluation of Conductivity of Metallic Nanowires by Microwave Atomic Force Microscopy

In Situ Probing Mechanical Properties of Individual Tungsten Oxide Nanowires Directly Grown on Tungsten Tips Inside Transmission Electron Microscope

Field/stress Tunable Behaviour of Composites Containing the Combined Current-Modulation Annealed Ferromagnetic Microwires

Probing Electrical Transport in Nanomaterials: Conductivity of Individual Carbon Nanotubes

Methodology for Measurement of Submicron Metallic Wire's Local Electrical Conductivity by Applying Four-points AFM Probe Technique

Quantitative Measurement of Submicrometre Electrical Conductivity

Non-contact Local Conductivity Measurement of Metallic Nanowires Based on Semi-Near-field Reflection of Microwave Atomic Force Microscopy

Fabrication of Tungsten nanoprobes by Electrochemical etching: Role of cathode geometry and their use as electrical probe

Characterization of Micro-Contact Resistance Between A Gold Nanocrystalline Line and A Tungsten Electrode Probe in Interconnect Fatigue Testing

Robust Ohmic contact junctions between metallic tips and multiwalled carbon nanotubes for scanned probe microscopy

Iontronic microscopy of a tungsten microelectrode: "seeing" ionic currents under an optical microscope

Microwave tunable composites with melt-extracted magnetic microwires

Operando two-terminal devices inside a transmission electron microscope

T0301-2-5 Modifying the Structure of Microwave AFM Probe for Improving the Sensitivity in the Measurement of Electrical Properties

J0610104 Evaluation of Interatomic Force on the Tip of Probe by Using Microwave Atomic Force Microscope

Electrical, Optical and Ionic Probe Inside Transmission Electron Microscope

Manipulation of Metallic and Semiconducting Nanowires with FETEM